Trend DAR/200 Digital Angle Rule 7" Long

Digital display for angles. 7" long. Metric and imperial scale. Auto shut off in 6 minutes of LCD. Rule locking function. Measuring range for 000.0 - 360.0 degrees with accuracy of 0.3 degrees.

Trend DLB Digital Level Box

Used to find the angle on a surface accurately. Used on table and mitre saws, LCD backlight for ease of reading. Accuracy of +/-0.2 degrees. Magnetic base. Includes AAA battery.

Trend E/SCRIBE EasyScribe Multi-Purpose Scribing Tool

Scribing in a door to a frame, scribing worktops, marking architrave offset, marking hinge recess depths. Marking out flooring, worktops and tiles. Marks a narrow pencil line 0.7mm wide. Thumbwheel to allow 1.40mm. 3 x spare graphites supplied.

Bulldog 5TM2AM Taper Mouth Contractors Shovel All Metal Garden Shovel No2 Head

Solid forged head All metal shaft will not rot No.2 Head/MYD handle Dimensions (L) 315mm (W) 250mm  

Timco Resin 410ML Multi-Fix Chemical Resin Vinylester

VESF410 multi fix resin 410ML Tube Vinylester Styrene Free

Timco RESINGUN 410ML Professional Resin Gun

resin gun 410ml Chemical Resin Tool 64mm heavy duty co-axial resin applicator 984g  

Timco Resin Chemical Anchor Resin 300ML Multi-Fix Styrene Free Resin

PESF310 300ML tube Polyester Styrene Free  

Timco M10 Multi Fix Concrete Bolt Hex Head in Bags

m10x 60 bag of 18 m10 x 75 bag of 14 m10 x 100 bag of 12 m10 x 150 bag of 8 drill hole 10mm fixture clearance hole 12mm a/f 17mm For concrete, brick, stone, wood and concrete block. high low parallel thread  

Timco M8 Multi Fix Concrete Bolt Hex Head Excalibur Bolts in Bags

m8 x 60 bag of 30 m8 x 75 bag of 26 m8 x 100 bag of 20 drill hole 8mm fixture clearance hole 10mm a/f 13mm For concrete, brick, stone, wood and concrete block. high low parallel thread

Timco 7.5mm Multi Fix Concrete Screws Box of 100 Zinc Yellow Finish

7.5mm diameter 6mm drill hole t30 driver bit zinc yellow finish box 100

Timco 8 x 60 Hex Head Coach Screw BZP Bag 65

m8 x 60 coach screw bag 65 bzp finish coarse thread sharp point

Beta Tools 1750R/1 Spare Flexible Hose

Nylon hose. Flexible hose. For use with 1750 Grease guns. 310mm long.

Beta Tools 1701NE Electricians Chisels 13mm Width Tip

13mm wide tip. Electricians chisels. 200mm or 250mm long.  

Beta Tools 1700N.PM/300mm Masonry Points With Hand Guard

300mm long. Chisel. Hand guards fitted.

Beta Tools 1701N Masonry Chisels 23mm Width Tip

Masonry chisels. 23mm wide tip. Either 250mm or 300mm long.

Beta Tools 1700N Masonry Points 250mm or 300mm Long

Masonry points. 250mm or 300mm long. 1700N.

Beta Tools 1725CR Mini Hacksaw Frame

250mm long. 150mm blade length. Mini hacksaw frame.

Beta Tools 1390NR Spare Faces For Item 1390N

Spare faces for 1390N. Nylon face. Different diameters available.

Beta Tools 965 Pry Bar With Flat Curved Ends

Fitted with a handle. Flat curved ends. 300, 450, 600mm lengths.  

Beta Tools 964 Pry Bar With Pointed And Leverage Ends

400mm  long. 46mm head length. Pointed and leverage end.

Beta Tools 374 Swedish Pattern Pipe Wrenches

45 degree slim jaws. Swedish pattern. Capacities: 240mm 1/2" gas and 21mm capacity. 320mm 1" gas and 34mm capacity. 410mm 1.5" gas and 49mm capacity. 550mm 2" gas and 60mm capacity. 630mm 3" gas and 90mm capacity.

Beta Tools 1036 175mm External Circlip Pliers

Straight pattern. 175mm total length. For circlips 19-60mm in diameter. PVC coated handles.

Beta Tools 1037 175mm External Circlip Pliers 45 Degree Angle

175mm total length. PVC coated handles. For circlips 19-60mm in diameter. Head is at a 45 degree angle.

Beta Tools 1037 140X09mm External Circlip Pliers 45 Degree Angle

140mm x 0.9mm. For circlips 3-10mm in diameter. External circlip pliers. Head is at a 45 degree angle. PVC coated handles.

Beta Tools 1034 130X09mm Internal Circlip Pliers 90 Degree Angle

Head is at a 90 degree angle. For circlips 8-12mm in diameter. Bent pattern. PVC coated handles.

Beta Tools 1034 170mm Internal Circlip Pliers, Bent Pattern, 90° PVC Coated Handles

Head is at a 90 degree angle. 170mm long. For circlips 19-60mm in diameter. Bent pattern. PVC coated handles.

Beta Tools 1033 140 x 09 Internal Circlip Pliers, Bent Pattern, 45° PVC Coated Handles

140mm x 0.9mm. For circlips 8-12mm in diameter. Internal circlip pliers. Bent pattern. 45 degree. PVC coated handles.

Beta Tools 1032 140X09 Internal Circlip Pliers

Internal circlip pliers. Circlip diameter 8 - 12mm. PVC coated handles. Straight pattern circlip pliers.

Beta Tools 96T Offset Hexagon Key Wrenches High Torque Handles

Offset hex key wrench. High torque handles. Different sizes available.  

Beta Tools 1702N Extra Wide Chisels

Extra wide chisels. 245mm total length. Either 50mm or 70mm wide.

Beta Tools 1701N/PM Masonry Chisels With Hand Guards

Fitted with hand guards. Masonry chisels. 23mm wide tip. 250mm or 300mm lengths.

Beta Tools 1032 180mm Internal Circlip Pliers Straight Pattern

180mm long internal circlip pliers. For circlips 19-60mm in diameter. PVC coated handles. Straight pattern.

Beta Tools 1036 140X09mm External Circlip Pliers

Straight pattern circlip pliers. External circlip pliers. PVC coated handles. 140mm long. For circlips 3-10 mm diameter.

Beta Tools 1054 Self Locking Pliers With Straight Jaws

235mm length. 40mm capacity. Straight jaws.

Beta Tools 1102 230 Bolt Cutters Small Series

4mm capacity. 230mm total length.  Small series bolt cutters.

Beta Tools 1052 Self Locking Pliers With Concave Jaw

Different lengths available 140, 190, 240 and 300mm. 140mm has a 48mm capacity. 190mm has a 60mm capacity. 240mm has a 72mm capacity. 300mm has a 75mm capacity.

Beta Tools Cape Chisels Various Lengths

Cape Chisels Available in 4mm 125mm Long 6mm 150mm Long

Beta Tools Cape Chisels Ribbed Type Various Lengths

Cape Chisels Ribbed Type Available in 6mm 150mm Long 8mm 200mm Long

Beta Tools Flat Chisels Ribbed Type Various Lengths

Flat Chisels Ribbed Type Available in 14.5mm 100mm Long 17mm 125mm Long 20.5mm 150mm Long 23mm 200mm Long 28.5mm 250mm Long 34mm 300mm Long

Beta Tools Centre Punches Various Lengths

Centre Punches Available in 3mm 100mm Long4mm 125mm Long5mm 150mm Long    

Beta Tools 8mm Pin Punch 200mm Long

Pin Punch 200mm Long Available in 8mm.

Beta Tools 6mm Pin Punch 180mm Long

Pin Punch 180mm Long Available in 6mm.

Beta Tools 5mm Pin Punch 165mm Long

Pin Punch 165mm Long Available in 5mm.

Beta Tools 4mm Pin Punch 145mm Long

Pin Punch 145mm Long Available in 4mm.

Beta Tools 2mm Pin Punch 110mm Long

Pin Punch 110mm Long Available in 2mm.

Beta Tools 3mm Pin Punch 130mm Long

Pin Punch 130mm Long Available in 3mm.

Beta Tools Drift Punches 150mm Long

Drift Punches 150mm long Available in 4mm, 5mm and 6mm.

Beta Tools Drift Punches 125mm Long

Drift Punches 125mm long Available in 2mm and 3mm.  

Beta Tools 920/42 1/2" Square Drive Sliding T Handle

1/2" Square drive. Sliding t handle. 305mm total length.

Beta Tools 42 Combination Wrench Open and Offset Ring End

Combination wrenches. Open and offset ring ends. DIN3113. UNI-ISO7738.  

Beta Tools 1719BMA8/T Second Cut Triangular File

Plastic handle. Triangular file. 200mm file blade length.

Beta Tools 1719BMA8/Q Second Cut Square File

Square file. 200 length file blade. Plastic handles.

Beta Tools 111 Adjustable Wrench Chrome Plated

Printed with scale on it in mm and Inch. Right handed rotation of the pin. Chrome plated. Max jaw capacity 200mm is 28mm. 250mm is 34mm, 300mm is 35mm, 380mm is 45mm, 450mm is 54mm and 600mm is 62mm

Beta Tools 1750 500cc Lever Operated Grease Gun

500cc. 380mm long grease gun. Lever operated. 1750.  

RST RTR88B Small Tool 5/8" Trowel and Square

Double ended. Made from carbon steel. Small trowel and square. 5/8" /16mm.

RST RDM04 30m/100ft x 13mm Tape Measure

Fibreglass tape measure blade. Metal end hook. Retractable handle. ABS plastic case. 30M long.

RST RTR6406 Tile Grouting Float Plastic Handle

Double hang. White non-marking surface. 9" x 4". (230mm x 100mm) Shaped grouting edges.

RST RSR6260S 10mm Square Notched Trowel Soft Touch Handle

Soft touch handle for user comfort. 10mm square notches. Carbon steel blade. Blade length 280mm x 113mm.  

RST RTR14SSD 14 x 4.75" Finishing Trowel

14 x 4.75" finishing trowel. Stainless steel blade. Alloy mounting. Soft touch handle.

RST RTR201S Flooring Trowel With Soft Touch Handle

16" x 4.5" (400 x 113mm) Soft touch handle. Features a pointed tip. Carbon steel blade.  

RST RTR137S 7" Bucket Trowel

7" length bucket trowel. Metal tang. Carbon steel blade. Rounded corners which allows you to clean out the bottom of the bucket when laying bricks. Soft touch handle.

RST RTR13SSD 13 x 4.5" Finishing Trowel

13 x 4.5". Alloy mounting. Soft touch handle. Stainless steel blade.  

RST RTR10110S 10" Soft Touch Philadelphia Pattern Brick Trowel

10" brick trowel. Soft touch handle for user comfort. Carbon steel blade. 254 x 127mm.

Bulldog BD2032T Hedge Shears Wavy Blade

Soft touch grips. Straight blade with wavy edge. Handle bumpers. Adjustable blade tension. Blade length 9" (230mm). Curved handles for user comfort.

Bulldog 2SM2PD No.2 Square Mouth Shovel 28" Wood PD

Bulldog 2SM2PD Ideal for trench work, concrete mixing, tarmac and shovelling Open socket meaning the steel is wrapped around the handle and secured into place by rivets No. 2 sized head which is designed to with hold repetitive use 28" Ash shaft with a YD handle which provides a secure grip when using the tool Epoxy coated head for improved resistance to rust, scratches and alkaline in the soil

Bulldog 8184170000 Premier Riddle 6mm / 1/4" Mesh

Bulldog 8184170000 All metal construction Pressed steel rim for a secure and tight joint Perfect for sieving soil and removing debris 1/4 inch / 6mm grid Powder coated head for improved resistance to rust, scratches and alkaline in the soil

Bulldog 8186170000 Premier Riddle 9mm / 3/8" Mesh

Bulldog 8186170000 All metal construction Pressed steel rim for a secure and tight joint Perfect for sieving soil and removing debris 3/8 inch / 9mm grid Powder coated head for improved resistance to rust, scratches and alkaline in the soil

Bulldog 1190004880 Floor Scraper 48" Handle

Bulldog 1190004880 The blade is manufactured from hardened spring steel for increased flexibility Perfect tool for removing oil, mud, rubber or general debris from a surface area The shaft is all metal for ultimate strength and is 48" in length to allow you to reach further Head width is 8" / 203mm Replacement blades are available for if your blade starts to wear

Bulldog 1191000000 Replacement Floor Scraper Blade

Pre drilled holes. 8" width blade. Can be fitted using wing nuts. Blued steel fabrication. Easily replaceable. Replacement blade for the 1190004880 floor scraper.  

Bulldog PM5SET 5lb Pick End Mattock with RIH36PB

Bulldog PM5SET Drop forged steel heads for ultimate strength and durability All heads pass British Standard: BS1421:1995 Points cut deep into hard ground, asphalt and concrete Head weight of 2.25kg Head fitted to 36" ash wooden pick handle for a secure and reliable hold

Bulldog BCB70MB Mushroom Digging Bar 70 Inch

70 Inch long. 2.5 Inch wide. Green shaft. Digging bar.

Bulldog Chisel & Point Crowbar 60 x 1 1/8 Wrecking Bar BCB60CP

Chisel and point. 60 inch long 1.1/8 inch thick. Hexagonal shaft. Green.

Bulldog BPR Plastic Garden Leaf Rake

Head size 21" x 24" (535 x 610mm). Wide plastic head with 48" ash shaft. Cranked tooth design. Made in Britain. Entry level rake. Plastic tines are cranked for better collection of the materials.  

Bulldog BFR Standard Straight Garden Rake

Ash shaft. Carbon steel blade. Flat blade design. Flat metal head. Made in Britain. Entry level rake.

Bulldog 5SM2AM All Metal No.2 Square Mouth Shovel 28" MYD

Bulldog 5SM2AM The head is solid forged from one piece of steel for ultimate strength and durability Metal YD grip with wooden cross dowel for increased comfort Epoxy coated head for improved resistance to rust, scratches and alkaline in the soil Ideal for trench work, concrete mixing, tarmac and shovelling No. 2 sized head which is designed to with hold repetitive use

Bulldog BD1113Y2 Compound Bypass Lopping Shears

38mm cutting capacity. Bypass cutting action. Compound cutting action allows you to apply much greater pressure when cutting. Aluminium handles with soft touch grips.

Bulldog 8172170880 Premier 6" All Metal Household Shovel

Bulldog 8172170880 Perfect for clearing up and loading coal Designed with a useful hanging hole for storage All metal designed with a blade which sits flush to the ground The shovel is 6"/ 150mm in width Lightweight design with raised edges to prevent spillage 

Marshalltown M89 Chariot Style Joint Rakers

Replaceable masonry nail. Contoured metal handle. Adjustable nail. For removing mortar.  

Marshalltown M632 Flurescent Yellow Braided Nylon Mason's Line

87m length. Flurescent yellow brick line. Not affected by mortar, oil, mildew, will not absorb water. For staking out sites before concreting, landscaping or laying bricks and blocks. Heat set after winding to stabilize. Core 4".

Marshalltown M631 Flurescent Pink Braided Nylon Mason's Line

87m length. Florescent pink brick line. Not affected by mortar, oil, mildew, will not absorb water. For staking out sites before concreting, landscaping or laying bricks and blocks. Heat set after winding to stabilize. Core 4".

Everbuild Stixall Clear 300ml Tube Sold Individually

Clear. 300ml tube. Sold individually.

Milwaukee Dynacase Powertool Case Toolbox Carrying Case Size 1

4932453385 Size 1 Dynacase Empty Toolcase 475mm x 358mm x 132mm Some boxes may have an inlay in as these are spilt from kits but these do just pull out as they are glued in.  

Carl Kammerling T9410 Clip On Pen Pocket Inspection Light 120 lumens

8 LED pocket inspection lamp. Small and compact design. Style of a pen size. Can easily be carried in your pocket when not in use due to the size of it. 120 Lumens. Requires 3 x AAA batteries not supplied.

Milwaukee M18TLED-0 18v Cordless Torch Led Torch 160 Lumen Torch Only

Supplied as the torch only, no batteries included. 160 lumen Led light. 135 degree rotating head. M18 led electronics. Sealed aluminium head, impact and weather resistant. Works off all the M18 Milwaukee batteries.

Makita Tool Bag LXT Duffel Carry Bag With Shoulder Strap 831278-2

Bag that's used for the 4 piece kits. Heavy duty construction. Can fit lots of machines in with chargers and batteries. Comes with a shoulder strap.

Irwin Marples splitproof wood chisel

Available in different sizes. Splitproof handle - can be used with a hammer.   Rust protected due to lacquer on the blade.   Long working life hardened blade.   Ready to use - Sharp.   Forged one piece of metal blade.

Own Brand 5 Metre Tape Measure Alan Wadkins Branded

5 metre tape measure. 22mm wide tape. 4 rivet magnetic end. Belt clip. Fabric loop.

Draper Combination Spanner Ring & Open End Offset At 15 Degrees

Made from hardened and tempered chrome vanadium steel. Ring and open end off set at 15 degrees. The length varies from 115mm - 390mm depending on the size of the spanner.

Draper Expert Hi-Torq Metric Flexible Head Ratcheting Combination Spanner

Made from chrome vanadium steel, hardened, tempered, chrome plated and fully polished. Open end is set at 15 degrees. Ratchet end is flexible. Available in a range of sizes. Ideal for use in small areas.

Impact Socket Supplies 24mm Open End Podger Spanner

Open End podger spanner. Without tethering rings. Head length 4cm. Overall length 37.5cm. Picture for illustration purposes, as it is not the correct size.

Impact Socket Supplies 19mm Open End Podger Spanner

Open End podger spanner. Without tethering rings. Head length 4cm. Overall length 36cm. Picture for illustration purposes, as it is not the correct size.

Handmade Wooden Hay Rake – Landscape Rake with 16 Tines

Wooden landscape rake 16 wooden tines 1800mm length (6ft) 780mm width all wooden

Dustbin Bags Roll of 20

Dustbin bags. 32 inches length. Sold in a pack of 20.

Roughneck 64-409 Gorilla Bar 36 Inches Long

The low profile claw design allows it to fit under the object further for better power. Wide claw stops it from denting the surface. Manufactured from hardened and tempered alloy steel with polished tips. The oval shaped design provides more strength and increased control. Gorilla bar 36".

Draper Scutch Combs 3 Piece Set 22266

Can be used with following Draper part numbers 40871, 40948, 71269, 78203, 11504, 57539, 22266, 54252. Pack of 3.

Bulldog Metal Drainer 5NDAM All Metal 16" Newcastle Drainer 28" MYD

Bulldog 5NDAM The head is solid forged from one piece of steel for ultimate strength and durability Metal YD grip with wooden cross dowel for increased comfort Long thin head for digging deep and narrow trenches or holes Epoxy coated head for improved resistance to rust, scratches and alkaline in the soil 

Barrier Tape 75mm wide

75mm wide barrier tape. Available in red/white or yellow/black. Non adhesive tape.

Reliable Source Black Cloth Tape 100mm x 50 Metre Black Cloth Tape

Please note this is 100mm wide picture shown is 50mm wide. Black cloth tape. 100mm wide. 50m long. strong, salt water resistant, easy unwind and tear.

Draper 300mm Flexible Plastic Grease Gun Hose

300mm long delivery tube. Safe working pressure 240bar/3500psi. 1/8" BSPT thread at both ends.

FORANKRA PRITCHARD 4 Metre Ratchet Strap Tie Down Strap 25mm Wide Wagon Strap

Ratchet strap 4mtr x 25mm 800kh hook light duty

Spear & Jackson 1990EL/09 Select Stainless Steel Digging Fork

1990el 28" shaft 39" overall 280mm (11") blade x 180mm (7") head size stainless steel head Polypropylene shaft

FORANKRA PRITCHARD VL500 10 Metre Ratchet Strap Heavy Duty Wagon Tie Down Strap 10m x 50mm

10 metre long. 50mm wide ratchet straps. 5000kg. Claw hook end fittings. Long wide handle ratchet.

Reliable Source Cloth Tape Gaffa Tape 50mm x 50 Metre Length

50 metre roll of cloth tape. Available in black, silver or white. Sold individually.

Stabila STB 70-2 3 Vial Spirit Level

Lightweight Spirit Level Suitable for DIY Or Professional use Rectangular Design Shape Level has 3 Vials

Wiha SoftFinish Pozidriv Screwdriver with Round Blade

Soft grip handle for user comfort. Blades are made from CVM steel which has been chrome plated to provide a long lasting product. Good fit into the screw due to the Wiha ChromTop finish that has been applied to the tips. Symbols are printed on the top of the handles for easy identification. Pozidriv screwdriver with a round blade.

Wiha Picofinish Phillips Screwdriver with rotating cap

Slim line design for small areas and high precision work. Soft grip handle for user comfort. Blades are made from chrome vanadium molybdenum steel that has been chrome plated for a long life. Wiha ChromTop ensures a good hold in the screw. Rotating cap for quick spinning of the screwdriver.

Marshalltown Brick Jointer Carbon Steel

Made from high carbon steel. Both ends are different sizes. Ideal for use in making different sized joints in brickwork. Tapered front end

Dormer A002 Jobber Drill Bit HSS

HSS high speed steel drill bit. Titanium Nitride coating is applied to increase performance. Dormers designed P.S.Point provides accurate drilling and easy penetration. Wide flutes aid with quick extraction of unwanted material. Price breaks on quantities 1, 5 and 10 when added to the basket.

Festool 495209 Splinterguard FS-SP5000T For FS, FS/2 and FSK guide rails

Spare Festool splinter guard for guide rails Transparent

Wiha PZ1 x 80 Softfinish Electric Slimfix Screwdriver Pozidriv

Blades are made from hardened chrome-vanadium-molybdenum steel with a black finish. Ergonomic SoftFinish handle. Suitable for work up to 1000 VAC. Insulation is moulded directly onto the blade.

Wiha WHA-35393 PH1 x 80mm Softfinish Electric Slimfix Screwdriver Phillips

Blades are made from hardened chrome-vanadium-molybdenum steel with a black finish. Ergonomic SoftFinish handle. Suitable for work up to 1000 VAC. Insulation is moulded directly onto the blade.