HMT 701010-0002 Speedlube Drilling & Tapping Spray Aerosol 500ml

High performance foaming lubricant for a range of metal drilling applications on a range of materials. 500ml can.

HMT V35 Versadrive Magnetic Drill Plus Stakit Case

Cutter range 12-35mm. Max cutter length 110mm. Twist drill capacity 12mm. Countersinking 25mm. Dimensions l 220mm, w 173mm, h 305-445mm. 140mm stroke. 9.5kg weight. Magnetic adhesion 1000kg. Motor power 850w, total power 900w. 3/4 Weldon fitting.

HMT CarbideMax 55 TCT Magnet Broach Cutter

55 Series will broach up to 50mm thickness of metal TCT Broach cutters are tipped with individually brazed cutting teeth of the highest quality carbide

HMT 6x16mm GoldMax TCT Burr Ball Nosed Cylinder

Provides a precision cut, long life and high control. Titanium coating for a long life. Recommended for use with high speed die grinders and straight grinders. 6x16mm ball nose burr. 60mm length. standard 6mm shank

HMT 402010-0060 6 x 6mm GoldMax TCT Ball Burr

Provides a precision cut, long life and high control. Titanium coating for a long life. Recommended for use with high speed die grinders and straight grinders. 6 x 6mm tct burr. 50mm length. standard 6mm shank. 

HMT 402010-0120 12 x 10mm GoldMax TCT Ball Burr 6mm Shank

Provides a precision cut, long life and high control. Titanium coating for a long life. Recommended for use with high speed die grinders and straight grinders. 12 x 10mm tct burr. 55mm length. standard 6mm shank

HMT 6 x 16mm GoldMax TCT Tree Burr

Provides a precision cut, long life and high control. Titanium coating for a long life. Recommended for use with high speed die grinders and straight grinders. 6x16mm tree burr. 60mm length. standard 6mm shank

HMT 12x25mm GoldMax TCT Tree Burr

Provides a precision cut, long life and high control. Titanium coating for a long life. Recommended for use with high speed die grinders and straight grinders. 12x25 tree burr. 69mm length. standard 6mm shank

HMT 209015-0200 20mm VersaDrive TurboTip Impact Drill Bit

20mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT VersaDrive Countersinks

Recommended for use with rotary drills, mag drills and pillar drills. Features fully grounded flutes and a titanium coating to help reduce wear and blunting.  Patented non slip hex shank fur use in any standard 1/2” drill chuck. Adapters available to use in mag drill 111035-01, versadrive impact adapters 111026-014A and 111130-012A, sds+ adapter 112010-01 extension 300mm 111010-0002. Optimum life and performance when used with rotary pistol drills or drill presses. Up to 16.5mm can be used with impact wrench and impact drivers. Can be used on stainless steel at reduced RPM.

HMT M24 x 3.0mm VersaDrive ImpactaTap Metric Coarse Thread

m24 x 3.0mm  Hex shank suitable for drills up to 10mm tap size can be driven by impact wrenches and mag drills Adapters shown in images are sold separately 

HMT 501030-0080 8mm Impact Power Tool Reamer VersaDrive

8mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

Milwaukee 18v 115mm Fuel Angle Grinder M18FSAGV115XPDB-0 Cordless Variable Speed & Braking Grinder Paddle Switch

M18FSAGV115XPDB-0 18v bare unit in cardboard box variable speed paddle switch 2 second braking time 28mm cutting depth 115mm disc diameter 3500-8500 no load speed supplied with side handle, safety guard, flange, flange nut and spanner  

HMT 209015-0160 16mm VersaDrive TurboTip Impact Drill Bit

16mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT GoldMax HSS Weldon Countersink 90 Degrees

Available in 30, &0 and 55mm. Specially coated for increased tool life. 19.05mm weldon shank for use with all standard mag drills.

HMT 209015-SET4 VersaDrive TurboTip Impact Drill Bit Set 6, 8, 10, 12, 14, 18 & 22mm

Contains 6,8,10,12,14,18 and 22mm. Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 209015-0180 18mm VersaDrive TurboTip Impact Drill Bit

18mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 101030-SET2 VersaDrive TCT HoleCutter 5 Piece Set 14, 17, 18, 21, 22mm

5 piece set containing 14, 17, 18, 21, 22mm   tct hole cutter Use in any standard drill chuck Massive 70mm reach with 55mm depth of cut 10x greater than standard bi-metal "starrett" type holesaws Rated for steel, structural steels, stainless steel (inox), Aluminium, Cast Iron, Brass, Copper, Fibreglass, composite and sandwich materials, plastics, and wood

HMT 501030-SET VersaDrive Impact Reamer Set, 12, 14, 18, 22, 26mm

Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Supplied in plastic case Contains the following sizes 12-14-18-22-26mm. Adapters shown in images are sold separately.

HMT M20 x 2.50 VersaDrive ImpactaTap Metric Coarse Thread

m20 x 2.50 Hex shank suitable for drills up to 10mm tap size can be driven by impact wrenches and mag drills. Adapters shown in images are sold separately   

HMT 308010-0300 M30 x 3.50mm VersaDrive ImpactaTap Metric Coarse Thread

m30 x3.50mm Hex shank suitable for drills up to 10mm tap size can be driven by impact wrenches and mag drills, Adapters shown in images are sold separately.

HMT 101030P-0130 Pilot Drill for 12 & 13mm VersaDrive Hole Cutters

Supplied in a pack of 2. For 12 and 13mm holecutters.  Without ejection spring.

HMT 328015-SET1 VersaDrive TurboTip & ImpactaTap Combi Set

HMT 328015-SET1 VersaDrive TurboTip & ImpactaTap Combi SetContains; 6.8, 8.5m 10.5 and 14mm TurboTips M8, M10, M12 and M16 ImpactaTaps

HMT 101030P-0001 VersaDrive TCT Hole Cutter Pilot Drills

Hole cutter pilot drill for 14 - 80mm hole cutters. Pack of 2. Supplied with ejection spring.

HMT 301125-SET1 VersaDrive Combination Drill-Tap Set 5 Piece M5 M6 M8 M10 M12

301125-SET1 5 Piece set M5, M6, M8, M10, M12 Ground flute twist drill creates the perfect tapping hole Safer tapping with minimal kickback GoldMax low-friction titanium coating to stop heat burn out High-strength, non-slip shank design

HMT 505020-SET1 VersaDrive Step Drill Bit Set 3 Piece 12mm 20mm 30mm

505020-SET1 12mm, 20mm & 30mm VersaDrive 5mm drilling capacity 135° split point angle for easy starting and high accuracy Hardened for impact wrench use 8% cobalt for long life and endurance in structural steel and hard metals  

HMT 108030-SET CarbideMax 40 TCT Broach Cutter 3 Piece Set 14,18,22mm 2 Pilots

108030-SET 14mm, 18mm, 22mm 2 x pilots 10x longer life & 64% faster cut than hss cutters tipped with brazed cutting teeth

HMT 501030-0260 26mm Impact Power Tool Reamer VersaDrive

501030-0260 26mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT 505020-0120 4-12mm VersaDrive Impact Step Drill Bit

505020-0120 4-12mm step drill bit 5mm thick drilling capacity ground flutes with easy chip clearance 135° split point angle for easy starting & accuracy Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills. Adaptors shown in images are sold separately.

HMT 505020-0220 4-22mm VersaDrive Impact Step Drill Bit

505020-0220 4-22mm step drill bit 5mm thick drilling capacity ground flutes with easy chip clearance 135° split point angle for easy starting & accuracy Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills. Adaptors shown in photos are not included

HMT 505020-0300 4-30mm VersaDrive Impact Step Drill Bit

505020-0300 4-30mm step drill bit 5mm thick drilling capacity ground flutes with easy chip clearance 135° split point angle for easy starting & accuracy Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills. Adaptors shown in images are sold separately.

HMT 505020-0400 6-40mm VersaDrive Impact Step Drill Bit

505020-0400 6-40mm step drill bit 5mm thick drilling capacity ground flutes with easy chip clearance 135° split point angle for easy starting & accuracy Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills.

HMT AeroPaste Drilling Lubricant Spray 500ml 701010-0001

701010-0001 500ml lubricant spray for hole broaching, tapping, reaming & drilling applications minimises repainting or galvanising issues caused by conventional soluble lubricants and reduces mess and slipping hazards.

HMT BioCut Blue Neat Metal Cutting Oil

704010 500ml or 5litre please select from drop down menu   oil cutting fluid Water-soluble fluid Synthetic based, chlorine free, with zero mineral oils  

HMT 704030-0001 BioCut Drilling & Tapping Paste 250G Tin

704030-0001 250g tin paste Suitable for use with all grades of steel including Stainless Steel & Aluminium Chlorine Free for safer use

HMT 4020-SET1 GoldMax TCT 4 Piece Burr Set 12mm Head

4020-SET1 1 x Flame 402050-0120 1 x Cylinder 405040-0120 1 x ball nose 402020-0120 1 x Tree burrs 402060-0120 6mm shanks 12mm Head Titanium Coating for long life and cooler cut

HMT 10mm Versadrive Impact Power Tool Reamer 501030-0100

501030-0100 10mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT 14mm Impact Power Tool Reamer VersaDrive 501030-0140

501030-0140 14mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT 501030-0200 20mm Impact Power Tool Reamer VersaDrive

501030-0200 20mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT 501030-0160 16mm Impact Power Tool Reamer VersaDrive

501030-0160 16mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adapters shown in images are sold separately.

HMT 501030-0180 18mm Impact Power Tool Reamer VersaDrive

501030-0180 18mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT 501030-0220 22mm Impact Power Tool Reamer VersaDrive

501030-0220 22mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adaptors shown in images are sold separately.

HMT Versadrive Impact Reamer Set 3 Piece 14, 18, 22mm 501030-3SET

501030-3SET 14, 18, 22mm Precision 6-flute design for smooth cutting Safer reaming with minimal kickback High-grade tool steel for high accuracy and long life Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills Adapters shown in images are sold separately. 

HMT 308010-SET1 VersaDrive ImpactaTap 5 Piece Tap Set M6 M8 M10 M12 M16

308010-SET1 m6. m8, m10, m12, m16 Hex shank suitable for drills upto 10mm tap size can be driven by impact wrenches and impact drivers

HMT M10 x 1.5mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0100 m10 x 1.5mm Hex shank suitable for drills upto 10mm tap size can be driven by impact wrenches and impact drivers Adapters shown in images are sold separately 

HMT M12 x 1.75mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0120 m12 x 1.75mm Hex shank suitable for drills upto 10mm tap size can be driven by impact wrenches and impact drivers, Adapters shown in images are sold separately 

HMT M14 x 2.0mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0140 m14 x 2.0mm Hex shank suitable for drills upto 10mm tap size can be driven by impact wrenches and impact drivers, Adapters shown in images are sold separately 

HMT M16 x 2.0mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0160 m16 x 2.0mm Hex shank suitable for drills upto 10mm tap size can be driven by impact wrenches and impact drivers Adapters shown in images are sold separately 

HMT M6 X 1 VersaDrive Spiral Flute Combi Drill-Tap

301125-0060 m6 x 1 Fast Tapping with Minimal Kickback High-Grade Tool Steel for high accuracy & long life Ground Flute Twist Drill Creates the perfect Tapping Hole High Strength, Non-slip shank design Correct RPM is critical for good performance on larger drill taps For impact wrench use, pilot drilling the hole with a separate drill bit is necessary

HMT M8 x 1.25 VersaDrive Spiral Flute Combi Drill-Tap

301125-0080 m8 x 1.25 Fast Tapping with Minimal Kickback High-Grade Tool Steel for high accuracy & long life Ground Flute Twist Drill Creates the perfect Tapping Hole High Strength, Non-slip shank design Correct RPM is critical for good performance on larger drill taps For impact wrench use, pilot drilling the hole with a separate drill bit is necessary

HMT M10 X 1.50 VersaDrive Spiral Flute Combi Drill-Tap

301125-0100 m10 x 1.50 Fast Tapping with Minimal Kickback High-Grade Tool Steel for high accuracy & long life Ground Flute Twist Drill Creates the perfect Tapping Hole High Strength, Non-slip shank design Correct RPM is critical for good performance on larger drill taps For impact wrench use, pilot drilling the hole with a separate drill bit is necessary

HMT M12 x 1.75 VersaDrive Spiral Flute Combi Drill-Tap

301125-0120 m12 x 1.75 Fast Tapping with Minimal Kickback High-Grade Tool Steel for high accuracy & long life Ground Flute Twist Drill Creates the perfect Tapping Hole High Strength, Non-slip shank design Correct RPM is critical for good performance on larger drill taps For impact wrench use, pilot drilling the hole with a separate drill bit is necessary

HMT M5 x 0.8mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0050 m5 x 0.8mm Hex shank suitable for drills up to 10mm tap size can be driven by impact wrenches and impact drivers,  Adapters shown in images are sold separately 

HMT M6 x 1.0mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0060 m6 x 1.0mm Hex shank suitable for drills up to 10mm tap size can be driven by impact wrenches and impact drivers Adapters shown in images are sold separately 

HMT M8 x 1.25mm VersaDrive ImpactaTap Metric Coarse Thread

308010-0080 m8 x 1.25mm Hex shank suitable for drills upto 10mm tap size can be driven by impact wrenches and impact drivers Adapters shown in images are sold separately 

HMT 209015-0110 11mm VersaDrive TurboTip Impact Drill Bit

209015-0110 11mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 209015-0120 12mm VersaDrive TurboTip Impact Drill Bit

209015-0120 12mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Adapters shown in images are sold separately.

HMT 209015-0140 14mm VersaDrive TurboTip Impact Drill Bit

209015-0140 14mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately

HMT 209015-SET1 VersaDrive TurboTip Impact Drill Bit Set 6, 8, 10, 12mm

209015-SET1 6, 8, 10, and 12mm bits in box Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life

HMT M3 X 0.50 VersaDrive Spiral Flute Metal Combi Drill-Tap

301125-0030 m3 x 0.50 Fast Tapping with Minimal Kickback High-Grade Tool Steel for high accuracy & long life Ground Flute Twist Drill Creates the perfect Tapping Hole High Strength, Non-slip shank design Correct RPM is critical for good performance on larger drill taps For impact wrench use, pilot drilling the hole with a separate drill bit is necessary  

HMT M4 X 0.70 VersaDrive Spiral Flute Combi Drill-Tap

301125-0040 m4 x 0.70 Fast Tapping with Minimal Kickback High-Grade Tool Steel for high accuracy & long life Ground Flute Twist Drill Creates the perfect Tapping Hole High Strength, Non-slip shank design Correct RPM is critical for good performance on larger drill taps For impact wrench use, pilot drilling the hole with a separate drill bit is necessary

HMT M5 X 0.80 VersaDrive Spiral Flute Combi Drill-Tap

301125-0050 m5 x 0.80 Fast Tapping with Minimal Kickback High-Grade Tool Steel for high accuracy & long life Ground Flute Twist Drill Creates the perfect Tapping Hole High Strength, Non-slip shank design Correct RPM is critical for good performance on larger drill taps For impact wrench use, pilot drilling the hole with a separate drill bit is necessary

HMT 209015-0060 6mm VersaDrive TurboTip Impact Drill Bit

209015-0060 6mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 209015-0068 6.8mm VersaDrive TurboTip Impact Drill Bit

209015-0068 6.8mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life

HMT 209015-0070 7.0mm VersaDrive TurboTip Impact Drill Bit

209015-0070 7.00mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 209015-0080 8.0mm VersaDrive TurboTip Impact Drill Bit

209015-0080 8mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 209015-0085 8.5mm VersaDrive TurboTip Impact Drill Bit

209015-0085 8.5mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 209015-0090 9.0mm VersaDrive TurboTip Impact Drill Bit

209015-0090 9mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 209015-0100 10mm VersaDrive TurboTip Impact Drill Bit

209015-0100 10mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Use appropriate lubrication and correct RPM to achieve long tool life Adapters shown in images are sold separately.

HMT 209015-0105 10.5mm VersaDrive TurboTip Impact Drill Bit

209015-0105 10.5mm bit Hex shank suitable for use in any standard 1/2” drill chuck for cordless or pistol drills 50% Faster Drilling with 30% less pressure Instant drill start with no slipping fastest performance use on impact wrenches & impact drivers Suitable for use on Stainless Steel and harder materials if used at low RPM in rotary tools Adapters shown in images are sold separately.

HMT 9.5mm VersaDrive HSS-Cobalt Drill Bit

209010-0095 9.5mm any standard 1/2" drill chuck for cordless or pistol drill use 135 Split Point for easy starting and high accuracy 8% Cobalt for long life and endurance in structural steel and hard metals GoldMax Low Friction Titanium Coating to stop heat burn out

HMT 10.5mm VersaDrive HSS-Cobalt Drill Bit

209010-0105 10.5mm any standard 1/2" drill chuck for cordless or pistol drill use 135 Split Point for easy starting and high accuracy 8% Cobalt for long life and endurance in structural steel and hard metals GoldMax Low Friction Titanium Coating to stop heat burn out

HMT 11.5mm VersaDrive HSS-Cobalt Drill Bit

209010-0115 11.5mm any standard 1/2" drill chuck for cordless or pistol drill use 135 Split Point for easy starting and high accuracy 8% Cobalt for long life and endurance in structural steel and hard metals GoldMax Low Friction Titanium Coating to stop heat burn out

HMT 12mm VersaDrive HSS-Cobalt Drill Bit

209010-0120 12mm any standard 1/2" drill chuck for cordless or pistol drill use 135 Split Point for easy starting and high accuracy 8% Cobalt for long life and endurance in structural steel and hard metals GoldMax Low Friction Titanium Coating to stop heat burn out

HMT 6.5mm VersaDrive HSS-Cobalt Drill Bit

209010-0065 6.5mm any standard 1/2" drill chuck for cordless or pistol drill use 135 Split Point for easy starting and high accuracy 8% Cobalt for long life and endurance in structural steel and hard metals GoldMax Low Friction Titanium Coating to stop heat burn out

HMT 7.5mm VersaDrive HSS-Cobalt Drill Bit

209010-0075 7.5mm any standard 1/2" drill chuck for cordless or pistol drill use 135 Split Point for easy starting and high accuracy 8% Cobalt for long life and endurance in structural steel and hard metals GoldMax Low Friction Titanium Coating to stop heat burn out

HMT 5.0mm VersaDrive HSS-Cobalt Drill Bit

209010-0050 5.0mm any standard 1/2" drill chuck for cordless or pistol drill use 135 Split Point for easy starting and high accuracy 8% Cobalt for long life and endurance in structural steel and hard metals GoldMax Low Friction Titanium Coating to stop heat burn out

HMT 5.5mm VersaDrive HSS-Cobalt Drill Bit

209010-0055 5.5mm any standard 1/2" drill chuck for cordless or pistol drill use 135 Split Point for easy starting and high accuracy 8% Cobalt for long life and endurance in structural steel and hard metals GoldMax Low Friction Titanium Coating to stop heat burn out

HMT CarbideMax 40 Broach Cutter Pilot Pin 12-17mm Cutters Pack of 2

108030P-0170 6.34 x 90mm pack of 2 to suit 12-17mm max40 cutters High quality, fully ground HSS pilot ejector pin for CarbideMax 40 TCT Broach cutters

HMT CarbideMax 40 Broach Cutter Pilot Pin 12-17mm Cutters Pk10

108030P-0170-p10 6.34 x 90mm pack of 10 to suit 12-17mm max40 cutters High quality, fully ground HSS pilot ejector pin for CarbideMax 40 TCT Broach cutters

HMT CarbideMax 40 Broach Cutter Pilot Pin 18-80mm Cutters Pack of 10

108030P-0600-p10 to suit 18-80mm cutters pack of 10 7.98 x 90mm High quality, fully ground HSS pilot ejector pin for CarbideMax 40 TCT Broach cutters

HMT 111130-012A VersaDrive 1/2" Drive Rapid-Lock Impact Wrench Adaptor

111130-012A 1/2 adaptor Converts standard 1/2” Impact Wrenches for use with VersaDrive Improved Quick Release collar that prevents accidental tool release caused by vibrations or contact with the work-piece Simply push any VersaDrive™ tool into the adapter which securely locks onto the shank

HMT CarbideMax 40 TCT Magnet Broach Cutter

CarbideMax™ 40 Series will broach up to 35mm thickness of metal CarbideMax™ TCT Broach cutters are tipped with individually brazed cutting teeth of the highest quality carbide  

HMT 103011-0001 Magnetic Swarf Lifter

103011-0001 swarf lifter 400mm length    

HMT 108020P-0600 CarbideMax 55 Broach Cutter Pilot Pin

108020P-0600 fully ground HSS pilot ejector pin for CarbideMax 55  

HMT 55mm Deep VersaDrive TCT Hole Cutter

Hole Maker Technology (HMT) 101030  VersaDrive TCT Hole Cutter  55mm Deep Use in any standard drill chuck Massive 70mm reach with 55mm depth of cut 10x greater than standard bi-metal "starrett" type holesaws Rated for steel, structural steels, stainless steel (inox), Aluminium, Cast Iron, Brass, Copper, Fibreglass, composite and sandwich materials, plastics, and wood

Sealey AK689 10 Piece Impact Socket Set 1" Drive Deep Metric & Imperial

24, 27, 30, 32, 33, 36, 38, 41mm, 1", 1-1/8". 1" square drive. Deep Sockets. Impact. Manufactured from Chrome Molybdenum steel with manganese phosphate finish for added corrosion resistance. Supplied with case.

Sealey AK687 13 Piece Impact Socket Set 3/4" Drive Deep

Contains the following sizes 22, 24, 27, 30, 32, 33, 34, 36, 38mm, 1", 1-1/8", 1-3/8", 1-7/16". 3/4" square drive. Deep sockets. Impact. Manufactured from Chrome Molybdenum steel with manganese phosphate finish for added corrosion resistance. Supplied with case.

Milwaukee M18FMDP-0C 18v Mag Drill Cordless Fuel Magnetic Drill Body Only In Carry Case

Supplied as the body only in carry case. 18 volt no load speed  400 / 690 8890 magnetic power 38mm cutter capacity 50mm depth capacity stroke length 146mm

Milwaukee M18ONEFHIWF34-0 18V 3/4 Impact Wrench - Cordless, 2034Nm High Torque Unit Only

M18ONEFHIWF34-0 18v bare unit impact rate 0-850/0-1850/0-2400/0-2400 fastening torque 1627nm no load speed 0-800/0-1300/0-1800/0-1800 busting torque 2034nm

Milwaukee M18ONEFHIWF12-0 18v Cordless 1/2" 1898nm High Torque Impact Wrench Friction Ring One Key Body Only

M18ONEFHIWF12-0 18v Body Only friction ring end 4 mode wrench mode 1 130nm mode 2 400nm mode 3 1356nm mode 4 1898nm nut busting torque brushless motor led light

Milwaukee M18ONEFHIWF34-502X 18v Cordless 3/4 2034nm High Torque Impact Wrench 2 x 5.0ah Batteries

M18ONEFHIWF34-502X - contains M18onefhiwf34-0 machine m18b5 x 2 batteries m12-18fc fast charger dynacase impact rate 0-850/0-1850/0-2400/0-2400 fastening torque 1627nm no load speed 0-800/0-1300/0-1800/0-1800 busting torque 2034nm Weight with battery pack (kg) 3.5    

Makita DGA900Z Twin 18v 36v Cordless Angle Grinder 230mm Body Only

Brushless motor. Runs of 2 x 18v batteries. 230mm disc size. Electronic current limiter for overload protection. Electric  brake. Anti restart function.

Makita GA4530R 115mm 4 1/2 Inch Angle Grinder 110v 720 Watt

115mm disc size. 22.23mm bore size. 720w input wattage. 11000rpm no load speed. 1.8kg weight. Anti restart function and soft start. Ergonomic 20 degree side grip handle.

Makita DTW1002Z 18v Cordless 1/2 Drive Impact Wrench LXT 1000nm Torque Body Only

1600Nm nut busting torque, 1000Nm max fastening torque. No Load Speed (hard/med/soft) 0 – 1,800 / 1,000 / 900  rpm.   Electronic 3-stage impact power selection (Hard/Medium/Soft).   3.6kg weight.   Blows per minute: 0-2200 ipm high, 0-2000 imp med, 0-1800 ipm low.   Standard Bolt M12-M30.  High Tensile Bolt M10-M24.  

Makita DTW1002RTJ 18v 1/2 Impact Wrench 2 x 5.0amp Batteries Charger Case

dtw1002z 2 x 5.0 amp batteries 1 x dc18rc charger Makpac Case 1600Nm nut busting torque, 1000Nm max fastening torque. No Load Speed (hard/med/soft) 0 – 1,800 / 1,000 / 900  rpm.   Electronic 3-stage impact power selection (Hard/Medium/Soft).   3.6kg weight.   Blows per minute: 0-2200 ipm high, 0-2000 imp med, 0-1800 ipm low.   Standard Bolt M12-M30.  High Tensile Bolt M10-M24.

Makita DTW1001Z 18v LXT Brushless Impact Wrench 3/4 Drive Body Only

1050Nm max fastening torque. 1700Nm nut busting torque (loosen a bolt which is tightened to 1700Nm) 3/4 inch square drive fitting. Electronic 3-stage impact power selection (Hard/Medium/Soft). Brushless motor. Electric brake.

Makita DTW1001RTJ 18v Cordless 3/4 Impact Wrench LXT Brushless 2 x 5.0Ah Batteries

Supplied with 2 x 5.0Ah batteries, charger and carry case. 1050Nm max fastening torque. 1700Nm nut busting torque (loosen a bolt which is tightened to 1700Nm) 3/4 inch square drive fitting. Electronic 3-stage impact power selection (Hard/Medium/Soft). Brushless motor. Electric brake.

Milwaukee M18FMDP-502C 18v Cordless Mag Drill Magnetic Drill Permanent Magnet 2 x 5.0ah Li-on Batteries Charger + Case

M18FMDP-502C 2 x m18b5 batteries charger + carry case 18 volt no load speed  400 / 690 8890 magnetic power 38mm cutter capacity 50mm depth capacity stroke length 146mm

Makita DGA452Z 18v Angle Grinder Cordless 115mm 4 1/2 Inch Bare Unit

Sold without the box. DGA452Z 18v body only machine. 115mm disc size. 10,000 rpm. 2.3kg weight. 4 pole motor.

Milwaukee Shockwave 1/2" square drive sockets

6 gripping points. 1/2 inch square drive socket. Thin walled sockets. Various sizes available. Impact duty sockets. Lazer etched size markings.

Makita GA9020S 230mm Angle Grinder With Soft Start 110v Or 240v

230 x 22.23 bore size. M14 thread. 2000w motor. 5.8kg weight. 6,600 rpm. Features soft start. 110 volt not supplied with a plug due to wattage size. Supplied in Makita cardboard box.

Impact Socket Supplies 24mm Open End Podger Spanner

Open End podger spanner. Without tethering rings. Head length 4cm. Overall length 37.5cm. Picture for illustration purposes, as it is not the correct size.

Impact Socket Supplies 36mm Open End Podger Spanner ISS

Open End podger spanner. Without tethering rings. Tapered shank. Picture for illustration purposes, as it is not the correct size.

Impact Socket Supplies 19mm Open End Podger Spanner

Open End podger spanner. Without tethering rings. Head length 4cm. Overall length 36cm. Picture for illustration purposes, as it is not the correct size.

Impact Socket Supplies 30mm Open End Podger Spanner

Open End podger spanner. Without tethering rings. Head length 5.5cm. Overall length 39cm. Picture for illustration purposes, as it is not the correct size.

Makita Tek Gun FS2500 110V Construction Screwdriver 570 Watt

1/4 Hex shank. Drywall screw 5mm. Self drilling screw 6mm. 0-2500 rpm. Torque 17/29nm. 1.5kg weight. 570 watt motor.

Makita 6906 110v 3/4 Corded Impact Wrench 588nm Torque Nut Runner In Carrying Case

6906 3/4 inch square drive impact wrench. 110 volt machine. 1600 impacts per minute. 588nm torque. 800w motor. 5.6kg weight. Ideal for tightening and loosening bolts and nuts. Suitable for use with the following sized bolts m16-m22. Steel erectors. Supplied in a metal Makita carry case.

Makita Performance Masonry TCT Drill Bits 15mmx150mm

High quality drill bit. Suitable for use with percussion drills. Ideal for drilling brick, stone, block, or light concrete. Features a Tungsten Carbide tip made to DIN8039 standard.

Milwaukee 1/2" Shockwave Deep Impact Socket

Milwaukee 4932480326 8mm to 30mm 1/2" Shockwave Deep Impact Sockets Shockwave Impact Duty steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength durability. Best fitting thanks to 6 gripping points. Non-slip hex geometry to prevent socket and fastener rounding, Deep wall construction provides clearance for protruding bolts. Stamped and ink filled diameter marking and laser etcher part number for wear resistance. Dual hole design and groove for security accessories.

Impact Socket Supplies 3/4 Drive Deep Impact Sockets

Ideal For Steel Erecting Hexagon Deep 6 Point Socket Forged From Chrome Vanadium steel Hardened 3/4 SQ Drive

Lenox Bi Metal Holesaws For Steel & Wood

Lenox Hole saw for drilling Holes into Steel Wood or Plastic BI-Metal Variable Tooth Pitch Fast clean Cutting

Alfra Magnetic Rotabroach Cutters Short 25mm

Short Reach Magnetic cutter Ideal for drilling Holes Into Steel With Universal 19mm Shank Made From Special High Speed Steel with Cobalt 6.35 Internal Bore

Alfra Magnetic Rotabroach Cutter 50mm Long

Long Reach Magnetic cutter Ideal for drilling Holes Into Steel With Universal 19mm Shank Made From Special High Speed Steel with Cobalt 6.35 Internal Bore