HMT VersaDrive TurboTip Impacta Step Cutters

HMT VersaDrive TurboTip Impacta Step Cutters 506040-0160 8-16mm - Step Diameters 8, 10, 12, 14 and 16mm. Step Depth 12mm. 11mm VersaDrive Shank. Total Length 112mm. 506040-0220 14-22mm - Step Diameters 14, 16, 18, 20 and 22mm. Step Depth 12mm. 11mm VersaDrive Shank. Total Length 115mm. 506040-0320 24-32mm - Step Diameters 24, 26, 28, 30 and 32mm. Step Depth 12mm. 11mm VersaDrive Shank. Total Length 123mm. 5 heavy duty drill bits in one tool Drill new & enlarge existing holes in metal up to 12mm thick Safety collar prevents injury & damage when using the largest step Upgraded spiral-flute design for increased performance and swarf clearance Heavy-duty hex shank design for secure non-slip operation Industrial grade Titanium Nitride coating reduces heat buildup and burn-out Impact-rated due to dual hardening process - allows up to 15X faster speed than traditional methods Use on Impact to prevent dangerous kickback

HMT Turbo Drilling Kit + V18-900 Impact Wrench

HMT Turbo Drilling Kit + V18-900 Impact Wrench Turbo Drill Kit includes; 4 x VersaDrive TurboTip Impact Drill Bits 6, 8, 10 & 12mm 3 x VersaDrive TurboTip Cone Cutters 20, 25 & 32mm 3 x VersaDrive TurboTip ImpactaStep Cutters 8-16mm, 14-22mm & 18-26mm 1 x VersaDrive Rapid-Lock 1/2" Impact Wrench Adapter 1 x VersaDrive STAKIT Half Top Case

HMT Turbo Impact Starter Kit + V18-900 Impact Wrench

HMT Turbo Impact Starter Kit + V18-900 Impact Wrench Start Kit includes; 4 x VersaDrive TurboTip Impact Drill Bits 6.8, 8.5, 10.5 & 14mm 4 x VersaDrive ImpactaTaps M8, M10, M12 & M16 3 x VersaDrive TurboTip ImpactaStep Cutters 8-16mm, 14-22mm & 18-26mm 1 x VersaDrive Rapid-Lock 1/2" Impact Wrench Adapter 1 x VersaDrive 130mm Extension Arbor 1 x VersaDrive STAKIT Half Top Case

HMT 506040-SET1 VersaDrive TurboTip ImpactaStep Cutters

HMT 506040-SET1 VersaDrive TurboTip ImpactaStep Cutters 3pc set STAKIT Small InsertFoam set, compatible with STAKIT ETOP2 and ETOP4 Top Cases (available separately) 16, 22 & 26mm TurboTip ConeCutters Step Depth 12mm 11mm VersaDrive® hex shank • 5 heavy duty drill bits in one tool • Drill new & enlarge existing holes in metal up to 12mm thick • Safety collar prevents injury & damage when using the largest step • Upgraded spiral-flute design for increased performance and swarf clearance • Heavy-duty hex shank design for secure non-slip operation • Industrial grade Titanium Nitride coating reduces heat buildup and burn-out • Impact-rated due to dual hardening process - allows up to 15X faster speed than traditional methods • Use on Impact to prevent dangerous kickback

HMT 505050-SET1 VersaDrive TurboTip ConeCutter

HMT 505050-SET1 VersaDrive TurboTip ConeCutter Includes; 505050-0200  505050-0250 505050-0320 Safety Collar prevents injury & damage Spiral flute design Industrial grade Titanium Nitride coating reduces heat buildup and burn-out Use on Impact to prevent dangerous kickback caused by handheld rotary tools Heavy-duty hex shank design for secure non-slip operation Quality results on stainless steels and Inox - rotary application recommended VersaDrive patented shank and modular adapters provide unbeatable jobsite flexibility Impact-rated due to dual hardening process - allows up to 15 X faster speed than traditional methods  

HMT 308050-0040 VersaDrive ImpactaTap 1/2" - 13 UNC

15X Faster than Hand Tapping VersaDrive® ImpactaTaps are the first range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand. With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating

HMT MA24-ETOP2-DRILL STAKIT ETOP2 Versadrive Impact Drilling Kit

HMT MA24-ETOP2-DRILL ETOP2 Impact Drilling Kit Contains;  x VersaDrive TurboTip Impact Drill Bits (6, 8, 10 and 12mm)  x VersaDrive turbotip Step Drills (20, 25 and 32mm) 2 x VersaDrive turbotip impacta step cutters 8-16, 14-22, 18-26mm 1 x VersaDrive Rapid-Lock 1/2" Impact Wrench Adapter 1 x STAKIT ETOP2 Half Top Case

HMT VersaDrive ImpactaTap M18 x 2.5mm

m18 x 2.50 Hex shank suitable for drills up to 10mm tap size can be driven by impact wrenches and mag drills. Adapters shown in images are sold separately       

HMT 209015-SET16 Stakit ETOP2 Turbotip Impact Drill Bit

HMT JM24-209015-SET16 16 Piece TurboTip Impact Drill Bit Set Includes 6, 6.8, 7, 8, 8.5, 9, 10, 1.5, 11, 12, 13, 14, 16, 18 and 22mm Supplied in a STAKIT ETOP2 half top case.

HMT 601036-0320 32mm ULTRA Coated Weldon Shank TCT Countersink - 90°

HMT 601036-0320 32mm ULTRA Coated Weldon Shank TCT Countersink - 90° 32mm Max Diameter 72mm Total Length 19.05mm (3/4") Weldon shank to fit all standard magnet drills

HMT 101035 VersaDrive TCT HoleCutter Extra Long 100mm Deep

Fit all drill chucks. 10x longer than the standard cutters. Impact rated. Quick change system with versadrive adaptors. 120mm reach with 100mm depth of cut. Tungsten carbide teeth. Use in standard 1/2" drill chuck or use with magnet drill adapter.

HMT 501030-0210 21mm Impact Power Tool Reamer VersaDrive

501030-0210 21mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills  

HMT 2040EX-SET1 Versadrive HD Impact Stud Extractors M6-M20 8 Piece

HMT 2040EX-SET1 Versadrive HD Impact Stud Extractors M6-20 8 Piece

HMT 2040EX-SET2 Versadrive HD Impact Stud Extractors M5-M26 12 Piece

HMT 2040EX-SET2 Versadrive HD Impact Stud Extractors M5-26 Includes VersaDrive 1/2" Impact Wrench Adapter and VersaDrive Magnet Drill Adapter 12 Piece

HMT VersaDrive 130mm Rapid-Lock Extension Arbor

130mm Extension arbor for rotary drills. Extends the working reach of all VersaDrive tools Rapid-Lock. Single handed loading action and can also be used in combination with other VersaDrive adapters. Hex shank for non-slip use in any drill chuck. Improved Quick Release collar that prevents accidental tool release caused by vibrations or contact with the workpiece.

HMT 505030-0030 VersaDrive Impact Step Drill Bit 1/4-1 3/8" (1/8"Increments)

Featuring a spiral flute design with self-starting drill tip for fast, smooth drilling with a rotary drill or impact wrench. Hex shank suitable for use in any standard 1/2” drill chuck for cordless or Pistol Drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. Suitable for stainless and harder materials if used at low RPM. Use appropriate lubrication and correct RPM to achieve long tool life. Specially hardened for use with Impact tools. Precision ground flutes with easy chip clearance.

HMT 14mm VersaDrive Blacksmith Cobalt Drill Bit

209010-0140 14mm any standard 1/2" drill chuck for cordless or pistol drill use 135 Split Point for easy starting and high accuracy 8% Cobalt for long life and endurance in structural steel and hard metals GoldMax Low Friction Titanium Coating to stop heat burn out    

HMT STC-ETOP4-IMPACT VersaDrive STAKIT ETOP4 Impact Kit

HMTSTC-ETOP4-IMPACT Contains; 4 x VersaDrive TurboTip Impact Drill Bits; 6.8mm 8.5, 10.5, & 14mm4 x VersaDrive ImpactaTaps; M8, M10, M12 & M163 X VersaDrive Impact Reamers; 14, 18 & 22mm3 x VersaDrive ImpactaStep Cutters; 8-16mm 14-22mm & 18-26mm 3 x step drill bits 4-12mm, 4-22mm & 4-30mm 1 x VersaDrive Rapid-Lock 1/2" Impact Wrench Adapter 1 x VersaDrive STAKIT Full Top Case1 x Small 8pc Insert Foams1 x Large 6pc Insert Foam3 x Adater Foam Inserts

HMT STC-ETOP2-IMPACT VersaDrive STAKIT ETOP2 Impact Kit

HMTSTC-ETOP2-IMPACT15 Piece Impact Kit Contains; 4 x VersaDrive TurboTip Impact Drill Bit Bits; 6.8, 8.5, 10.5 & 14mm4 x VersaDrive ImpactaTaps; M8, M10, M12 & M163 x VersaDrive ImpactaStep Cutters; 8-16mm, 14-22mm & 18-26mm 1 x VersaDrive Rapid-Lock 1/2" Impact Wrench Adapter 1 x VersaDrive 130mm Extension Arbor1 x VersaDrive STAKIT Half Top Case

HMT 501030-0240 24mm Impact Power Tool Reamer VersaDrive

501030-0240 24mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.  

HMT VSD-TMKIT VersaDrive Tradesman's Kit

HMT Versadrive Tradesman's KitVSD-TMKITIncludes;   VersaDrive Step Drill 4-12mmVersaDrive Step Drill 4-22mm VersaDrive TCT Holecutter 20mmVersaDrive TCT Holecutter 25mmVersaDrive TCT Holecutter 32mmVersadrive ImpactaStep Cutter 8-16mmVersadrive 1/4" Rapid-Lock Impact Driver AdapterVersadrive 130mm Rapid-Lock Extension Arbor

HMT 501020-0360 36 x 200mm Impactamag Impact Reamer

501020-0360 36mm x 200mm impact reamer Ideal for steel erection & bridge workUsed for Network Rail bridge refurbishment and strengtheningIdeal for modifying & enlarging holesSecured directly to the Impact WrenchCan be used with any standard Magnet DrillUnique 6 flute design for faster, smoother cutPrepare holes ready for installation of TCB & friction grip bolts

HMT STC-EMID-MEIK STAKIT 31 Piece Site Installation Kit

HMT  STC-EMID-MEIK 31 Piece STAKIT Site Installation Kit - Metric Contains; 6 x Turbo 6, 6.35, 8, 10.5, 12 & 14mm 5 x HoleCutters 14, 17, 18, 20 & 22mm  2 x ImpactaStep 16 & 22mm 3 x DrillTaps M6, M8 & M10 3 x ImpactTaps M12, M16 & M20 4 x Reamers 12, 14, 18 & 22mm 1/4" Impact Driver Adapter 1/2" Impact Wrench Adapter Magnet Drill Adapter 130mm Extension 300mm Extension Supplied in STAKIT case.

HMT Drill Bit Set 209015-SET3 VersaDrive TurboTip Impact Bit Set 6.8, 8, 8.5, 10, 10.5, 12, 14mm

209015-SET3 6.8, 8, 8.5, 10, 10.5, 12, and 14mm bits in box Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately. 

HMT STC-TOP-VCM01 VersaDrive STAKIT Top Toolcase - Rotary Kit

HMT VersaDrive STAKIT Top Toolcase Rotary Kit STC-TOP-VCM01 Kit Includes; 108030 CarbideMax Broach Cutters 12, 14, 18, 22, 26mm4 Pilot Pins101030 VersaDrive HoleCutters 14, 16, 18, 20, 22, 26mm

HMT 6x16mm GoldMax TCT Burr Ball Nosed Cylinder

Provides a precision cut, long life and high control. Titanium coating for a long life. Recommended for use with high speed die grinders and straight grinders. 6x16mm ball nose burr. 60mm length. standard 6mm shank

HMT 402010-0060 6 x 6mm GoldMax TCT Ball Burr

Provides a precision cut, long life and high control. Titanium coating for a long life. Recommended for use with high speed die grinders and straight grinders. 6 x 6mm tct burr. 50mm length. standard 6mm shank. 

HMT 402010-0120 12 x 10mm GoldMax TCT Ball Burr 6mm Shank

Provides a precision cut, long life and high control. Titanium coating for a long life. Recommended for use with high speed die grinders and straight grinders. 12 x 10mm tct burr. 55mm length. standard 6mm shank

HMT 12x25mm GoldMax TCT Tree Burr

Provides a precision cut, long life and high control. Titanium coating for a long life. Recommended for use with high speed die grinders and straight grinders. 12x25 tree burr. 69mm length. standard 6mm shank

HMT 209015-0200 20mm VersaDrive TurboTip Impact Drill Bit

20mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT VersaDrive Countersinks

Recommended for use with rotary drills, mag drills and pillar drills. Features fully grounded flutes and a titanium coating to help reduce wear and blunting.  Patented non slip hex shank fur use in any standard 1/2” drill chuck. Adapters available to use in mag drill 111035-01, versadrive impact adapters 111026-014A and 111130-012A, sds+ adapter 112010-01 extension 300mm 111010-0002. Optimum life and performance when used with rotary pistol drills or drill presses. Up to 16.5mm can be used with impact wrench and impact drivers. Can be used on stainless steel at reduced RPM.

HMT M24 x 3.0mm VersaDrive ImpactaTap Metric Coarse Thread

m24 x 3.0mm  Hex shank suitable for drills up to 10mm tap size can be driven by impact wrenches and mag drills Adapters shown in images are sold separately 

HMT Countersink Drill Bit Set, 12.4, 16.5, 20.5, 25, 31mm 603060-5SET

Recommended for use with rotary drills, mag drills and pillar drills. Features fully grounded flutes and a titanium coating to help reduce wear and blunting.  Patented non slip hex shank fur use in any standard 1/2” drill chuck. Adapters available to use in mag drill 111035-01, versadrive impact adapters 111026-014A and 111130-012A, sds+ adapter 112010-01 extension 300mm 111010-0002. Optimum life and performance when used with rotary pistol drills or drill presses. Up to 16.5mm can be used with impact wrench and impact drivers. Can be used on stainless steel at reduced RPM.

HMT 501030-0080 8mm Impact Power Tool Reamer VersaDrive

8mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT 209015-0160 16mm VersaDrive TurboTip Impact Drill Bit

16mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT GoldMax HSS Weldon Countersink 90 Degrees

Available in 30, &0 and 55mm. Specially coated for increased tool life. 19.05mm weldon shank for use with all standard mag drills.

HMT 209015-SET4 VersaDrive TurboTip Impact Drill Bit Set 6, 8, 10, 12, 14, 18 & 22mm

Contains 6,8,10,12,14,18 and 22mm. Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 209015-0180 18mm VersaDrive TurboTip Impact Drill Bit

18mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 501030-SET VersaDrive Impact Reamer Set, 12, 14, 18, 22, 26mm

Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Supplied in plastic case Contains the following sizes 12-14-18-22-26mm. Adapters shown in images are sold separately.

HMT CarbideMax 55 Broach Cutter Pilot Pin 6.34x103mm

CarbideMax 55 Broach Cutter Pilot Pin 6.34x103mm Pack of 2 For 12-17mm carbide max 55 cutters

HMT M20 x 2.50 VersaDrive ImpactaTap Metric Coarse Thread

m20 x 2.50 Hex shank suitable for drills up to 10mm tap size can be driven by impact wrenches and mag drills. Adapters shown in images are sold separately   

HMT 308010-0300 M30 x 3.50mm VersaDrive ImpactaTap Metric Coarse Thread

m30 x3.50mm Hex shank suitable for drills up to 10mm tap size can be driven by impact wrenches and mag drills, Adapters shown in images are sold separately.

HMT 301125-SET1 VersaDrive Combination Drill-Tap Set 5 Piece M5 M6 M8 M10 M12

301125-SET1 5 Piece set M5, M6, M8, M10, M12 Ground flute twist drill creates the perfect tapping hole Safer tapping with minimal kickback GoldMax low-friction titanium coating to stop heat burn out High-strength, non-slip shank design

HMT 505020-SET1 VersaDrive Step Drill Bit Set 3 Piece 12mm 20mm 30mm

505020-SET1 12mm, 20mm & 30mm VersaDrive 5mm drilling capacity 135° split point angle for easy starting and high accuracy Hardened for impact wrench use 8% cobalt for long life and endurance in structural steel and hard metals  

HMT 501030-0260 26mm Impact Power Tool Reamer VersaDrive

501030-0260 26mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT 505020-0120 4-12mm VersaDrive Impact Step Drill Bit

505020-0120 4-12mm step drill bit 5mm thick drilling capacity ground flutes with easy chip clearance 135° split point angle for easy starting & accuracy Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills. Adaptors shown in images are sold separately.

HMT 505020-0220 4-22mm VersaDrive Impact Step Drill Bit

505020-0220 4-22mm step drill bit 5mm thick drilling capacity ground flutes with easy chip clearance 135° split point angle for easy starting & accuracy Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills. Adaptors shown in photos are not included

HMT 505020-0300 4-30mm VersaDrive Impact Step Drill Bit

505020-0300 4-30mm step drill bit 5mm thick drilling capacity ground flutes with easy chip clearance 135° split point angle for easy starting & accuracy Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills. Adaptors shown in images are sold separately.

HMT 505020-0400 6-40mm VersaDrive Impact Step Drill Bit

505020-0400 6-40mm step drill bit 5mm thick drilling capacity ground flutes with easy chip clearance 135° split point angle for easy starting & accuracy Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills.

HMT 10mm Versadrive Impact Power Tool Reamer 501030-0100

501030-0100 10mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT 12mm VersaDrive Impact Power Tool Reamer 501030-0120

501030-0120 12mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT 14mm Impact Power Tool Reamer VersaDrive 501030-0140

501030-0140 14mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT 501030-0200 20mm Impact Power Tool Reamer VersaDrive

501030-0200 20mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT 501030-0160 16mm Impact Power Tool Reamer VersaDrive

501030-0160 16mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adapters shown in images are sold separately.

HMT 501030-0180 18mm Impact Power Tool Reamer VersaDrive

501030-0180 18mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT 501030-0220 22mm Impact Power Tool Reamer VersaDrive

501030-0220 22mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT 308010-SET1 VersaDrive ImpactaTap 5 Piece Tap Set M6 M8 M10 M12 M16

308010-SET1 m6. m8, m10, m12, m16 Hex shank suitable for drills upto 10mm tap size can be driven by impact wrenches and impact drivers

HMT M10 x 1.5mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0100 m10 x 1.5mm Hex shank suitable for drills upto 10mm tap size can be driven by impact wrenches and impact drivers Adapters shown in images are sold separately 

HMT M12 x 1.75mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0120 m12 x 1.75mm Hex shank suitable for drills upto 10mm tap size can be driven by impact wrenches and impact drivers, Adapters shown in images are sold separately 

HMT M14 x 2.0mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0140 m14 x 2.0mm Hex shank suitable for drills upto 10mm tap size can be driven by impact wrenches and impact drivers, Adapters shown in images are sold separately 

HMT M16 x 2.0mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0160 m16 x 2.0mm Hex shank suitable for drills upto 10mm tap size can be driven by impact wrenches and impact drivers Adapters shown in images are sold separately 

HMT M6 X 1 VersaDrive Spiral Flute Combi Drill-Tap

301125-0060 m6 x 1 Fast Tapping with Minimal Kickback High-Grade Tool Steel for high accuracy & long life Ground Flute Twist Drill Creates the perfect Tapping Hole High Strength, Non-slip shank design Correct RPM is critical for good performance on larger drill taps For impact wrench use, pilot drilling the hole with a separate drill bit is necessary

HMT M8 x 1.25 VersaDrive Spiral Flute Combi Drill-Tap

301125-0080 m8 x 1.25 Fast Tapping with Minimal Kickback High-Grade Tool Steel for high accuracy & long life Ground Flute Twist Drill Creates the perfect Tapping Hole High Strength, Non-slip shank design Correct RPM is critical for good performance on larger drill taps For impact wrench use, pilot drilling the hole with a separate drill bit is necessary

HMT M10 X 1.50 VersaDrive Spiral Flute Combi Drill-Tap

301125-0100 m10 x 1.50 Fast Tapping with Minimal Kickback High-Grade Tool Steel for high accuracy & long life Ground Flute Twist Drill Creates the perfect Tapping Hole High Strength, Non-slip shank design Correct RPM is critical for good performance on larger drill taps For impact wrench use, pilot drilling the hole with a separate drill bit is necessary

HMT M12 x 1.75 VersaDrive Spiral Flute Combi Drill-Tap

301125-0120 m12 x 1.75 Fast Tapping with Minimal Kickback High-Grade Tool Steel for high accuracy & long life Ground Flute Twist Drill Creates the perfect Tapping Hole High Strength, Non-slip shank design Correct RPM is critical for good performance on larger drill taps For impact wrench use, pilot drilling the hole with a separate drill bit is necessary

HMT M5 x 0.8mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0050 m5 x 0.8mm Hex shank suitable for drills up to 10mm tap size can be driven by impact wrenches and impact drivers,  Adapters shown in images are sold separately 

HMT M6 x 1.0mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0060 m6 x 1.0mm Hex shank suitable for drills up to 10mm tap size can be driven by impact wrenches and impact drivers Adapters shown in images are sold separately 

HMT M8 x 1.25mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0080 m8 x 1.25mm Hex shank suitable for drills upto 10mm tap size can be driven by impact wrenches and impact drivers Adapters shown in images are sold separately 

HMT 209015-0110 11mm VersaDrive TurboTip Impact Drill Bit

209015-0110 11mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 209015-0120 12mm VersaDrive TurboTip Impact Drill Bit

209015-0120 12mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Adapters shown in images are sold separately.

HMT 209015-0140 14mm VersaDrive TurboTip Impact Drill Bit

209015-0140 14mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately

HMT 209015-SET1 VersaDrive TurboTip Impact Drill Bit Set 6, 8, 10, 12mm

209015-SET1 6, 8, 10, and 12mm bits in box Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life

HMT M3 X 0.50 VersaDrive Spiral Flute Metal Combi Drill-Tap

301125-0030 m3 x 0.50 Fast Tapping with Minimal Kickback High-Grade Tool Steel for high accuracy & long life Ground Flute Twist Drill Creates the perfect Tapping Hole High Strength, Non-slip shank design Correct RPM is critical for good performance on larger drill taps For impact wrench use, pilot drilling the hole with a separate drill bit is necessary  

HMT M4 X 0.70 VersaDrive Spiral Flute Combi Drill-Tap

301125-0040 m4 x 0.70 Fast Tapping with Minimal Kickback High-Grade Tool Steel for high accuracy & long life Ground Flute Twist Drill Creates the perfect Tapping Hole High Strength, Non-slip shank design Correct RPM is critical for good performance on larger drill taps For impact wrench use, pilot drilling the hole with a separate drill bit is necessary

HMT M5 X 0.80 VersaDrive Spiral Flute Combi Drill-Tap

301125-0050 m5 x 0.80 Fast Tapping with Minimal Kickback High-Grade Tool Steel for high accuracy & long life Ground Flute Twist Drill Creates the perfect Tapping Hole High Strength, Non-slip shank design Correct RPM is critical for good performance on larger drill taps For impact wrench use, pilot drilling the hole with a separate drill bit is necessary

HMT 209015-0060 6mm VersaDrive TurboTip Impact Drill Bit

209015-0060 6mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 209015-0068 6.8mm VersaDrive TurboTip Impact Drill Bit

209015-0068 6.8mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life

HMT 209015-0070 7.0mm VersaDrive TurboTip Impact Drill Bit

209015-0070 7.00mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 209015-0080 8.0mm VersaDrive TurboTip Impact Drill Bit

209015-0080 8mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 209015-0085 8.5mm VersaDrive TurboTip Impact Drill Bit

209015-0085 8.5mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 209015-0090 9.0mm VersaDrive TurboTip Impact Drill Bit

209015-0090 9mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 209015-0100 10mm VersaDrive TurboTip Impact Drill Bit

209015-0100 10mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 209015-0105 10.5mm VersaDrive TurboTip Impact Drill Bit

209015-0105 10.5mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Adapters shown in images are sold separately.

HMT 103011-0001 Magnetic Swarf Lifter

103011-0001 swarf lifter 400mm length