HMT S50 Steelbor Magnetic Mag Drill 110v 50mm Capacity In Case

850250-110 110v machine 50mm max hss cutter capacity 55mm tct cutter capacity 150mm max cutter length 160mm stroke length 18m twist drill capacity 1200 watt motor 3/4 weldon spindle

HMT STC-EMID-MAX01 14-39mm Max Impact Reamer Set 10 Piece

STC-EMID-MAX01 contains 10 max reamers sizes 14,18,20,22,24 26,30,32,36,39 1 x 3/4 max impact wrench adaptor 1 x max magnet drill adaptor 1 x stakit emid case

HMT STC-EMID-MAX04 Versadrive Max Broach Ream & Tap Set 15 Piece

STC-EMID-MAX04 Carbide max 55mm tct broach cutters 24,24,26.5,30 & 32mm Versadrive max impacta taps 24,27,30,33 & 36mm versa drive max impact reamer 14,18,22,26 & 32mm 3/4 versa drive impact wrench adaptor 19.05mm max magnet drill adaptor stakit emid case

HMT Ultimate 18v Cordless Kit Combi Drill, Impact Wrench and MagDrill C/W 4 Batteries Charger and Case

HMT Combi Drill & Impact Wrench Combo Set 2x 4ah Batteries Charger and Case

- Powerful & compact brushless Impact wrench - Rated for metal drilling, threading & hole enlargement - Compact, brushless combi pistol drill - Engineered for precise metal drilling & countersinking

HMT TurboTip Cobalt Jobber Drill 25Pce Set 1-13mm 202050-SET2

- Stepped tip design for fast, accurate, pilot-free drilling - Excellent performance in Stainless Steel - Outstanding heat and wear resistance for longer life - Exact, circular holes with minimal pressure & burr-free finish

HMT Versadrive TCT Sheetcutter Holesaw 5Pce Set 14/18/20/22/26mm 101050-SET2

Up to 4mm depth of cut on Mild Structural Steel Excellent for use on Stainless Steel up to 4mm thick Use on Aluminium up to 4mm thick Premium quality Tungsten Carbide teeth with adjacent swarf discharge grooves for clean, clog-free cuts

HMT 101050-SET1 Versadrive TCT Sheetcutter Holesaw 3pce Set 14/18/22mm

Up to 4mm depth of cut on Mild Structural Steel Excellent for use on Stainless Steel up to 4mm thick Use on Aluminium up to 4mm thick Premium quality Tungsten Carbide teeth with adjacent swarf discharge grooves for clean, clog-free cuts

HMT TurboTip Cobalt Jobber Drill 7pce Set 3-10mm 202050-SET4

- Stepped tip design for fast, accurate, pilot-free drilling - Excellent performance in Stainless Steel - Outstanding heat and wear resistance for longer life - Exact, circular holes with minimal pressure & burr-free finish

HMT TurboTip Cobalt Jobber Drill Set 19pce 1-10mm 202050-SET1

- Stepped tip design for fast, accurate, pilot-free drilling - Excellent performance in Stainless Steel - Outstanding heat and wear resistance for longer life - Exact, circular holes with minimal pressure & burr-free finish

HMT Versadrive TCT Sheet Metal Cutter Holesaw

For drilling up to 4mm thick in mild steel, stainless steel and aluminium Clean clog free cuts Can fit into 1/2in drill chucks

HMT Turbotip Cobalt Jobber Drill Bit

- Stepped tip design for fast, accurate, pilot-free drilling   - Excellent performance in stainless steel   - Outstanding heat and wear resistance for longer lifespan   - Creates precise, burr-free, circular holes with minimal pressure   - 3 shank flats for secure, non-slip operation   - Fits in any standard 1/2" drill chuck or magnet drill   - Rotary rated — not suitable for impact drills

HMT Toolcase and Apadtor Set 111130A + MKC-Etop2

1 x Large InsertFoams 2 x Small InsertFoams Fit into the case VersaDrive Stakit Half Top Toolcase 11130-012A 1/2 adaptor Converts standard 1/2” Impact Wrenches for use with VersaDrive    

HMT Versadrive Stakit Half Top Case To Fit 2 Small or 1 Large Foam Insert MKC-ETOP2

- Customizable storage with options for a large or two small foam inserts   - Expandable as your system grows   - Clips onto other top cases or EMID boxes   - Features foam inserts for Versadrive and Carbidemax products   - Made from durable, waterproof, and dustproof injection-moulded plastic   - Provides reliable protection for tools and components

HMT S50 Steelbor Magnetic Drill Machine Kit 240v

1200 Watt Motor 55mm TCT Cutter Capacity 32mmCountersink Capacity Protective Case and Accessories Supplied As Standard

HMT SteelBor S36 Magnetic Drill Compact Mag Drill 36mm Capacity In Case

36MM TCT Cutter Capacity 25mm Max Countersinking 1050 Watt Motor 10Kg Weight

HMT HSS-SET2 HSS Broaching Kit (12-26mm)

HMT HSS-SET2 HSS Broaching Kit (12-26mm) HSS Broach Cutters 12, 14, 18, 22, 26mm - 2 Pilot pins - Protective site case

HMT MKC-ETOP4 VersaDrive STAKIT Full Top Case

HMT MKC-ETOP4 VersaDrive STAKIT Full Top Case L x W x H (mm) 540 x 390 x 95 Fully customisable to your needs Foam inserts available for VersaDrive® and CarbideMax products Compatible with all VersaDrive® tooling Waterproof Dustproof Durable injection moulded plastic

HMT VersaDrive ETOP4 Turbo Impact Kit + 4AH VersaDrive 1/2" Impact Wrench Kit

HMT JS25-STC-COMBO2 VersaDrive ETOP4 Turbo Impact Kit + 4AH VersaDrive 1/2" Impact Wrench Kit Set Includes; ETOP4 Turbo Impact Kit: 7 x VersaDrive TurboTip Impact Drill Bits - 6.8, 8, 8.5, 10, 10.51 12 and 14mm 5 x VersaDrive ImpactTaps - M6, M8, M10, M12 and M16 3 x VersaDrive Impact Reamers - 14, 18 and 22mm 2 x VersaDrive TurboTip ImpactaStep Cutters - 8-16mm & 18-26mm 1 x VersaDrive Rapid-Lock 1/2" Impact Wrench Adapter 1 x VersaDrive 130mm Rapid-Lock Extension Arbor 1 x VersaDrive STAKIT Full Top Case VersaDrive 1/2" Impact Wrench Kit; 1 x V18-900 18v 1/2" Impact Wrench 2 x 4ah 18v Batteries 1 x Charger 1 x VersaDrive Rapid-Lock 1/2" Impact Wrench Adapter 1 x Protective Site Case Impact Wrench Specification; Anvil/Drive Size: 1/2" No Load Speed (RPM) 1500 / 2000 / 2500 Impact Modes: 3 Impact Torque: 400 / 630 / 900Nm Impact Rate (BPM) 1600 / 2200 / 2700 Drilling/ Fastening Torque 900Nm Nut Busting Modes 1 Nut Busting Torque: 1180Nm Weight (w/o battery) 1.9kg Weight (with 4ah battery) 2.5kg Warranty 1 Year Battery Compatibility: HMT 18v Batteries & Makita LXT

HMT VersaDrive TurboTip Impacta Step Cutters

HMT VersaDrive TurboTip Impacta Step Cutters 506040-0160 8-16mm - Step Diameters 8, 10, 12, 14 and 16mm. Step Depth 12mm. 11mm VersaDrive Shank. Total Length 112mm. 506040-0220 14-22mm - Step Diameters 14, 16, 18, 20 and 22mm. Step Depth 12mm. 11mm VersaDrive Shank. Total Length 115mm. 506040-0320 24-32mm - Step Diameters 24, 26, 28, 30 and 32mm. Step Depth 12mm. 11mm VersaDrive Shank. Total Length 123mm. 5 heavy duty drill bits in one tool Drill new & enlarge existing holes in metal up to 12mm thick Safety collar prevents injury & damage when using the largest step Upgraded spiral-flute design for increased performance and swarf clearance Heavy-duty hex shank design for secure non-slip operation Industrial grade Titanium Nitride coating reduces heat buildup and burn-out Impact-rated due to dual hardening process - allows up to 15X faster speed than traditional methods Use on Impact to prevent dangerous kickback

HMT Turbo Drilling Kit + V18-900 Impact Wrench

HMT Turbo Drilling Kit + V18-900 Impact Wrench Turbo Drill Kit includes; 4 x VersaDrive TurboTip Impact Drill Bits 6, 8, 10 & 12mm 3 x VersaDrive TurboTip Cone Cutters 20, 25 & 32mm 3 x VersaDrive TurboTip ImpactaStep Cutters 8-16mm, 14-22mm & 18-26mm 1 x VersaDrive Rapid-Lock 1/2" Impact Wrench Adapter 1 x VersaDrive STAKIT Half Top Case

HMT Turbo Impact Starter Kit + V18-900 Impact Wrench

HMT Turbo Impact Starter Kit + V18-900 Impact Wrench Start Kit includes; 4 x VersaDrive TurboTip Impact Drill Bits 6.8, 8.5, 10.5 & 14mm 4 x VersaDrive ImpactaTaps M8, M10, M12 & M16 3 x VersaDrive TurboTip ImpactaStep Cutters 8-16mm, 14-22mm & 18-26mm 1 x VersaDrive Rapid-Lock 1/2" Impact Wrench Adapter 1 x VersaDrive 130mm Extension Arbor 1 x VersaDrive STAKIT Half Top Case

HMT 506040-SET1 VersaDrive TurboTip ImpactaStep Cutters

HMT 506040-SET1 VersaDrive TurboTip ImpactaStep Cutters 3pc set STAKIT Small InsertFoam set, compatible with STAKIT ETOP2 and ETOP4 Top Cases (available separately) 16, 22 & 26mm TurboTip ConeCutters Step Depth 12mm 11mm VersaDrive® hex shank • 5 heavy duty drill bits in one tool • Drill new & enlarge existing holes in metal up to 12mm thick • Safety collar prevents injury & damage when using the largest step • Upgraded spiral-flute design for increased performance and swarf clearance • Heavy-duty hex shank design for secure non-slip operation • Industrial grade Titanium Nitride coating reduces heat buildup and burn-out • Impact-rated due to dual hardening process - allows up to 15X faster speed than traditional methods • Use on Impact to prevent dangerous kickback

HMT V18-900 1/2" Drive 18v Cordless Impact Wrench 900nm Torque Brushless 2 x 4.0ah Batteries + Charger

AJ25-808010-025 V18-900 2 x 4.0ah batteries, charger + case 1/2 drive impact wrench 3 modes 400/630/900nm tightening torque 1180nm nut busting torque fits 18v hmt or Makita 18v lxt batteries    

HMT V18-900 1/2" Drive 18v Cordless Brushless Impact Wrench 900nm Torque Body Only

808010-010 v18-900 1/2 drive impact wrench machine only 3 modes 400/630/900nm tightening torque 1180nm nut busting torque fits 18v hmt or Makita 18v lxt batteries  

HMT AJ25-131000-SET1 M8-M24 Versadrive Impact Wrench Clutched Adapter Set

AJ25-131000-SET1 1/2 impact wrench clutched adapter m8-m12 1/2 impact wrench clutched adapter m12-m16 1/2 impact wrench clutched adapter m20-m24 m8,m10,m12,m16,m20,m24 versa drive spiral flute taps stakit emid case

HMT 505050-SET1 VersaDrive TurboTip ConeCutter

HMT 505050-SET1 VersaDrive TurboTip ConeCutter Includes; 505050-0200  505050-0250 505050-0320 Safety Collar prevents injury & damage Spiral flute design Industrial grade Titanium Nitride coating reduces heat buildup and burn-out Use on Impact to prevent dangerous kickback caused by handheld rotary tools Heavy-duty hex shank design for secure non-slip operation Quality results on stainless steels and Inox - rotary application recommended VersaDrive patented shank and modular adapters provide unbeatable jobsite flexibility Impact-rated due to dual hardening process - allows up to 15 X faster speed than traditional methods  

HMT 309210-SET1 Versadrive 5 Piece Thread Chaser Kit M6 M8 M1 M12 M16

AJ25-309210-SET1 M6, M8, M10,M12,M16  Thread chaser supplied in a foam insert hd hex shank for non slip operation impact rated, works 15x faster than traditional methods supplied in a foam inlay for cleaning out paint or debris from existing threaded holes.

HMT AJ25-309210-SET2 Versadrive 4 Piece Thread Chaser Kit M12 M16 M20 M24

AJ25-309210-SET2 M12, M16 M20 M24 Thread chaser hd hex shank for non slip operation impact rated, works 15x faster than traditional methods supplied in a foam inlay for cleaning out paint or debris from existing threaded holes.

HMT 402250 Ali CutTCT Burr Flame 6mm Shank

6mm shank. Flame burr. Choose from 6mm or 12mm head. AliCut TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life.Designed for use on Aluminium and other non-ferrous metals.All burrs are 100% braze tested for strength and safety

HMT 402260 Ali CutTCT Burr Tree

AliCut TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life. Designed for use on Aluminium and other non-ferrous metals. All burrs are 100% braze tested for strength and safety. Tree Burr. Choose from 6mm or 12mm head. 6mm shank.

HMT 4022-SET1 Ali CutTCT Burr 12mm 4Pc Set

Handy 4pc Set Case containing 1 each Flame, Cylinder, Ball Nose, and Tree burrs in 12mm head diameter (standard 6mm Shank)  AliCut TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life. Designed for use on Aluminium and other non-ferrous metals. All burrs are 100% braze tested for strength and safety.

HMT 4022-SET2 Ali CutTCT Rotary Burr Set 4 Piece 6mm Shank

Handy 4pc Set Case containing 1 each Flame, Cylinder, Ball Nose, and Tree burrs in 6mm head diameter (standard 6mm Shank)  AliCut TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life. Designed for use on Aluminium and other non-ferrous metals. All burrs are 100% braze tested for strength and safety.  

HMT 402150-0120 Uncoated TCT Burr 12mm Flame 6mm Shank

HMT TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life. These burrs are recommended for use with high-speed die grinders or straight grindersAll burrs are 100% braze tested for strength and safety.  12mm x 32mm head. 6mm shank.

HMT 4021 TCT Burr 4 Piece Set

Handy 4pc Set Case containing 1 each Flame, Cylinder, Ball Nose, and Tree burrs in 6mm or 12mm head diameter (standard 6mm Shank)  TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life. All burrs are 100% braze tested for strength and safety. 6mm shank. Choose from 6mm or 12mm head.  

HMT 402150-0060 Uncoated TCT Burr 6mm Flame 6mm Shank

HMT TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life. These burrs are recommended for use with high-speed die grinders or straight grinders All burrs are 100% braze tested for strength and safety.  6mm head. 6mm shank.

HMT 402160 Uncoated TCT Burr Tree

GoldMax™ TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life.  These burrs are recommended for use with high-speed die grinders or straight grinders All burrs are 100% braze tested for strength and safety. Tree burr. 6mm shank. Choose from 6mm or 12mm head.

HMT 402240 Ali CutTCT Burr Cylinder End Cut

AliCut TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life. Designed for use on Aluminium and other non-ferrous metals. All burrs are 100% braze tested for strength and safety. 6mm shank. Choose from 6mm or 12mm head. Cylinder end cut burr.

HMT 402210 Ali CutTCT Burr Ball

AliCut TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life. Designed for use on Aluminium and other non-ferrous metals. All burrs are 100% braze tested for strength and safety. 6mm shank. Ball burr. Choose from 6mm or 12mm head.

HMT 402120 Uncoated TCT Burr Ball Nosed Cylinder

HMT TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life. All burrs are 100% braze tested for strength and safety. Ball nose clyinder burrs. 6mm shank. Choose from 6mm or 12mm head.

HMT 402110 Uncoated TCT Burr Ball

HMT TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life. The HP2 Cut gives a smooth operation with short chips. These burrs are recommended for use with high-speed die grinders or straight grinders All burrs are 100% braze tested for strength and safety. Ball burr. 6mm shank. Choose from 6mm or 12mm head.  

HMT 402140 Uncoated TCT Burr Cylinder End Cut

HMT TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life. The HP2 Cut gives a smooth operation with short chips. These burrs are recommended for use with high-speed die grinders or straight grinders All burrs are 100% braze tested for strength and safety. Cylinder end cut burr. 6mm shank. Choose from 6mm or 12mm head.  

HMT HSS SilverMax Long Series Broach Cutter

107010 silver max hss 50mm rota broach cutters fit any standard mag drill m2 hss tool steel

HMT 107020P-0500 HSS Rota Broach Cutter Pilot Pin Short Series 12-50mm Pack of 2

107020P-0500 Silvermax rota broach pilot pin short reach pack of 2

HMT 107010P-0500 Rota Broach Pilot Pin Long Series Pack Of 2

107010p-0500 50mm long series pilot pins 2 in pack for use with the 107010 range of cutters

HMT 107020 Silver Max Short Series HSS Mag Cutter Rota Broach Bit 25mm Long

107020 series 25mm short series rotabroach cutter used on metal up to 25mm thick precision ground from high grade m2 hss tool steel fit any standard mag drill

HMT 107020-Set HSS SilverMax Short Reach Rota Broach Cutter Set 14,18,22mm + Pilot Pin

107020-SET 14,18,22mm short reach cutters pilot pin 25mm long cutters fit any standard mag drill m2 hss tool steel

HMT 107020-5Set 5 Piece Short Reach Rota Broach Set 12,14,18,22,26mm + Pilots

107020-5set 12,14,18,22,26mm cutters 2 x pilot pins 25mm in length m2 hss tool steel for any standard mag drill

HMT 107010-Set HSS Silver Max Rota Broach Cutter Set 14,18,22 + Pilots

107010-SET - Contains 14,18,22mm x 50mm long cutters 2 x pilot pins silvermax hss cutters fit any standard mag drill

HMT 107010-5SET HSS Long Series 50mm Silver Max Rota Broach Cutter Set 12,14,18,22,26mm

107010-5SET 12,14,18,22+ 26mm cutter 50mm long 2 x pilot pins silver max hss cutter fit any standard magnetic drill

HMT 107020-SS1 Short Series Rota Broach Cutter Starter Set 25mm Long

107020-ss1 contains silver max hss cutters 14,18,20,22,24,26mm weldon twist shank drills 6,8,10,10.2,12mm pilot pins 30mm goldmax 90" countersink bit

HMT 107010-SS1 Long Series Rota Broach Cutter Starter Set 50mm Long

107010-SS1 silver max hss cutters 14,18,20,22,24,26mm x 50mm long weldon twist shank drills 6,8,10,10.2,12mm pilot pins 30mm goldmax 90" countersink bit

HMT 805046-020 RTV36-18 18v Cordless Magnetic Drill Low Profile 2 x 9.0ah Batteries + Charger

805046-020 18v mag drill 2 x 9.0ah batteries, charger and case 12-36mm cutter size 40mm stroke capacity 11.3kg weight 650kg magnetic force 270-430rpm no load speed width 140mm height 177mm  

HMT 308050-0040 VersaDrive ImpactaTap 1/2" - 13 UNC

15X Faster than Hand Tapping VersaDrive® ImpactaTaps are the first range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand. With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating

HMT 103017 B16 to 3/4" Weldon Shank Chuck Adapter

HMT 103017 Weldon 19.05mm fitting for all standard magnet drills

HMT 103070 Heavy Duty Keyed Magnet Drill Chuck 1-13mm Capacity

HMT 103070 Heavy Duty Keyed Magnet Drill Chuck 1-13mm Capacity Takes drill bits up to 13mm shank

HMT 111140-012A 1/2" VersaDrive MAX Impact Adapter

HMT 111140-012A 1/2" VersaDrive MAX Impact Adapter Length: 65mm Width: 35mm • Use with the highest torque drive tools • Impact adapters are made to a trusted heavy-duty design with pull forward locking collar • Impact adapters supplied with retention ring & pin-Ideal for steel erection & bridge work

HMT MA24-ETOP2-DRILL STAKIT ETOP2 Versadrive Impact Drilling Kit

HMT MA24-ETOP2-DRILL ETOP2 Impact Drilling Kit Contains;  x VersaDrive TurboTip Impact Drill Bits (6, 8, 10 and 12mm)  x VersaDrive turbotip Step Drills (20, 25 and 32mm) 2 x VersaDrive turbotip impacta step cutters 8-16, 14-22, 18-26mm 1 x VersaDrive Rapid-Lock 1/2" Impact Wrench Adapter 1 x STAKIT ETOP2 Half Top Case

HMT 103010-KIT 4 Litre Cordless Coolant Pump Kit

HMT 103010-KIT 4 Litre Cordless Coolant Pump Kit Length - 320mm (Exc. dispensing arm) Width - 155mm Height - 260mm Weight - 950g (Empty) Battery - 2Ah Battery Life - Up to 3hrs

HMT VersaDrive ImpactaTap M18 x 2.5mm

m18 x 2.50 Hex shank suitable for drills up to 10mm tap size can be driven by impact wrenches and mag drills. Adapters shown in images are sold separately       

HMT V36-18 18v Cordless Magnet Drill Mag Drill Body Only 805036-010

HMT JM24-805036-010 V36-18 Cordless Magnet Drill Body Only Supplied with: Rapid-Lock VersaDrive AdapterGuardCardboard Carton Cutter Size Range: 12 - 36mm TCTMax Cutter Length: 110mmTwist Drill Capacity: 1 - 13mmCountersinking: 10 - 25mmReaming: N/ATapping: N/ALength: 325mmWidth (Inc Handles): 184mmHeight (Min-Max): 275 - 415mmStroke: 140mmWeight: 9.8kgMagnet (L x W): 157 x 85mmMagnetic Adhesion: 650kgsMotor Power: 1000wTotal Power: 1000wSpeed RPM (No Load): 530Spindle: 3/4" WeldonArbor: Integral 3/4" WeldonCoolant System: Optional ExtraWarranty: 1 YearBattery Capacity: 18v 5ah/6ah Li-ion

HMT 209015-SET16 Stakit ETOP2 Turbotip Impact Drill Bit

HMT JM24-209015-SET16 16 Piece TurboTip Impact Drill Bit Set Includes 6, 6.8, 7, 8, 8.5, 9, 10, 1.5, 11, 12, 13, 14, 16, 18 and 22mm Supplied in a STAKIT ETOP2 half top case.

HMT 601036-0320 32mm ULTRA Coated Weldon Shank TCT Countersink - 90°

HMT 601036-0320 32mm ULTRA Coated Weldon Shank TCT Countersink - 90° 32mm Max Diameter 72mm Total Length 19.05mm (3/4") Weldon shank to fit all standard magnet drills

HMT 101035 VersaDrive TCT HoleCutter Extra Long 100mm Deep

Fit all drill chucks. 10x longer than the standard cutters. Impact rated. Quick change system with versadrive adaptors. 120mm reach with 100mm depth of cut. Tungsten carbide teeth. Use in standard 1/2" drill chuck or use with magnet drill adapter.

HMT 501030-0210 21mm Impact Power Tool Reamer VersaDrive

501030-0210 21mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills  

HMT 2040EX-SET1 Versadrive HD Impact Stud Extractors M6-M20 8 Piece

HMT 2040EX-SET1 Versadrive HD Impact Stud Extractors M6-20 8 Piece

HMT 2040EX-SET2 Versadrive HD Impact Stud Extractors M5-M26 12 Piece

HMT 2040EX-SET2 Versadrive HD Impact Stud Extractors M5-26 Includes VersaDrive 1/2" Impact Wrench Adapter and VersaDrive Magnet Drill Adapter 12 Piece

HMT 115810-SET VersaDrive ImpactaDie Kit M6-M12

HMT 115810-SET • Guided threading for straight & true results • Use with Impact Wrenches • Create external threads up to 50mm long • Clean out existing external threads • Impact Chipbreaker action for effective swarf evacuation • Use on Impact to prevent dangerous kickback • VersaDrive patented shank and modular adapters provide unbeatable jobsite flexibility • Impact-rated due to dual hardening process - allows up to 15X faster speed than traditional methods For use creating or cleaning out external threads M6 - M12 Includes ImpactaBurr chamfer tool designed to chamfer the outside edge of tube or round bar Set contents: - ImpactaDie holder - Guide Collar - Flush Collar - M6/M8/M10/M12 Hex Die Nuts - M6/M8/M10/M12 Guides - ImpactaBurr Chamfer Tool

HMT 111027-014A VersaDrive 1/4" Impact Driver Adapter

HMT 111027-014A Versadrive 1/4" Impact Driver Adapter Rapid Lock Single Handed Loading Quick release collar for swift tool changeover. 

HMT VersaDrive 130mm Rapid-Lock Extension Arbor

130mm Extension arbor for rotary drills. Extends the working reach of all VersaDrive tools Rapid-Lock. Single handed loading action and can also be used in combination with other VersaDrive adapters. Hex shank for non-slip use in any drill chuck. Improved Quick Release collar that prevents accidental tool release caused by vibrations or contact with the workpiece.

HMT 505030-0030 VersaDrive Impact Step Drill Bit 1/4-1 3/8" (1/8"Increments)

Featuring a spiral flute design with self-starting drill tip for fast, smooth drilling with a rotary drill or impact wrench. Hex shank suitable for use in any standard 1/2” drill chuck for cordless or Pistol Drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. Suitable for stainless and harder materials if used at low RPM. Use appropriate lubrication and correct RPM to achieve long tool life. Specially hardened for use with Impact tools. Precision ground flutes with easy chip clearance.

HMT 14mm VersaDrive Blacksmith Cobalt Drill Bit

209010-0140 14mm any standard 1/2" drill chuck for cordless or pistol drill use 135 Split Point for easy starting and high accuracy 8% Cobalt for long life and endurance in structural steel and hard metals GoldMax Low Friction Titanium Coating to stop heat burn out    

HMT STC-ETOP4-IMPACT VersaDrive STAKIT ETOP4 Impact Kit

HMTSTC-ETOP4-IMPACT Contains; 4 x VersaDrive TurboTip Impact Drill Bits; 6.8mm 8.5, 10.5, & 14mm4 x VersaDrive ImpactaTaps; M8, M10, M12 & M163 X VersaDrive Impact Reamers; 14, 18 & 22mm3 x VersaDrive ImpactaStep Cutters; 8-16mm 14-22mm & 18-26mm 3 x step drill bits 4-12mm, 4-22mm & 4-30mm 1 x VersaDrive Rapid-Lock 1/2" Impact Wrench Adapter 1 x VersaDrive STAKIT Full Top Case1 x Small 8pc Insert Foams1 x Large 6pc Insert Foam3 x Adater Foam Inserts

HMT STC-ETOP2-IMPACT VersaDrive STAKIT ETOP2 Impact Kit

HMTSTC-ETOP2-IMPACT15 Piece Impact Kit Contains; 4 x VersaDrive TurboTip Impact Drill Bit Bits; 6.8, 8.5, 10.5 & 14mm4 x VersaDrive ImpactaTaps; M8, M10, M12 & M163 x VersaDrive ImpactaStep Cutters; 8-16mm, 14-22mm & 18-26mm 1 x VersaDrive Rapid-Lock 1/2" Impact Wrench Adapter 1 x VersaDrive 130mm Extension Arbor1 x VersaDrive STAKIT Half Top Case

HMT VersaDrive MAX 3/4" Impact Adapter

The VersaDrive MAX Impact Adapter converts high torque, portable impact wrenches for use with the VersaDrive MAX system. The standard VersaDrive Shank measures 11mm (AF) whilst the heavy-duty VersaDrive MAX shank is 20mm (AF) meaning it can be used in far higher torque applications. The VersaDrive MAX adapter accommodates the larger shank and can withstand the highest levels of torque.

HMT 501030-0240 24mm Impact Power Tool Reamer VersaDrive

501030-0240 24mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.  

HMT VersaDrive Rapid-Lock SDS+ Adapter

This upgraded SDS+ VersaDrive adapter features: New Rapid-Lock, single handed loading action Improved Quick Release collar that prevents accidental tool release caused by vibrations or contact with the workpiece Knurled collar - ultimate grip in greasy or damp conditions High quality, Heavy Duty steel components Converts all standard SDS+ Rotary Hammer Drills for use with VersaDrive system (In rotary mode)

HMT GoldMax TCT Burr 4 Pc Set 6mm, Flame, 4020-SET2

4020-SET2 1 x Flame 402050-0060 1 x Cylinder 402040-0060 1 x ball nose 402020-0060 1 x Tree burrs 402060-0060 6mm shanks 6mm Head Titanium Coating for long life and cooler cut

HMT VSD-TMKIT VersaDrive Tradesman's Kit

HMT Versadrive Tradesman's KitVSD-TMKITIncludes;   VersaDrive Step Drill 4-12mmVersaDrive Step Drill 4-22mm VersaDrive TCT Holecutter 20mmVersaDrive TCT Holecutter 25mmVersaDrive TCT Holecutter 32mmVersadrive ImpactaStep Cutter 8-16mmVersadrive 1/4" Rapid-Lock Impact Driver AdapterVersadrive 130mm Rapid-Lock Extension Arbor

HMT VersaDrive STAKIT SiteCart

HMTSTC-SITECARTL X W X H - 600mm x 460mm x 765mm

HMT 501020-0360 36 x 200mm Impactamag Impact Reamer

501020-0360 36mm x 200mm impact reamer Ideal for steel erection & bridge workUsed for Network Rail bridge refurbishment and strengtheningIdeal for modifying & enlarging holesSecured directly to the Impact WrenchCan be used with any standard Magnet DrillUnique 6 flute design for faster, smoother cutPrepare holes ready for installation of TCB & friction grip bolts

HMT STC-EMID-MEIK STAKIT 31 Piece Site Installation Kit

HMT  STC-EMID-MEIK 31 Piece STAKIT Site Installation Kit - Metric Contains; 6 x Turbo 6, 6.35, 8, 10.5, 12 & 14mm 5 x HoleCutters 14, 17, 18, 20 & 22mm  2 x ImpactaStep 16 & 22mm 3 x DrillTaps M6, M8 & M10 3 x ImpactTaps M12, M16 & M20 4 x Reamers 12, 14, 18 & 22mm 1/4" Impact Driver Adapter 1/2" Impact Wrench Adapter Magnet Drill Adapter 130mm Extension 300mm Extension Supplied in STAKIT case.

HMT 505020-SET2 Versadrive Impact Step Drill Bit Set 4 Piece 12, 20, 30, 40mm

505020-SET2 12mm, 20mm, 30mm & 40mm versadrive 5mm drilling capacity 135° split point angle for easy starting and high accuracy Hardened for impact wrench use 8% cobalt for long life and endurance in structural steel and hard metals Adaptors shown in images are sold separately.

HMT 209015-SET2 VersaDrive TurboTip Impact Drill Bit Set 6, 7, 8, 9, 10, 11, 12mm

209015-SET2 6, 7, 8, 9, 10, 11, and 12mm bits in box Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT Drill Bit Set 209015-SET3 VersaDrive TurboTip Impact Bit Set 6.8, 8, 8.5, 10, 10.5, 12, 14mm

209015-SET3 6.8, 8, 8.5, 10, 10.5, 12, and 14mm bits in box Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately. 

HMT 111120-034A VersaDrive 3/4" Heavy Duty Quick Change Impact Wrench Adapter

111120-034A 3/4 drive 60mm long pull forward release reduces the risk of tool loosening during use

HMT CarbideMax 80 Broach Cutter Pilot Pin 2 Pack

HMT 108010P-0170 2 Pack  CarbideMax 80 Broach Cutter Pilot Pin 12-17mm CarbideMax TCT Magnet Broach Cutter

HMT V125T Versadrive Magnetic Drill 110v or 240v

Cutter Range 12-125mm Max Cutter Capacity 125mm TCT Twist Drill Capacity 32mm Max Tap Capacity M32 Max Countersinking 65mm Dimensions L 345mm, W 240mm, H 450-750mm 280mm stroke25kg weight Magnet L 220mm, W 115mm Magnetic Adhesion 2200kgs Motor Power 1800w, Total Power 1900w. Speed RPM (No Load) 60 - 140 / 100-220 / 140-310 / 210-390 3/4 Weldon fitting.

HMT STC-TOP-VCM01 VersaDrive STAKIT Top Toolcase - Rotary Kit

HMT VersaDrive STAKIT Top Toolcase Rotary Kit STC-TOP-VCM01 Kit Includes; 108030 CarbideMax Broach Cutters 12, 14, 18, 22, 26mm4 Pilot Pins101030 VersaDrive HoleCutters 14, 16, 18, 20, 22, 26mm

HMT 701010-0002 Speedlube Drilling & Tapping Spray Aerosol 500ml

High performance foaming lubricant for a range of metal drilling applications on a range of materials. 500ml can.

HMT V35 Versadrive Magnetic Drill Plus Stakit Case

Cutter range 12-35mm. Max cutter length 110mm. Twist drill capacity 12mm. Countersinking 25mm. Dimensions l 220mm, w 173mm, h 305-445mm. 140mm stroke. 9.5kg weight. Magnetic adhesion 1000kg. Motor power 850w, total power 900w. 3/4 Weldon fitting.

HMT CarbideMax 55 TCT Magnet Broach Cutter

55 Series will broach up to 50mm thickness of metal TCT Broach cutters are tipped with individually brazed cutting teeth of the highest quality carbide

HMT 6x16mm GoldMax TCT Burr Ball Nosed Cylinder

Provides a precision cut, long life and high control. Titanium coating for a long life. Recommended for use with high speed die grinders and straight grinders. 6x16mm ball nose burr. 60mm length. standard 6mm shank

HMT 402010-0060 6 x 6mm GoldMax TCT Ball Burr

Provides a precision cut, long life and high control. Titanium coating for a long life. Recommended for use with high speed die grinders and straight grinders. 6 x 6mm tct burr. 50mm length. standard 6mm shank. 

HMT 402010-0120 12 x 10mm GoldMax TCT Ball Burr 6mm Shank

Provides a precision cut, long life and high control. Titanium coating for a long life. Recommended for use with high speed die grinders and straight grinders. 12 x 10mm tct burr. 55mm length. standard 6mm shank

HMT 6 x 16mm GoldMax TCT Tree Burr

Provides a precision cut, long life and high control. Titanium coating for a long life. Recommended for use with high speed die grinders and straight grinders. 6x16mm tree burr. 60mm length. standard 6mm shank

HMT 12x25mm GoldMax TCT Tree Burr

Provides a precision cut, long life and high control. Titanium coating for a long life. Recommended for use with high speed die grinders and straight grinders. 12x25 tree burr. 69mm length. standard 6mm shank

HMT 209015-0200 20mm VersaDrive TurboTip Impact Drill Bit

20mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT VersaDrive Countersinks

Recommended for use with rotary drills, mag drills and pillar drills. Features fully grounded flutes and a titanium coating to help reduce wear and blunting.  Patented non slip hex shank fur use in any standard 1/2” drill chuck. Adapters available to use in mag drill 111035-01, versadrive impact adapters 111026-014A and 111130-012A, sds+ adapter 112010-01 extension 300mm 111010-0002. Optimum life and performance when used with rotary pistol drills or drill presses. Up to 16.5mm can be used with impact wrench and impact drivers. Can be used on stainless steel at reduced RPM.

HMT M24 x 3.0mm VersaDrive ImpactaTap Metric Coarse Thread

m24 x 3.0mm  Hex shank suitable for drills up to 10mm tap size can be driven by impact wrenches and mag drills Adapters shown in images are sold separately 

HMT 111035-01 Versa Drive Rapid-Lock Weldon Adapter

111035-01 19.05mm/3/4" Weldon Magnet Drill Shank New Rapid-Lock, single handed loading Drill bits shown in images are sold separately  

HMT Countersink Drill Bit Set, 12.4, 16.5, 20.5, 25, 31mm 603060-5SET

Recommended for use with rotary drills, mag drills and pillar drills. Features fully grounded flutes and a titanium coating to help reduce wear and blunting.  Patented non slip hex shank fur use in any standard 1/2” drill chuck. Adapters available to use in mag drill 111035-01, versadrive impact adapters 111026-014A and 111130-012A, sds+ adapter 112010-01 extension 300mm 111010-0002. Optimum life and performance when used with rotary pistol drills or drill presses. Up to 16.5mm can be used with impact wrench and impact drivers. Can be used on stainless steel at reduced RPM.

HMT 501030-0080 8mm Impact Power Tool Reamer VersaDrive

8mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT V85T Versadrive Magnetic Drill 110v or 240v

Cutter Range 12-85mm Max Cutter Capacity 85mm TCT Twist Drill Capacity 27mm Max Tap Capacity M27 Max Countersinking 55mm Dimensions L 325mm, W 240mm, H 425-645mm 220mm stroke20.5kg weight Magnet L 200mm, W 100mm Magnetic Adhesion 1750kgs Motor Power 1800w, Total Power 1920w. Speed RPM (No Load) 60 - 140 / 200 - 470 3/4 Weldon fitting.

HMT 209015-0160 16mm VersaDrive TurboTip Impact Drill Bit

16mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT GoldMax HSS Weldon Countersink 90 Degrees

Available in 30, &0 and 55mm. Specially coated for increased tool life. 19.05mm weldon shank for use with all standard mag drills.

HMT 209015-SET4 VersaDrive TurboTip Impact Drill Bit Set 6, 8, 10, 12, 14, 18 & 22mm

Contains 6,8,10,12,14,18 and 22mm. Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 209015-0180 18mm VersaDrive TurboTip Impact Drill Bit

18mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 101030-SET2 VersaDrive TCT HoleCutter 5 Piece Set 14, 17, 18, 21, 22mm

5 piece set containing 14, 17, 18, 21, 22mm   tct hole cutter Use in any standard drill chuck Massive 70mm reach with 55mm depth of cut 10x greater than standard bi-metal "starrett" type holesaws Rated for steel, structural steels, stainless steel (inox), Aluminium, Cast Iron, Brass, Copper, Fibreglass, composite and sandwich materials, plastics, and wood

HMT V100T Versadrive Magnetic Drill 110v or 240v

Cutter Range 12-100mm Max Cutter Capacity 100mm TCT Twist Drill Capacity 32mm Max Tap Capacity M30 Max Countersinking 55mm Dimensions L 345mm, W 240mm, H 450-730mm 280mm stroke24.5kg weight Magnet L 220mm, W 115mm Magnetic Adhesion 2200kgs Motor Power 1800w, Total Power 1900w. Speed RPM (No Load) 60 - 140 / 200 - 470 3/4 Weldon fitting.

HMT 501030-SET VersaDrive Impact Reamer Set, 12, 14, 18, 22, 26mm

Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Supplied in plastic case Contains the following sizes 12-14-18-22-26mm. Adapters shown in images are sold separately.

HMT CarbideMax 55 Broach Cutter Pilot Pin 6.34x103mm

CarbideMax 55 Broach Cutter Pilot Pin 6.34x103mm Pack of 2 For 12-17mm carbide max 55 cutters

HMT M20 x 2.50 VersaDrive ImpactaTap Metric Coarse Thread

m20 x 2.50 Hex shank suitable for drills up to 10mm tap size can be driven by impact wrenches and mag drills. Adapters shown in images are sold separately   

HMT 308010-0300 M30 x 3.50mm VersaDrive ImpactaTap Metric Coarse Thread

m30 x3.50mm Hex shank suitable for drills up to 10mm tap size can be driven by impact wrenches and mag drills, Adapters shown in images are sold separately.

HMT 101030P-0130 Pilot Drill for 12 & 13mm VersaDrive Hole Cutters

Supplied in a pack of 2. For 12 and 13mm holecutters.  Without ejection spring.

HMT 328015-SET1 VersaDrive TurboTip & ImpactaTap Combi Set

HMT 328015-SET1 VersaDrive TurboTip & ImpactaTap Combi SetContains; 6.8, 8.5m 10.5 and 14mm TurboTips M8, M10, M12 and M16 ImpactaTaps

HMT 101030P-0001 VersaDrive TCT Hole Cutter Pilot Drills

Hole cutter pilot drill for 14 - 80mm hole cutters. Pack of 2. Supplied with ejection spring.

HMT VersaDrive TCT HoleCutter Set 14mm, 18mm, 22mm 101030-SET1

101030-SET1 14mm, 18mm, 22mm, Use in any standard drill chuck Massive 70mm reach with 55mm depth of cut ideal for drilling channel, box section and thick steel 10x greater than standard bi-metal "starrett" type hole saws  

HMT 301125-SET1 VersaDrive Combination Drill-Tap Set 5 Piece M5 M6 M8 M10 M12

301125-SET1 5 Piece set M5, M6, M8, M10, M12 Ground flute twist drill creates the perfect tapping hole Safer tapping with minimal kickback GoldMax low-friction titanium coating to stop heat burn out High-strength, non-slip shank design

HMT 505020-SET1 VersaDrive Step Drill Bit Set 3 Piece 12mm 20mm 30mm

505020-SET1 12mm, 20mm & 30mm VersaDrive 5mm drilling capacity 135° split point angle for easy starting and high accuracy Hardened for impact wrench use 8% cobalt for long life and endurance in structural steel and hard metals  

HMT 108030-SET CarbideMax 40 TCT Broach Cutter 3 Piece Set 14,18,22mm 2 Pilots

108030-SET 14mm, 18mm, 22mm 2 x pilots 10x longer life & 64% faster cut than hss cutters tipped with brazed cutting teeth

HMT 501030-0260 26mm Impact Power Tool Reamer VersaDrive

501030-0260 26mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT 505020-0120 4-12mm VersaDrive Impact Step Drill Bit

505020-0120 4-12mm step drill bit 5mm thick drilling capacity ground flutes with easy chip clearance 135° split point angle for easy starting & accuracy Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills. Adaptors shown in images are sold separately.

HMT 505020-0220 4-22mm VersaDrive Impact Step Drill Bit

505020-0220 4-22mm step drill bit 5mm thick drilling capacity ground flutes with easy chip clearance 135° split point angle for easy starting & accuracy Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills. Adaptors shown in photos are not included

HMT 505020-0300 4-30mm VersaDrive Impact Step Drill Bit

505020-0300 4-30mm step drill bit 5mm thick drilling capacity ground flutes with easy chip clearance 135° split point angle for easy starting & accuracy Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills. Adaptors shown in images are sold separately.

HMT 505020-0400 6-40mm VersaDrive Impact Step Drill Bit

505020-0400 6-40mm step drill bit 5mm thick drilling capacity ground flutes with easy chip clearance 135° split point angle for easy starting & accuracy Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills.

HMT AeroPaste Drilling Lubricant Spray 500ml 701010-0001

701010-0001 500ml lubricant spray for hole broaching, tapping, reaming & drilling applications minimises repainting or galvanising issues caused by conventional soluble lubricants and reduces mess and slipping hazards.

HMT BioCut Blue Neat Metal Cutting Oil

704010 500ml or 5litre please select from drop down menu   oil cutting fluid Water-soluble fluid Synthetic based, chlorine free, with zero mineral oils  

HMT 704030-0001 BioCut Drilling & Tapping Paste 250G Tin

704030-0001 250g tin paste Suitable for use with all grades of steel including Stainless Steel & Aluminium Chlorine Free for safer use

HMT 4020-SET1 GoldMax TCT 4 Piece Burr Set 12mm Head

4020-SET1 1 x Flame 402050-0120 1 x Cylinder 405040-0120 1 x ball nose 402020-0120 1 x Tree burrs 402060-0120 6mm shanks 12mm Head Titanium Coating for long life and cooler cut

HMT 10mm Versadrive Impact Power Tool Reamer 501030-0100

501030-0100 10mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT 12mm VersaDrive Impact Power Tool Reamer 501030-0120

501030-0120 12mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT 14mm Impact Power Tool Reamer VersaDrive 501030-0140

501030-0140 14mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT 501030-0200 20mm Impact Power Tool Reamer VersaDrive

501030-0200 20mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT 501030-0160 16mm Impact Power Tool Reamer VersaDrive

501030-0160 16mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adapters shown in images are sold separately.

HMT 501030-0180 18mm Impact Power Tool Reamer VersaDrive

501030-0180 18mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT 501030-0220 22mm Impact Power Tool Reamer VersaDrive

501030-0220 22mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT Versadrive Impact Reamer Set 3 Piece 14, 18, 22mm 501030-3SET

501030-3SET 14, 18, 22mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adapters shown in images are sold separately. 

HMT 308010-SET1 VersaDrive ImpactaTap 5 Piece Tap Set M6 M8 M10 M12 M16

308010-SET1 m6. m8, m10, m12, m16 Hex shank suitable for drills upto 10mm tap size can be driven by impact wrenches and impact drivers

HMT M10 x 1.5mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0100 m10 x 1.5mm Hex shank suitable for drills upto 10mm tap size can be driven by impact wrenches and impact drivers Adapters shown in images are sold separately 

HMT M12 x 1.75mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0120 m12 x 1.75mm Hex shank suitable for drills upto 10mm tap size can be driven by impact wrenches and impact drivers, Adapters shown in images are sold separately 

HMT M14 x 2.0mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0140 m14 x 2.0mm Hex shank suitable for drills upto 10mm tap size can be driven by impact wrenches and impact drivers, Adapters shown in images are sold separately 

HMT M16 x 2.0mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0160 m16 x 2.0mm Hex shank suitable for drills upto 10mm tap size can be driven by impact wrenches and impact drivers Adapters shown in images are sold separately 

HMT M6 X 1 VersaDrive Spiral Flute Combi Drill-Tap

301125-0060 m6 x 1 Fast Tapping with Minimal Kickback High-Grade Tool Steel for high accuracy & long life Ground Flute Twist Drill Creates the perfect Tapping Hole High Strength, Non-slip shank design Correct RPM is critical for good performance on larger drill taps For impact wrench use, pilot drilling the hole with a separate drill bit is necessary

HMT M8 x 1.25 VersaDrive Spiral Flute Combi Drill-Tap

301125-0080 m8 x 1.25 Fast Tapping with Minimal Kickback High-Grade Tool Steel for high accuracy & long life Ground Flute Twist Drill Creates the perfect Tapping Hole High Strength, Non-slip shank design Correct RPM is critical for good performance on larger drill taps For impact wrench use, pilot drilling the hole with a separate drill bit is necessary

HMT M10 X 1.50 VersaDrive Spiral Flute Combi Drill-Tap

301125-0100 m10 x 1.50 Fast Tapping with Minimal Kickback High-Grade Tool Steel for high accuracy & long life Ground Flute Twist Drill Creates the perfect Tapping Hole High Strength, Non-slip shank design Correct RPM is critical for good performance on larger drill taps For impact wrench use, pilot drilling the hole with a separate drill bit is necessary

HMT M12 x 1.75 VersaDrive Spiral Flute Combi Drill-Tap

301125-0120 m12 x 1.75 Fast Tapping with Minimal Kickback High-Grade Tool Steel for high accuracy & long life Ground Flute Twist Drill Creates the perfect Tapping Hole High Strength, Non-slip shank design Correct RPM is critical for good performance on larger drill taps For impact wrench use, pilot drilling the hole with a separate drill bit is necessary

HMT M5 x 0.8mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0050 m5 x 0.8mm Hex shank suitable for drills up to 10mm tap size can be driven by impact wrenches and impact drivers,  Adapters shown in images are sold separately 

HMT M6 x 1.0mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0060 m6 x 1.0mm Hex shank suitable for drills up to 10mm tap size can be driven by impact wrenches and impact drivers Adapters shown in images are sold separately 

HMT M8 x 1.25mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0080 m8 x 1.25mm Hex shank suitable for drills upto 10mm tap size can be driven by impact wrenches and impact drivers Adapters shown in images are sold separately 

HMT 209015-0110 11mm VersaDrive TurboTip Impact Drill Bit

209015-0110 11mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 209015-0120 12mm VersaDrive TurboTip Impact Drill Bit

209015-0120 12mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Adapters shown in images are sold separately.

HMT 209015-0140 14mm VersaDrive TurboTip Impact Drill Bit

209015-0140 14mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately

HMT 209015-SET1 VersaDrive TurboTip Impact Drill Bit Set 6, 8, 10, 12mm

209015-SET1 6, 8, 10, and 12mm bits in box Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life

HMT M3 X 0.50 VersaDrive Spiral Flute Metal Combi Drill-Tap

301125-0030 m3 x 0.50 Fast Tapping with Minimal Kickback High-Grade Tool Steel for high accuracy & long life Ground Flute Twist Drill Creates the perfect Tapping Hole High Strength, Non-slip shank design Correct RPM is critical for good performance on larger drill taps For impact wrench use, pilot drilling the hole with a separate drill bit is necessary  

HMT M4 X 0.70 VersaDrive Spiral Flute Combi Drill-Tap

301125-0040 m4 x 0.70 Fast Tapping with Minimal Kickback High-Grade Tool Steel for high accuracy & long life Ground Flute Twist Drill Creates the perfect Tapping Hole High Strength, Non-slip shank design Correct RPM is critical for good performance on larger drill taps For impact wrench use, pilot drilling the hole with a separate drill bit is necessary

HMT M5 X 0.80 VersaDrive Spiral Flute Combi Drill-Tap

301125-0050 m5 x 0.80 Fast Tapping with Minimal Kickback High-Grade Tool Steel for high accuracy & long life Ground Flute Twist Drill Creates the perfect Tapping Hole High Strength, Non-slip shank design Correct RPM is critical for good performance on larger drill taps For impact wrench use, pilot drilling the hole with a separate drill bit is necessary

HMT 13mm VersaDrive HSS-Cobalt Drill Bit

209010-0130 13mm any standard 1/2" drill chuck for cordless or pistol drill use 135 Split Point for easy starting and high accuracy 8% Cobalt for long life and endurance in structural steel and hard metals GoldMax Low Friction Titanium Coating to stop heat burn out

HMT 209015-0060 6mm VersaDrive TurboTip Impact Drill Bit

209015-0060 6mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 209015-0068 6.8mm VersaDrive TurboTip Impact Drill Bit

209015-0068 6.8mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life

HMT 209015-0070 7.0mm VersaDrive TurboTip Impact Drill Bit

209015-0070 7.00mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 209015-0080 8.0mm VersaDrive TurboTip Impact Drill Bit

209015-0080 8mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 209015-0085 8.5mm VersaDrive TurboTip Impact Drill Bit

209015-0085 8.5mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 209015-0090 9.0mm VersaDrive TurboTip Impact Drill Bit

209015-0090 9mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 209015-0100 10mm VersaDrive TurboTip Impact Drill Bit

209015-0100 10mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 209015-0105 10.5mm VersaDrive TurboTip Impact Drill Bit

209015-0105 10.5mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Adapters shown in images are sold separately.

HMT 9.5mm VersaDrive HSS-Cobalt Drill Bit

209010-0095 9.5mm any standard 1/2" drill chuck for cordless or pistol drill use 135 Split Point for easy starting and high accuracy 8% Cobalt for long life and endurance in structural steel and hard metals GoldMax Low Friction Titanium Coating to stop heat burn out

HMT 10.5mm VersaDrive HSS-Cobalt Drill Bit

209010-0105 10.5mm any standard 1/2" drill chuck for cordless or pistol drill use 135 Split Point for easy starting and high accuracy 8% Cobalt for long life and endurance in structural steel and hard metals GoldMax Low Friction Titanium Coating to stop heat burn out

HMT 11.5mm VersaDrive HSS-Cobalt Drill Bit

209010-0115 11.5mm any standard 1/2" drill chuck for cordless or pistol drill use 135 Split Point for easy starting and high accuracy 8% Cobalt for long life and endurance in structural steel and hard metals GoldMax Low Friction Titanium Coating to stop heat burn out

HMT 12mm VersaDrive HSS-Cobalt Drill Bit

209010-0120 12mm any standard 1/2" drill chuck for cordless or pistol drill use 135 Split Point for easy starting and high accuracy 8% Cobalt for long life and endurance in structural steel and hard metals GoldMax Low Friction Titanium Coating to stop heat burn out

HMT 6.5mm VersaDrive HSS-Cobalt Drill Bit

209010-0065 6.5mm any standard 1/2" drill chuck for cordless or pistol drill use 135 Split Point for easy starting and high accuracy 8% Cobalt for long life and endurance in structural steel and hard metals GoldMax Low Friction Titanium Coating to stop heat burn out

HMT 7.5mm VersaDrive HSS-Cobalt Drill Bit

209010-0075 7.5mm any standard 1/2" drill chuck for cordless or pistol drill use 135 Split Point for easy starting and high accuracy 8% Cobalt for long life and endurance in structural steel and hard metals GoldMax Low Friction Titanium Coating to stop heat burn out

HMT 8.0mm VersaDrive HSS-Cobalt Drill Bit

209010-0080 8.0mm any standard 1/2" drill chuck for cordless or pistol drill use 135 Split Point for easy starting and high accuracy 8% Cobalt for long life and endurance in structural steel and hard metals GoldMax Low Friction Titanium Coating to stop heat burn out

HMT 4.2mm VersaDrive HSS-Cobalt Drill Bit

209010-0042 4.2mm any standard 1/2" drill chuck for cordless or pistol drill use 135 Split Point for easy starting and high accuracy 8% Cobalt for long life and endurance in structural steel and hard metals GoldMax Low Friction Titanium Coating to stop heat burn out  

HMT 5.0mm VersaDrive HSS-Cobalt Drill Bit

209010-0050 5.0mm any standard 1/2" drill chuck for cordless or pistol drill use 135 Split Point for easy starting and high accuracy 8% Cobalt for long life and endurance in structural steel and hard metals GoldMax Low Friction Titanium Coating to stop heat burn out

HMT 5.5mm VersaDrive HSS-Cobalt Drill Bit

209010-0055 5.5mm any standard 1/2" drill chuck for cordless or pistol drill use 135 Split Point for easy starting and high accuracy 8% Cobalt for long life and endurance in structural steel and hard metals GoldMax Low Friction Titanium Coating to stop heat burn out

HMT CarbideMax 40 Broach Cutter Pilot Pin 12-17mm Cutters Pack of 2

108030P-0170 6.34 x 90mm pack of 2 to suit 12-17mm max40 cutters High quality, fully ground HSS pilot ejector pin for CarbideMax 40 TCT Broach cutters

HMT CarbideMax 40 Broach Cutter Pilot Pin 12-17mm Cutters Pk10

108030P-0170-p10 6.34 x 90mm pack of 10 to suit 12-17mm max40 cutters High quality, fully ground HSS pilot ejector pin for CarbideMax 40 TCT Broach cutters

HMT CarbideMax 40 Broach Cutter Pilot Pin 18-80mm Cutters Pack of 10

108030P-0600-p10 to suit 18-80mm cutters pack of 10 7.98 x 90mm High quality, fully ground HSS pilot ejector pin for CarbideMax 40 TCT Broach cutters

HMT 111130-012A VersaDrive 1/2" Drive Rapid-Lock Impact Wrench Adaptor

111130-012A 1/2 adaptor Converts standard 1/2” Impact Wrenches for use with VersaDrive Improved Quick Release collar that prevents accidental tool release caused by vibrations or contact with the work-piece Simply push any VersaDrive™ tool into the adapter which securely locks onto the shank

HMT CarbideMax 40 TCT Magnet Broach Cutter

CarbideMax™ 40 Series will broach up to 35mm thickness of metal CarbideMax™ TCT Broach cutters are tipped with individually brazed cutting teeth of the highest quality carbide  

HMT 103011-0001 Magnetic Swarf Lifter

103011-0001 swarf lifter 400mm length    

HMT 108020P-0600 CarbideMax 55 Broach Cutter Pilot Pin

108020P-0600 fully ground HSS pilot ejector pin for CarbideMax 55  

HMT 108020-SET CarbideMax 55 TCT Broach Cutter Set 14 18 22 2 x Pilots

108020-SET 14mm 18mm 22mm 2 x pilots upto 10x longer life 64% faster the hss cutters CarbideMax™ TCT Broach Cutters

HMT 55mm Deep VersaDrive TCT Hole Cutter

Hole Maker Technology (HMT) 101030  VersaDrive TCT Hole Cutter  55mm Deep Use in any standard drill chuck Massive 70mm reach with 55mm depth of cut 10x greater than standard bi-metal "starrett" type holesaws Rated for steel, structural steels, stainless steel (inox), Aluminium, Cast Iron, Brass, Copper, Fibreglass, composite and sandwich materials, plastics, and wood

HMT CarbideMax 150 Broach Cutter Pilot Pin 18-50mm 2 Pack

HMT 108045P-0600 Pack of 2 Pilot Pins for 108045 18-50mm CarbideMax TCT Magnet Broach Cutter 7.98 x 205mm Precision ground steel Bright Finish

HMT 111120-012A Versadrive Impact Wrench Adaptor 1/2" Drive

111120-012A 1/2 drive 55mm long pull forward release reduces the risk of tool loosening during use