195562-2 Offset Base For RT0700 and DRT50
Replicable plastic base assembly. For use with the DRT50 or RT0700. Cut close to edges or corners (18.5mm).
3/61 x 1/4TC Professional Two Flute Cutter 10mm Diameter
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.Specifications Diameter 10mmCutting Depth 25mmOverall Length 57mmShank Diameter 1/4"
3/83x1/2TC Professional Two Flute Cutter 12.7mm Diameter
TCT extra long cutter.Two flutes give a clean finish to cut edges. Use only on professional routers with 80mm deep plunge and suitable one piece multi-slit collet to ensure safe cutter retraction into base.Specifications Diameter 12.7mmCutting Depth 50mmOverall Length 108mmShank Diameter 1/2"This cutter does not have a TCT centre tip and is not suitable for plunging abrasive materials.
492601 FS-OF1400 Guide Rail Adapter
492601 to fit the of1400 router With fine adjustment Support for router without guide rods.
492636 Parallel Side Fence SA-OF1400 Router
492636 side fence for use on the of1400 router ideal for routing parallel to a workpiece edge
494681 Guide rail adapter FS-OF 2200
494681 for use on the of2200 router allows the router to fit onto the guide rail perfect straight Without guide rods ST-OF 2200/2. With fine adjustment and support plate for router.
498979 10 Piece Router Bit Set Box-OF HW S8 Mix
498979 Flush trim cutter HW D12.7/NL25 KL dowel drill HW D5 x 30 Z Groove cutter HW D10/20 with drill point groove cutter HW D18/30 with drill point Round over cutter HW D16.7/R2 KL classic ogee cutter HW D25.5 R6.3 KL Roundover cutter HW D31.7/R9.5 KL chamfer cutter HW D36/45Grad KL disc groove cutter HW D40 x 4 dovetail cutter HW D14.3/15° in carton
578055 Light Module To Fit The OF1010 Router
578055 fits the of1010 router light ring rechargeable using standard usb-c cable
578376 HW R1-OFK500 Z1 Roundover Cutter
578376 27MM Diameter 1mm radius 1 tooth for rounding plastic or solid wood edging finishing off solid wood for use with the ofk500 or ofkc500 machines
578377 HW R2-OFK500 Z1 Round Over Cutter
578377 27mm diameter 2mm radius for use on the ofk500 ideal for rounding plastic or solid wood edging or finishing off solid wood edge work
578378 HW R3-OFK500 Z1 Round Over Cutter D27 R3
578378 Round over cutter 27mm diamter 3mm radius ideal for edging on solid wood or plastic for use with the ofkc500
578683 Extraction Bonnet with Light Module For OF1400 Router
578683 for use on the of1400 router extraction bonnet with light module 8 x led 25/50 lumens usb-c charging port
6 Piece Router Cutter Set 1/2 Shank 12.7mm
4932493579 6 piece cutter set 1/2 shank laser marked shanks with dimensions micro grain diamond ground carbide for shaper edges and better finish
Dremel 2615061232 Pack of 1 Shank: 3.2mm Working Diameter: 9.5mm Working Length: 4.8mm Accessory Length: 37mm Material: High Speed Steel Usage: Piloted Beading Maximum RPM: 35,000 1/min
Dremel 2615061532 Pack of 1 Shank: 3.2mm Working Diameter: 9.5mm Working Length: 4.8mm Accessory Length: 37mm Material: High Speed Steel Usage: Corner Rounding Maximum RPM: 35,000 1/min
Dremel 2615064032 Pack of 1 Shank: 3.2mm Working Diameter: 6.4mm Working Length: 2mm Accessory Length: 37mm Material: High Speed Steel Usage: V-Groove Maximum RPM: 35,000 1/min
650 3.2mm HSS Router Cutter Bit
2615065032 3.2mm hss straight router bit
2615065432 6.4mm working diameter 3.2mm shank 2mm working length straight cut for routing or grooving
Dremel 26150655JA Pack of 1 Shank: 3.2mm Working Diameter: 8mm Working Length: 2.7mm Accessory Length: 37mm Usage: Keyhole router bit Maximum RPM: 35,000 1/min
Angle Stop FS-WA For Guide Rail 577040
577040- Angle stop FS-WA to suit the Festool guide rail
BR01X1/2TC 1/2" Shank TCT Two Flute Straight Worktop Router Cutter 12.7mm x 50mm
Trend BR01X1/2TC 1/2" Shank TCT Two Flute Straight Worktop Router Cutter 12.7mm x 50mm
BSC/0/100 Biscuit No. 0 Pack of 100
Trend biscuits are made of die cut beech. Beechwood biscuits which expand when in contact with a woodworking adhesive such as PVA glue. They are ideal for strong, fast, and accurate jointing of hard and soft woods, plywood and composition board.Compared to doweling, biscuit jointing is faster and more precise. Specifications Size 47.5mm x 15.5mm x 4mmFor Board Thickness 8mm - 12mm
BSC/10/100 Biscuit No. 10 Pack of 100
Trend biscuits are made of die cut beech. Beechwood biscuits which expand when in contact with a woodworking adhesive such as PVA glue. They are ideal for strong, fast, and accurate jointing of hard and soft woods, plywood and composition board.Compared to doweling, biscuit jointing is faster and more precise. Specifications Size 53mm x 19mm x 4mmFor Board Thickness 13mm - 18mm
BSC/20/100 Biscuit No. 20 Pack of 100
Trend biscuits are made of die cut beech. Beechwood biscuits which expand when in contact with a woodworking adhesive such as PVA glue. They are ideal for strong, fast, and accurate jointing of hard and soft woods, plywood and composition board.Compared to doweling, biscuit jointing is faster and more precise. Specifications Size 60 mm x 23 mm x 4 mmFor Board Thickness 13mm - 19mm +
BSC/20/1000 Biscuit No. 20 Pack of 1000
Trend biscuits are made of die cut beech. Beechwood biscuits which expand when in contact with a woodworking adhesive such as PVA glue. They are ideal for strong, fast, and accurate jointing of hard and soft woods, plywood and composition board.Compared to doweling, biscuit jointing is faster and more precise. Specifications Size 60 mm x 23 mm x 4 mmFor Board Thickness 13mm - 19mm +
BSC/MIX/100 Biscuit Mixed 0 10 20 Pack of 100
Trend biscuits are made of die cut beech. Beechwood biscuits which expand when in contact with a woodworking adhesive such as PVA glue. They are ideal for strong, fast, and accurate jointing of hard and soft woods, plywood and composition board.Compared to doweling, biscuit jointing is faster and more precise. SpecificationsSize 0 47.5mm x 15.5mm x 4 mmFor Board Thickness 8mm - 12mmSize 10 53mm x 19mm x 4mmFor Board Thickness 13mm x 18mmSize 20 60mm x 23mm x 4mmFor Board Thickness 19mm +
C002X1/4TC 1/4" Shank Two Flute Router Cutter 4mm Diameter
Trend C002X1/4TC Two Flute Router Cutter 4mm Diameter 1/4" Shank straight router cutter - 4mm diameter solid carbide insert
C005X1/4TC 1/4" Shank Two Flute Router Cutter 6mm Diameter
Trend C005X1/4TC Two Flute Router Cutter 6mm Diameter 1/4" Shank straight router cutter - 6mm diameter two flute carbide tips
C008X1/4TC 1/4" Shank Two Flute Router Cutter 6.3mm Diameter
Trend C008X1/4TC Two Flute Router Cutter 6.3mm Diameter 1/4" Shank straight router cutter - 6.3mm diameter two flute carbide tips.
C012AX1/4TC 1/4" Shank Two Flute Router Cutter 8.0mm Diameter
Trend C012AX1/4TC Two Flute Router Cutter 8.0mm Diameter 1/4" Shank straight router cutter - 5/16" diameter two flute carbide tips.
C013X1/4TC 1/4" Shank Two Flute Router Cutter 9.5mm Diameter
Trend C013X1/4TC Two Flute Router Cutter 9.5mm Diameter 1/4" Shank straight router cutter
C015X1/4TC 1/4" Shank Two Flute Router Cutter 9.5mm Diameter
Trend C015X1/4TC Two Flute Router Cutter 9.5mm Diameter 1/4" Shank straight router cutter - 3/8" diameter two flute carbide tips.
C016CX1/4TC 1/4" Shank Two Flute Router Cutter 10mm Diameter
Trend C016CX1/4TC Two Flute Router Cutter 10mm Diameter 1/4" Shank straight router cutter - 10mm diameter two flute carbide tips.
C016X1/4TC 1/4" Shank Two Flute Router Cutter 10mm Diameter
Trend C016X1/4TC Two Flute Router Cutter 10mm Diameter 1/4" Shank straight router cutter - 10mm diameter two flute carbide tips.
C019AX1/4TC Craft Pro 12mm x 19mm 1/4" Shank Router Cutter Bit
Trend C019AX1/4TC Craft Pro 12mm x 19mm 1/4" Shank Router Cutter Bit For use with Trend Hinge Jigs
C019CX8MMTC Craft Pro 8mm Shank TCT 12.0mm Two Flute Straight Router Cutter
Trend C019CX8MMTC Craft Pro 8mm Shank TCT 12.0mm Two Flute Straight Router Cutter 8mm Shank two flute straight router cutter For use with Trend STRIKE/JIG
C019X1/4TC 1/4" Shank Two Flute Cutter 12mm Diameter
Trend C019X1/4TC Two Flute Router Cutter 12mm Diameter 1/4" Shank straight router cutter - 12mm diameter two flute carbide tips. For ECL Jig
C020X1/4TC 1/4" Shank Two Flute Cutter 12.7mm Diameter
Trend C020X1/4TC Two Flute Router Cutter 12.7mm Diameter 1/4" Shank straight router cutter - 12.7mm diameter two flute carbide tips.
C021X1/4TC 1/4" Shank Two Flute Router Cutter 12.7mm Diameter
Trend C021X1/4TC Two Flute Router Cutter 12.7mm Diameter 1/4" Shank straight router cutter - 12.7mm diameter two flute carbide tips.
C022X1/4TC 1/4" Shank Two Flute Cutter 12.7mm Diameter
Trend C022X1/4TC Two Flute Router Cutter 12.7mm Diameter 1/4" Shank straight router cutter - 12.7mm diameter two flute carbide tips.
C023AX1/4TC 1/4" Shank Two Flute Cutter 14mm Diameter
Trend C023AX1/4TC Two Flute Router Cutter 14mm Diameter 1/4" Shank straight router cutter - 14mm diameter two flute carbide tips.
C024X1/4TC 1/4" Shank Two Flute Router Cutter 14.3mm Diameter
Trend C024X1/4TC Two Flute Router Cutter 14.3mm Diameter 1/4" Shank two flute router cutter
C025AX1/4TC 1/4" Shank Two Flute Router Cutter 16mm Diameter
Trend C025AX1/4TC Two Flute Router Cutter 16mm Diameter 1/4" shank straight router cutter - 16mm diameter two flute carbide tips
C030AX1/4TC 1/4" Shank Two Flute Router Cutter 20.0mm Diameter
Trend C030AX1/4TC Two Flute Router Cutter 20mm Diameter 1/4" Shank straight router cutter - 20mm diameter two flute carbide carbide tips
C030X1/4TC 1/4" Shank Two Flute Cutter 19.1mm Diameter
Trend C030X1/4TC Two Flute Router Cutter 19.1mm Diameter 1/4" Shank straight router cutter
C044X1/4TC 1/4" Shank Chamfer V Groove Cutter Angle=45 degrees
Trend C044X1/4TC 1/4" Shank Chamfer V Groove Cutter Angle=45 degrees Trend Craft Pro 1/4" shank 'V' groove cutter 12.7mm diameter Two Flute Carbide Tips
C049X1/4TC 1/4" Shank Self Guided Chamfer Angle=45 degrees x 12.7mm Cut
Trend C049X1/4TC 1/4" Shank Self Guided Chamfer Angle=45 degrees x 12.7mm Cut 32mm Diameter Two Flute Carbide Tips
C056X1/4TC 1/4" Shank Radius 9.5mm Radius x 19.1mm Diameter Router Cutter
Trend C056X1/4TC 1/4" Shank Radius 9.5mm Radius x 19.1mm Diameter Router Cutter
C074AX1/4TC 1/4" Shank Rounding Over Router Cutter 1.6mm Radius x 7.9mm Cut
Trend C074AX1/4TC 1/4" Shank Rounding Over Router Cutter 1.6mm Radius x 7.9mm Cut
C074BX1/4TC 1/4" Shank Rounding Over Router Cutter 3.0mm Radius x 9.5mm Cut
Trend C074BX1/4TC 1/4" Shank Rounding Over Router Cutter 3.0mm Radius x 9.5mm Cut
C074X1/4TC 1/4" Shank Rounding Over 3.2mm Radius x 9.5mm Cut
Trend C074X1/4TC Rounding Over 3.2mm Radius x 9.5mm Cut 1/4" shank bearing guided round over router cutter - 1/8" radius two flute carbide tips.
C074X8MMTC 8mm Shank Rounding Over Router Cutter 3.2mm Radius x 9.5mm Cut
Trend C074X8MMTC Rounding Over Router Cutter 3.2mm Radius x 9.5mm Cut 8mm Shank
C075X8MMTC 8mm Shank Rounding Over Router Cutter 4.8mm Radius x 12.7mm Cut
Trend C075X8MMTC 8mm Shank Rounding Over Router Cutter 4.8mm Radius x 12.7mm Cut
C076X1/4TC 1/4" Shank Rounding Over Router Cutter 6.3mm Radius x 12.7mm Cut
Trend C076X1/4TC 1/4" Shank Rounding Over Router Cutter 6.3mm Radius x 12.7mm Cut
C076X8MMTC 8mm Shank Rounding Over Router Cutter 6.3mm Radius x 12.7mm Cut
Trend C076X8MMTC 8mm Shank Rounding Over Router Cutter 6.3mm Radius x 12.7mm Cut
C077X8MMTC 8mm Shank Rounding Over Router Cutter 7.9mm Radius x 12.7mm Cut
Trend C077X8MMTC 8mm Shank Rounding Over Router Cutter 7.9mm Radius x 12.7mm Cut
C078X1/4TC 1/4" Shank Rounding Over Router Cutter 9.5mm Radius x 15.9mm Cut
Trend C078X1/4TC 1/4" Shank Rounding Over Router Cutter 9.5mm Radius x 15.9mm Cut
C078X8MMTC 8mm Shank Rounding Over Router Cutter 9.5mm Radius x 15.9mm Cut
Trend C078X8MMTC 8mm Shank Rounding Over Router Cutter 9.5mm Radius x 15.9mm Cut
C079AX1/2TC - Rounding Over 19mm Radius x 25mm Cut 1/2" Shank
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece.
C079X1/4TC 1/4" Shank Rounding Over Router Cutter 12.7mm Radius x 19.1mm Cut
Trend C079X1/4TC 1/4" Shank Rounding Over Router Cutter 12.7mm Radius x 19.1mm Cut
C079X8MMTC 8mm Shank Rounding Over Router Cutter 12.7mm Radius x 19.1mm Cut
Trend C079X8MMTC 8mm Shank Rounding Over Router Cutter 12.7mm Radius x 19.1mm Cut
C115AX1/4TC 1/4" Shank Self Guided Trimmer 9.5mm Diameter Router Cutter
Trend C115AX1/4TC 1/4" Shank Self Guided Trimmer 9.5mm Diameter Router Cutter
C115X1/4TC 1/4" Shank Self Guided Trimmer 9.5mm Diameter Router Cutter
Trend C115X1/4TC 1/4" Shank Self Guided Trimmer 9.5mm Diameter Router Cutter
C116X1/4TC 1/4" Shank Self Guided Trimmer 12.7mm Diameter Router Cutter
Trend C116X1/4TC 1/4" Shank Self Guided Trimmer 12.7mm Diameter Router Cutter
C117BX1/2TC 1/2" Shank Guided Trimmer 19.1mm Diameter Router Cutter
Trend C117BX1/2TC 1/2" Shank Guided Trimmer 19.1mm Diameter Router Cutter
C121BX1/4TC 1/4" Shank Template Profile Router Cutter 12.7mm Diameter
Trend C121BX1/4TC 1/4" Shank Template Profile Router Cutter 12.7mm Diameter
C121CX1/4TC 1/4" Shank Template Profile Router Cutter 15.9mm Diameter
Trend C121CX1/4TC 1/4" Shank Template Profile Router Cutter 15.9mm Diameter
C121DX1/4TC 1/4" Shank Template Profile Router Cutter 12.7mm Diameter
Trend C121DX1/4TC 1/4" Shank Template Profile Router Cutter 12.7mm Diameter
C138X1/4TC 1/4" Shank Self Guided Chamfer Router Cutter 60 Degrees x 12.7mm Cut
Trend C138X1/4TC 1/4" Shank Self Guided Chamfer Router Cutter 60 Degrees x 12.7mm Cut
C152X1/2TC 1/2" Shank Biscuit Jointer Set Router Cutter
Trend C152X1/2TC 1/2" Shank Biscuit Jointer Set Router Cutter Bearing guided biscuit cutter - 37.2mm diameter
C152X1/4TC 1/4" Shank Biscuit Jointer Set Router Cutter
Trend C152X1/4TC 1/4" Shank Biscuit Jointer Set Router Cutter Bearing guided biscuit cutter - 37.2mm diameter
C153DX1/2TC 1/2" Shank Two Flute Router Cutter 12.7mm Diameter
Trend C153DX1/2TC 1/2" Shank Two Flute Router Cutter 12.7mm Diameter
C153MX1/2TC 1/2" Shank Two Flute Router Cutter 12.7mm Diameter
Trend C153MX1/2TC 1/2" Two Flute Router Cutter 12.7mm Diameter Two fluted solid carbide insert straight cutters
C153X1/2TC 1/2" Shank Two Flute Router Cutter 12.7mm Diameter
Trend C153X1/2TC 1/2" Shank Two Flute Router Cutter 12.7mm Diameter
C167X1/4TC 1/4" Shank Guided Trimmer Router Cutter 6.35mm Diameter x 12.7mm
Trend C167X1/4TC 1/4" Shank Guided Trimmer Router Cutter 6.35mm Diameter x 12.7mm Bearing guided flush trimming cutter - 6.3mm two flute carbide tips
Trend C205X1/4TC 1/4" Shank Bearing Guided Three Flute Trimmer Router Cutter 12.7mm Diameter 25mm Length
D/STAND/A Door Holder Stand 32mm to 55mm Thick Doors
Holds the door on the edge while routing a hinge recess and mortice for locks. Adjustable for doors 32-55mm thick. Non scratch base. Allows the door to be tilted back to assist fitting into the frame. Max door weight 58kg.
Fine Adjuster For Guide Stop FE-FS OF1010 488754
488754 OF900, OF1000, OF1010 Easy to read scale easy readjustment when used with guide rail 1 graduation mark is 1/10mm 1 rotation corresponds to 1mm
H/JIG/D6 AnyDoor 6’8” Modular Hinge Jig
Trend H/JIG/D6 AnyDoor 6’8” Modular Hinge Jig Modular rail construction allows the jig to be shortened or extended to suit smaller or oversize doors. Ideal for Dutch/stable doors, loft conversions, access panels, loft hatches and understairs storage. Expansion rails available for doors larger than 2040mm (6'8") Patented* Twin-Rail system provides unlimited hinger positions within the rail, making the jig perfect for both new and replacement installations. Radius hinge compatibility allows fast and accurate installation of square or 10mm radius hinge profiles Bradawl or Screw attachment options enables the jig the be secured with either bradawls for speed (included) or 3.5mm (no.6) woodscrews for maximum stability Tough carry bag stores pre-built jig sections to minimise assembly time Lightweight anodized aluminium rails for optimum strength, durability, accuracy and a smooth router running surface Adjustable edge guides accommodate 19mm, 26mm and 30mm hinge leaf widths (preset) or any leaf width between 12.7mm and 35mm (custom) Adjustable Quick-Release aperture blocks features Trend's tool-free, patented* thumb-turn locking mechanism for fast, accurate hinge positioning 3.0mm (1/8") Steel End Plate ensures consistent head clearance and provides rapid door-to-frame transition 25mm (1") Rail depth allows jig to be used against fixed door stops Includes: 16.0mm guide bush Requires: 12.0mm long-reach Router Cutter and 1/4"/8mm plunge router.
Hole Drilling Set LR32 Set 583290 For OF1010 OF1400 Routers
583290- guide plate, centering mandrel, 2 x longitudinal stop, 2 parallel side fences with adjustable stop For use with the of1010 and of1400 routers holes drilled with a 32mm space series and a 3 or 5mm hole diameter
KWJ900 Kitchen Worktop Jig 900mm
Fixed lengths for 400mm, 500mm, 550mm, 600mm, 616mm, 650mm, 700mm and 900mm wide worktops. Cuts up to 40mm thick worktops with or without anti-drip postformed edge. 10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up. Hard wearing solid laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up. Left hand and right hand corners, 400mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps.
KWJ950/PRO 950mm Kitchen Worktop Jig Multi Material
KWJ950/PRO 1260mm length 340mm width 12mm thickness 7.4kg 3/10/35mm back sets 600,610,616,620,635,700,900,950mm 4 bolt recess, bolt recess centre 175mm 40/100mm corner radius
LR32-SYS Hole Drilling Set 576799 OF1010 OF1400
576799 For use with the of1010, of1400, of900 routers ideal for preparing hole series with a 32mm spacing drilling of fittings like cupboard hinges
MFK700 Accessory Set ZS-MFK 700 578375
578375- contains router table, contact pad, followers roll touch pad with feeler spring, edge trimming cutter parallel side fence, dust extraction attachment, hex key systainer sys3 m137 perfect for edge routing jobs or protruding edges in wood and plastic. rounding and chamfering edges
OF1010 Guide Rail Adapter 488752
488752 Guide rail adapter to suit of1000 of1010 routers
OF1010 Router Accessory Set ZS-OF1010 578046
578046 kit to suit the of1010 router copying ring 17,24,27,30.40 guide rail adaptor chip deflector. extraction hood, supplied in a systainer
PBR01X1/2TC 1/2" TCT Two Flute Straight Worktop Router Cutter 12.7mm x 50mm
Trend PBR01X1/2TC 1/2" TCT Two Flute Straight Worktop Router Cutter 12.7mm x 50mm
PH/JIG Pocket Hole Jig Dual Column
Material thickness min. 16 mm Material thickness max. 38 mm Material width min. 38 mm Hole pitch 29 mm-63 mm Drill diameter 9.5 mm Square drive bit size No.2 Screw sizes No.7 x 30 mm 100 x Dome head screws 1 x Face clamp 1 x HSS drill bit with collar 1 x 75mm Square drive bit 1 x 150mm Square drive bit 1 x Hex key 4mm A/F 1 x Hex key 2.5mm A/F
SET/SS24X1/4TC 24 Piece Router Cutter Set 1/4" Shank
24 piece router cutter set. 1/4" shank. For softwood, plywood, MDF and hardwood. Excellent value for money. Plastic case included. Includes 7 self guided cutters for straight and shaped work.
SET/SS31X1/4TC 30 Piece Router Cutter Set 1/4" Shank
This thirty-piece cutter set contains a range of popular Tungsten Carbide Tipped cutters for a variety of applications. 1/4-inch shank diameter. For softwood, hardwood, chipboard, plywood and MDF. Excellent value for money. Set includes fifteen guided and fifteen unguided router cutters. Supplied in aluminium carry case.
SET/SS50X1/4TC 1/4 Inch Shank 50 Piece Router Cutter Starter Set
1/4-inch shank diameter. For softwood, hardwood, chipboard, plywood and MDF. Excellent value for money. Set includes twenty two guided, ten straights and eighteeen unguided router cutters. This kit allows you to do 150 different profiles for a variety of applications 50 cutters, 150 applications. Supplied in aluminium carry case.
SET/SS9X1/2TC 15 Piece 1/2" Shank Router Cutter Set
1/2" shank. 15 piece router cutter set. For hardwood, softwood, plywood and MDF. Includes 8 self guided cutters for straight and shaped work.
STRIKE/JIG Professional Strike & Keep Jig
STRIKE/JIG ideal for strike, keep and latch plates fully adjustable for tubular locks, sash locks dead locks and 2,3 and 5 lever mortice locks
TRENDIWAX Wax Lubricant Stick 342g
Apply directly onto the teeth of the stationary blade. To extend the life of the sawblade by keeping th blade cool at cutting points. For use when sawing aluminium.
Vari-Jig Adjustable Frame System
Adjustable frame for rectangles or squares. Allows a router to cut recesses, slots and face panel moulds. Four lengths of 700mm extrusion with dual metric/imperial measuring scales. Can be used to create panel doors for kitchens. Working area 600 x 600mm and cross cut accuracy to 0.1mm. Use with a guide bush with minimum 8mm spigot length or use unibase as a guide.