HMT HSS-SET2 HSS Broaching Kit (12-26mm)

HMT HSS-SET2 HSS Broaching Kit (12-26mm) HSS Broach Cutters 12, 14, 18, 22, 26mm - 2 Pilot pins - Protective site case

HMT HSS SilverMax Long Series Broach Cutter

107010 silver max hss 50mm rota broach cutters fit any standard mag drill m2 hss tool steel

HMT 107020P-0500 HSS Rota Broach Cutter Pilot Pin Short Series 12-50mm Pack of 2

107020P-0500 Silvermax rota broach pilot pin short reach pack of 2

HMT 107010P-0500 Rota Broach Pilot Pin Long Series Pack Of 2

107010p-0500 50mm long series pilot pins 2 in pack for use with the 107010 range of cutters

HMT 107020 Silver Max Short Series HSS Mag Cutter Rota Broach Bit 25mm Long

107020 series 25mm short series rotabroach cutter used on metal up to 25mm thick precision ground from high grade m2 hss tool steel fit any standard mag drill

HMT 107020-Set HSS SilverMax Short Reach Rota Broach Cutter Set 14,18,22mm + Pilot Pin

107020-SET 14,18,22mm short reach cutters pilot pin 25mm long cutters fit any standard mag drill m2 hss tool steel

HMT 107020-5Set 5 Piece Short Reach Rota Broach Set 12,14,18,22,26mm + Pilots

107020-5set 12,14,18,22,26mm cutters 2 x pilot pins 25mm in length m2 hss tool steel for any standard mag drill

HMT 107010-Set HSS Silver Max Rota Broach Cutter Set 14,18,22 + Pilots

107010-SET - Contains 14,18,22mm x 50mm long cutters 2 x pilot pins silvermax hss cutters fit any standard mag drill

HMT 107010-5SET HSS Long Series 50mm Silver Max Rota Broach Cutter Set 12,14,18,22,26mm

107010-5SET 12,14,18,22+ 26mm cutter 50mm long 2 x pilot pins silver max hss cutter fit any standard magnetic drill

HMT 107020-SS1 Short Series Rota Broach Cutter Starter Set 25mm Long

107020-ss1 contains silver max hss cutters 14,18,20,22,24,26mm weldon twist shank drills 6,8,10,10.2,12mm pilot pins 30mm goldmax 90" countersink bit

HMT 107010-SS1 Long Series Rota Broach Cutter Starter Set 50mm Long

107010-SS1 silver max hss cutters 14,18,20,22,24,26mm x 50mm long weldon twist shank drills 6,8,10,10.2,12mm pilot pins 30mm goldmax 90" countersink bit

HMT 505020-SET2 Versadrive Impact Step Drill Bit Set 4 Piece 12, 20, 30, 40mm

505020-SET2 12mm, 20mm, 30mm & 40mm versadrive 5mm drilling capacity 135° split point angle for easy starting and high accuracy Hardened for impact wrench use 8% cobalt for long life and endurance in structural steel and hard metals Adaptors shown in images are sold separately.

HMT 209015-SET2 VersaDrive TurboTip Impact Drill Bit Set 6, 7, 8, 9, 10, 11, 12mm

209015-SET2 6, 7, 8, 9, 10, 11, and 12mm bits in box Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT Drill Bit Set 209015-SET3 VersaDrive TurboTip Impact Bit Set 6.8, 8, 8.5, 10, 10.5, 12, 14mm

209015-SET3 6.8, 8, 8.5, 10, 10.5, 12, and 14mm bits in box Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately. 

HMT CarbideMax 80 Broach Cutter Pilot Pin 2 Pack

HMT 108010P-0170 2 Pack  CarbideMax 80 Broach Cutter Pilot Pin 12-17mm CarbideMax TCT Magnet Broach Cutter

HMT STC-TOP-VCM01 VersaDrive STAKIT Top Toolcase - Rotary Kit

HMT VersaDrive STAKIT Top Toolcase Rotary Kit STC-TOP-VCM01 Kit Includes; 108030 CarbideMax Broach Cutters 12, 14, 18, 22, 26mm4 Pilot Pins101030 VersaDrive HoleCutters 14, 16, 18, 20, 22, 26mm

HMT CarbideMax 55 TCT Magnet Broach Cutter

55 Series will broach up to 50mm thickness of metal TCT Broach cutters are tipped with individually brazed cutting teeth of the highest quality carbide

HMT M24 x 3.0mm VersaDrive ImpactaTap Metric Coarse Thread

m24 x 3.0mm  Hex shank suitable for drills up to 10mm tap size can be driven by impact wrenches and mag drills Adapters shown in images are sold separately 

HMT 111035-01 Versa Drive Rapid-Lock Weldon Adapter

111035-01 19.05mm/3/4" Weldon Magnet Drill Shank New Rapid-Lock, single handed loading Drill bits shown in images are sold separately  

HMT 501030-0080 8mm Impact Power Tool Reamer VersaDrive

8mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT 209015-SET4 VersaDrive TurboTip Impact Drill Bit Set 6, 8, 10, 12, 14, 18 & 22mm

Contains 6,8,10,12,14,18 and 22mm. Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 101030-SET2 VersaDrive TCT HoleCutter 5 Piece Set 14, 17, 18, 21, 22mm

5 piece set containing 14, 17, 18, 21, 22mm   tct hole cutter Use in any standard drill chuck Massive 70mm reach with 55mm depth of cut 10x greater than standard bi-metal "starrett" type holesaws Rated for steel, structural steels, stainless steel (inox), Aluminium, Cast Iron, Brass, Copper, Fibreglass, composite and sandwich materials, plastics, and wood

HMT 501030-SET VersaDrive Impact Reamer Set, 12, 14, 18, 22, 26mm

Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Supplied in plastic case Contains the following sizes 12-14-18-22-26mm. Adapters shown in images are sold separately.

HMT M20 x 2.50 VersaDrive ImpactaTap Metric Coarse Thread

m20 x 2.50 Hex shank suitable for drills up to 10mm tap size can be driven by impact wrenches and mag drills. Adapters shown in images are sold separately   

HMT 308010-0300 M30 x 3.50mm VersaDrive ImpactaTap Metric Coarse Thread

m30 x3.50mm Hex shank suitable for drills up to 10mm tap size can be driven by impact wrenches and mag drills, Adapters shown in images are sold separately.

HMT 328015-SET1 VersaDrive TurboTip & ImpactaTap Combi Set

HMT 328015-SET1 VersaDrive TurboTip & ImpactaTap Combi SetContains; 6.8, 8.5m 10.5 and 14mm TurboTips M8, M10, M12 and M16 ImpactaTaps

HMT VersaDrive TCT HoleCutter Set 14mm, 18mm, 22mm 101030-SET1

101030-SET1 14mm, 18mm, 22mm, Use in any standard drill chuck Massive 70mm reach with 55mm depth of cut ideal for drilling channel, box section and thick steel 10x greater than standard bi-metal "starrett" type hole saws  

HMT 301125-SET1 VersaDrive Combination Drill-Tap Set 5 Piece M5 M6 M8 M10 M12

301125-SET1 5 Piece set M5, M6, M8, M10, M12 Ground flute twist drill creates the perfect tapping hole Safer tapping with minimal kickback GoldMax low-friction titanium coating to stop heat burn out High-strength, non-slip shank design

HMT 505020-SET1 VersaDrive Step Drill Bit Set 3 Piece 12mm 20mm 30mm

505020-SET1 12mm, 20mm & 30mm VersaDrive 5mm drilling capacity 135° split point angle for easy starting and high accuracy Hardened for impact wrench use 8% cobalt for long life and endurance in structural steel and hard metals  

HMT 108030-SET CarbideMax 40 TCT Broach Cutter 3 Piece Set 14,18,22mm 2 Pilots

108030-SET 14mm, 18mm, 22mm 2 x pilots 10x longer life & 64% faster cut than hss cutters tipped with brazed cutting teeth

HMT 501030-0260 26mm Impact Power Tool Reamer VersaDrive

501030-0260 26mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT 505020-0120 4-12mm VersaDrive Impact Step Drill Bit

505020-0120 4-12mm step drill bit 5mm thick drilling capacity ground flutes with easy chip clearance 135° split point angle for easy starting & accuracy Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills. Adaptors shown in images are sold separately.

HMT 505020-0220 4-22mm VersaDrive Impact Step Drill Bit

505020-0220 4-22mm step drill bit 5mm thick drilling capacity ground flutes with easy chip clearance 135° split point angle for easy starting & accuracy Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills. Adaptors shown in photos are not included

HMT 505020-0300 4-30mm VersaDrive Impact Step Drill Bit

505020-0300 4-30mm step drill bit 5mm thick drilling capacity ground flutes with easy chip clearance 135° split point angle for easy starting & accuracy Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills. Adaptors shown in images are sold separately.

HMT 505020-0400 6-40mm VersaDrive Impact Step Drill Bit

505020-0400 6-40mm step drill bit 5mm thick drilling capacity ground flutes with easy chip clearance 135° split point angle for easy starting & accuracy Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills.

HMT 10mm Versadrive Impact Power Tool Reamer 501030-0100

501030-0100 10mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT 12mm VersaDrive Impact Power Tool Reamer 501030-0120

501030-0120 12mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT 14mm Impact Power Tool Reamer VersaDrive 501030-0140

501030-0140 14mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT 501030-0200 20mm Impact Power Tool Reamer VersaDrive

501030-0200 20mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT 501030-0160 16mm Impact Power Tool Reamer VersaDrive

501030-0160 16mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adapters shown in images are sold separately.

HMT 501030-0180 18mm Impact Power Tool Reamer VersaDrive

501030-0180 18mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT 501030-0220 22mm Impact Power Tool Reamer VersaDrive

501030-0220 22mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT Versadrive Impact Reamer Set 3 Piece 14, 18, 22mm 501030-3SET

501030-3SET 14, 18, 22mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adapters shown in images are sold separately. 

HMT 308010-SET1 VersaDrive ImpactaTap 5 Piece Tap Set M6 M8 M10 M12 M16

308010-SET1 m6. m8, m10, m12, m16 Hex shank suitable for drills upto 10mm tap size can be driven by impact wrenches and impact drivers

HMT M10 x 1.5mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0100 m10 x 1.5mm Hex shank suitable for drills upto 10mm tap size can be driven by impact wrenches and impact drivers Adapters shown in images are sold separately 

HMT M12 x 1.75mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0120 m12 x 1.75mm Hex shank suitable for drills upto 10mm tap size can be driven by impact wrenches and impact drivers, Adapters shown in images are sold separately 

HMT M14 x 2.0mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0140 m14 x 2.0mm Hex shank suitable for drills upto 10mm tap size can be driven by impact wrenches and impact drivers, Adapters shown in images are sold separately 

HMT M16 x 2.0mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0160 m16 x 2.0mm Hex shank suitable for drills upto 10mm tap size can be driven by impact wrenches and impact drivers Adapters shown in images are sold separately 

HMT M5 x 0.8mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0050 m5 x 0.8mm Hex shank suitable for drills up to 10mm tap size can be driven by impact wrenches and impact drivers,  Adapters shown in images are sold separately 

HMT M6 x 1.0mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0060 m6 x 1.0mm Hex shank suitable for drills up to 10mm tap size can be driven by impact wrenches and impact drivers Adapters shown in images are sold separately 

HMT M8 x 1.25mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0080 m8 x 1.25mm Hex shank suitable for drills upto 10mm tap size can be driven by impact wrenches and impact drivers Adapters shown in images are sold separately 

HMT CarbideMax 40 Broach Cutter Pilot Pin 12-17mm Cutters Pack of 2

108030P-0170 6.34 x 90mm pack of 2 to suit 12-17mm max40 cutters High quality, fully ground HSS pilot ejector pin for CarbideMax 40 TCT Broach cutters

HMT CarbideMax 40 Broach Cutter Pilot Pin 12-17mm Cutters Pk10

108030P-0170-p10 6.34 x 90mm pack of 10 to suit 12-17mm max40 cutters High quality, fully ground HSS pilot ejector pin for CarbideMax 40 TCT Broach cutters

HMT CarbideMax 40 Broach Cutter Pilot Pin 18-80mm Cutters Pack of 10

108030P-0600-p10 to suit 18-80mm cutters pack of 10 7.98 x 90mm High quality, fully ground HSS pilot ejector pin for CarbideMax 40 TCT Broach cutters

HMT CarbideMax 40 TCT Magnet Broach Cutter

CarbideMax™ 40 Series will broach up to 35mm thickness of metal CarbideMax™ TCT Broach cutters are tipped with individually brazed cutting teeth of the highest quality carbide  

HMT 103011-0001 Magnetic Swarf Lifter

103011-0001 swarf lifter 400mm length    

HMT 108020P-0600 CarbideMax 55 Broach Cutter Pilot Pin

108020P-0600 fully ground HSS pilot ejector pin for CarbideMax 55  

HMT 108020-SET CarbideMax 55 TCT Broach Cutter Set 14 18 22 2 x Pilots

108020-SET 14mm 18mm 22mm 2 x pilots upto 10x longer life 64% faster the hss cutters CarbideMax™ TCT Broach Cutters

HMT 55mm Deep VersaDrive TCT Hole Cutter

Hole Maker Technology (HMT) 101030  VersaDrive TCT Hole Cutter  55mm Deep Use in any standard drill chuck Massive 70mm reach with 55mm depth of cut 10x greater than standard bi-metal "starrett" type holesaws Rated for steel, structural steels, stainless steel (inox), Aluminium, Cast Iron, Brass, Copper, Fibreglass, composite and sandwich materials, plastics, and wood

HMT CarbideMax 150 Broach Cutter Pilot Pin 18-50mm 2 Pack

HMT 108045P-0600 Pack of 2 Pilot Pins for 108045 18-50mm CarbideMax TCT Magnet Broach Cutter 7.98 x 205mm Precision ground steel Bright Finish