Trend PH/JIG/BK 3 In 1 Pocket Hole Jig

PH/JIG/BK 12.7-38mm min/max thickness 28 to 50mm hole pitch 15 degree drilling angle fine no7 x 30mmscrew size

Trend BS/JIG/PRO Belfast Sink Jig

BS/JIG/PRO 595mm length 588mm width 12mm thickness 3.9kg weight fully adjustable from 340 to 500mm deep bridging pin system for oversized sinks single guide bush design

Trend LOCK/JIG/C Professional Lock Jig

LOCK/JIG/C adjustable from 34-58mm 20 interchangeable templates quick release clamps with non marring pads.

Trend KWJ700/PRO 700mm Professional Kitchen Worktop Jig Multi Material

KWJ700/PRO 1010mm length 340mm width 12mm thickness 3/10/35mm insets backsets 600/610/616/620/635/700mm 3 bolt recesses,  40/100mm corner radius

Trend I/WEDGE/2PK Inflatable Wedge 2 Pack

Pack of 2. Can support up to 135kg. Can slide into gaps as small as 2mm. Can be expanded up to 50mm. Safety valve allows controlled release of air. Can be inflated by either hand or foot.

Trend PH/JIG/AK Pro Pocket Hole Jig Kit

PH/JIG/AK 12.7/38mm min / max material thickness 30mm hole pitch 9.5mm drill diameter no2 square drive bit size 30mm id dust spout 15 degrees drilling angle    

Trend KWJ700 Kitchen Worktop Jig 700mm

Hard wearing CNC machined Compact Grade High Pressure Laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up. Left hand and right hand corners, 400mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps. Fixed lengths for 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 635mm. 650mm and 700mm wide worktops. Cuts up to 40mm thick worktops with or without anti-drip postformed edge. Three open-ended bolt recesses (dog bone style) for 150mm bolts. Engraved lines for short 65mm bolts and worktop cross-cut. 10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up. Engraved markings for identification of pin holes.

Trend DAR/200 Digital Angle Rule 7" Long

Digital display for angles. 7" long. Metric and imperial scale. Auto shut off in 6 minutes of LCD. Rule locking function. Measuring range for 000.0 - 360.0 degrees with accuracy of 0.3 degrees.

Trend DLB Digital Level Box

Used to find the angle on a surface accurately. Used on table and mitre saws, LCD backlight for ease of reading. Accuracy of +/-0.2 degrees. Magnetic base. Includes AAA battery.

Trend E/SCRIBE EasyScribe Multi-Purpose Scribing Tool

Scribing in a door to a frame, scribing worktops, marking architrave offset, marking hinge recess depths. Marking out flooring, worktops and tiles. Marks a narrow pencil line 0.7mm wide. Thumbwheel to allow 1.40mm. 3 x spare graphites supplied.