DP14528 300mm Diamond Blade for Asphalt & Very Abrasive Materials Sitetuff

DP14528 - 300mm x 3.0 x 12 x 20mm Suitable to be used with hand help cut off saws. Suitable to be used on; Asphalt, Asphalt over concrete, Concrete - Green (Up to 24 hours old) Concrete - Roof Tiles, Concrete Blocks - Lightweight 3 to 7 newton, Concrete Blocks - Medium Density 7 to 12 newton, Gritstone, Sandstone - Abrasive. Ideal for utility contractors, civil engineers and general building work. The STA-12 is designed for use on highly abrasive materials such as asphalt, cement screed, lightweight concrete blocks and grit stone.

768023 Diamond Disc DIA THERMO-D130

For RG 130 ECI, RG 130, RGP 130, AGP 125. 130 mm diameter. 25/22.2 mm bore. Segment height 3.00 mm.The DIA Thermo Premium D130 diamond disc for the RG 130 is particularly well suited to materials that are difficult to sand off, which smear when sanding due to heat. Due to the arrangement of the diamonds, the material is scraped rather than sanded, and the disc consequently cannot get clogged – very fast removal can be achieved. The quick way to the best results.    Sands with thermoelastic coatings – no clogging of the disc, no adherence    Long service life thanks to extremely high-quality and temperature-resistant diamonds    Easy disc replacement in just a few steps    for removing thermoelastic materials

DP16738 9 Inch 230 x 22.2mm Root Cutting Angle Grinder Carbide Terrsaur Blade P6-TS

DP16738. 230mm x 22.2mm x 3.5mm. Ideal for roots, soil, railway sleepers, small trees and branches. For use on a hand held angle grinder. Carbide cluster blade.

DP16740 300mm x 20mm Stonesaw Root Cutting Terrasaur Root Cutting Blade

DP16740. 300mm x 20mm x 3.8mm. Ideal for roots, soil, railway sleepers, small tress and branches. For use on a hand held stonesaws. Carbide cluster blade.    

DP16841 P6-PT 230mm Porcelain Tile Cutting Blade

Premier Diamond Products DP16841  P6-PT Porcelain Tile Cutting Blade 230 x 1.8 x 10 x 22.2 (9") Suitable for use on the following Tiles; Ceramic, Granite, Limestone, Marble, Porcelain and Slate

GT11100 P5-STEEL 355 x 2.4 x 2 x 25.4mm 66T

TCT blades for steel - for evosaw355 & other low-revving chop saws performance level - premium Suitable for EVOSAW355 Steel cutting: Mild steel, pipe, tube, square sections, angle iron & other ferrous metals.  

STB-10 Diamond Blade For Building Materials

DP14510 - 115mm x 2.2 x 22.2mm DP14511 - 125mm x 2.2 x 22.2mmDP14512 - 230mm x 2.6 x 22.2mmDP14514 - 300mm x 2.8 x 20mm Suitable to be used with angle grinder, hand held disc cutter, floor saw, saw bench, brick saw, table saw and wall chaser Suitable for us on: Standard facing bricks, Concrete - beams, kerbs, pipes and slabs, Concrete - block paving, Concrete - flag stones, Concrete - flint aggregate, Concrete - general purpose, Concrete - light steel reinforcement, Concrete - roof tiles, Concrete Block - medium density 7-12 Newton, Cement Screed and York Stone. Images shown may vary to size.

STC-15 SiteTuff Diamond Blade For Concrete & Building Materials

DP14498 - 115mm x 2.2 x 22.2mm DP14499 - 125mm x 2.2 x 22.2mmDP14500 - 230mm x 2.6 x 22.2mmDP14503 - 300mm x 2.8 x 20mm 15mm Turbo Segments, high grade steel centre, cooling holes, fast cutting and long life Suitable to be used with angle grinder, hand held disc cutter, floor saw, saw bench, brick saw, table saw and wall chaser Suitable for us on: Standard facing bricks, Concrete - beams, kerbs, pipes and slabs, Concrete - block paving, Concrete - flag stones, Concrete - flint aggregate, Concrete - general purpose, Concrete - light steel reinforcement, Concrete - roof tiles, Concrete Block - medium density 7-12 Newton, Cement Screed and York Stone. Images shown may vary to size.

STPT-8 SiteTuff Continuous Rim Diamond Porcelain & Ceramic Tile Blade

DP14480 - 115mm x 1.4 x 8.0 x 22.2mm DP14481 - 125mm x 1.4 x 8.0 x 22.2mm Suitable to be used with electric and cordless angle grinders. Suitable for us on: Clay Products, Granite - Blocks & Worktops, Limestone, Marble - Blocks & Worktops, Tiles - Ceramic, Tiles - Granite, Tiles - Limestone, Tiles - Marble, Tiles - Porcelain, Tiles - Slate. Images shown may vary to size.

STT-10 SiteTuff Continuous Rim Turbo Diamond Blade for Concrete & Building Materials

DP14520 - 115mm x 2.0 x 10 x 22.2mm DP14521 - 125mm x 2.0 x 10 x 22.2mmDP14522 - 230mm x 2.4 x 10 x 22.2mmDP14523 - 300mm x 3.0 x 10 x 20mm Suitable to be used with angle grinders, wall chasers and hand held saws. Suitable for us on: Bricks - Class A Engineering, Bricks - Class B Engineering, Bricks - Standard facing bricks, Clay Products, Concrete - Beams, Kerbs, Pipes & Slabs, Concrete - Block Paving, Concrete - Flag Stones, Concrete - Flint Aggregate, Concrete - General Purpose, Concrete - Heavy Steel Reinforcement, Concrete - Light Steel Reinforcement, Concrete - Roof Tiles, Concrete Blocks - Lightweight 3 - 7 Newton, Concrete Medium Density 7 to 12 Newton, Concrete Blocks - Solid Density 12+ Newton, Gritstone, Limestone, Sandstone - Abrasive, Sandstone - Indian, Tiles - Slate, York Stone.

WDA230 230mm x 22mm Bore 9 Inch Premium Blue WDA Diamond Blade For Concrete

WDA230 230mm blade size 9 inch 22.23mm bore size for use on light masonry, concrete, stone and reinforced concrete

WDA300/20 300mm x 20mm Bore 12 Inch Premium Blue WDA Diamond Blade For Concrete

WDA300/20 300mm blade diameter 12 inch 20mm bore size for use on concrete, light masonry, stone and reinforced concreter materials.

WDA300/22 300mm x 22mm Bore Diamond Bade Premium Blue For Concrete

WDA300/22 300mm blade 22mm bore size for use on light masonry, concrete, stone and reinforced concrete

WDC115 4.5" Concrete Diamond Blade – 115mm x 22.23mm Dry Cut Disc

WDC115 115mm diameter blade 4 1/2 inch 22.23mm bore centre dry cut blade for use on light masonry, concrete and stone

WDC230 230mm x 22,23mm 9 Inch Concrete Diamond Blade Dry Cut

WDC230 230mm diameter blade 22.23mm bore centre dry cut blade for use on light masonry, concrete and stone

WDHFS350 350mm x 25mm Floor Saw Diamond Blade Hard Materials

WDHFS350 350mm 14 inch blade 25mm bore size for use on a floor saw for cutting light masonry, concrete, stone materials

WDMP115 4.5" Diamond Blade – 115mm x 22mm Bore Dry & Wet Multipurpose Cutting

WDMP115 115mm 4 1/2 inch blade 22mm bore centre dry / wet use for concrete, stone, reinforced concrete and hard masonry

WDMP230 9" Diamond Blade – 230mm x 22mm Bore Dry & Wet Cutting Disc

wdmp230 230mm blade size 9 inch 22mm bore centre dry / wet use for concrete, stone, reinforced concrete and hard masonry

WDT300/20 300mm x 20mm Bore 12 Inch Asphalt Tarmac Diamond Blade

WDT300/20 300mm blade size 12 inch 20mm bore size for cutting asphalt, tarmac, concrete and stone materials

WDTA115 115mm x 22mm Bore 4 1/2 Inch Turbo Allmat Diamond Blade

wdta115 115 x 22.22mm bore 4 1/2 inch for use on concrete, stone,steel, cast iron  

WDTA230 230mm x 22.23 9 Inch Turbo Allmat Diamond Blade

wdta230 230mm x 22.22mm bore 9 inch for use on concrete, stone,steel, cast iron, reinforced concrete

WDV230 230 x 22.23mm Bore 9 Inch Value Diamond Blade

WDV230 230mm x 22.23 bore size 9 inch blade ideal for use on light masonry and concrete  

WDVP230 9" Diamond Blade – 230mm x 22.23mm Bore Value Plus Cutting Disc

WDVP230 230mm diameter 9 Inch 22.23mm bore centre for use on light masonry, concrete and stone

WDVP300/20 300mm x 20mm Bore Value Plus Diamond Blade

WDVP300/20 300mm diameter 20mm bore centre for use on light masonry, concrete and stone

WDVP300/78 300mm x 7/8 22mm Bore Diamond Blade Value Plus

WDVP300/78 300mm blade diameter 12 Inch 7/8 bore size 22mm for use on light masonry, concrete and stone