Sealey LP41 Propane Space Heater Gas Heater 40,500BTU/HR

Propane space heater. There is no odour, except for the few seconds during start-up and the units run a little more quietly since they do not need a compressor to drive the fuel to the burner. Fan assisted, fitted with a piezoelectric ignition system for trouble-free starting and features a direct gas head assembly. Features safety solenoid preventing the unit from leaking gas without first being electrically started. Supplied with an approved propane gas regulator and hose.

Makita 195526-6 Linetrimmer Attachment For EX2650LH

195526-6. Linetrimmer. Fits the ex2650LH spilt shaft unit.

Makita DRT50ZX4 18v Cordless Router Trimmer Brushless Body Only

Brand new out Sept 2017! Brushless motor. Runs off the Makita 18v batteries (not supplied). 0-40mm plunge capacity trimmer. 0-35mm plunge capacity plunge. 3/8" and 1/4" collet capacity. Supplied in cardboard box.

Makita JV103DZ 10.8v CXT D Handle Jigsaw Bare Unit

JV103DZ supplied with Jigsaw blade Hex wrench 10.8v slide type battery (not supplied) Capacity in Aluminium 20mm Capacity in Mild Steel 10mm Capacity in Wood 90mm Stroke Length 23mm Settings 3 orbital + straight cut variable speed soft start Bevel capacity 0 - 45 degrees Left / Right

Trend KWJ900 Kitchen Worktop Jig 900mm

Fixed lengths for 400mm, 500mm, 550mm, 600mm, 616mm, 650mm, 700mm and 900mm wide worktops. Cuts up to 40mm thick worktops with or without anti-drip postformed edge. 10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up. Hard wearing solid laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up. Left hand and right hand corners, 400mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps.

Trend DWS/KIT/B Diamond Whetstone Honing & Polishing Kit

Contains: 8 x 3 " bench stone in pouch, honing guide set, lapping fluid, honing compound bar and strop, cleaning block, non slip mat, DVD and booklet. Ideals for sharpening chiseld, plane blades and hand tools. Honing guide ensures the correct angles are maintained. Honing compound and leather strop gives a highly polished finish.

Makita DML805 LED Worklight Cordless Or 240v

Can be powered by both AC and DC(14.4v/18v Li-ion battery). Batteries not included. Battery capacity warning lamp. 360 degrees vertical light angle adjustment. Twenty 0.5W white-light LEDs; deliver bright and even light. Carrying handle for easy transport that also serves as a hanging hook. Power supply cord 2.5m.

Milwaukee Bluetooth Speaker M12-18JSSP-0 Cordless Bluetooth Speaker M12-M18 Body Only

Bluetooth wireless range of up to 30m. Works with Milwaukee M12 and M18 batteries. IP54 rated, water and debris resistant to withstand tough conditions on and off the jobsite. 2.1A USB charger, charges phones, tablets and media players. Premium speaker with bass port. Loud, clear sounds at all volumes.

Milwaukee M18SLED-0 18v Cordless Search Light Work Light Body Only

1250 lumens spot flood 4 hours. 1200 lumens flood 4 hours. 1200 lumens 5 hours strobe. 600 lumens 7 hours spot. Up to 650m beam distance. Pivoting head.

BL1850 18V 5.0Ah Lithium-Ion Battery Twin Pack – Compatible with Makita Tools

Makita BL1850 18v 5.0ah battery. 45 minute charge time. Longer run time and battery life. Works with existing chargers. This is a genuine Makita battery direct from Makita. Please be aware there are a few counterfeit batteries available to buy online. Be assured these are the genuine Makita battery. Full 1 year warranty applies on this product.

Milwaukee 18v Cordless Jigsaw M18BJS-0 18v Jigsaw Brushed D Handle Body Only In Cardboard Box

Milwaukee® patented FIXTEC blade clamp for fast and easy blade change. Milwaukee® high performance motor delivers 2800 spm for fast cutting. Keyless bevel facility on the base plate allows for adjustment between 0 - 45°. Five stage pendulum action for increased cutting performance. Dust blower keeps the cut line free of wood dust. Detachable soft shoe avoids marks and scratches when cutting soft materials.

Makita DJR186Z 18v Cordless Reciprocating Saw Body Only

Tool less blade change. Electric brake. Trigger switch with lock off lever. Variable speed. 255mm cutting capacity in wood and 130mm in mild steel pipe.

Festool 576795 Domino Connector Range SV-SYS D14 For DF700

201353 - Contains 32 anchor bolts, SV-AB D14 16 double-headed bolts, SV-DB D14 32 split anchors, SV-SA D14 32x Domino birch D 14 x 75 2x 32 cross anchors, SV-QA D14 SW 4 pin wrench for tightening the set screws SV-V D14 widener for 32 cross anchors 32 cover caps, silver, SV-AK D14 slr 32 cover caps, dark brown, SV-AK D14 brn1 32 cover caps, light brown, SV-AK D14 brn2 SYSTAINER SYS 2 T-LOC

Festool SYS-PowerHub Systainer SYS-PH 240 Volt 200234

200234 Cable length 10m Dimensions (L x W x H) 396 x 296 x 157.5 mm Power consumption 2500w Weight 4.2kg Safety class ip44 Number of sockets 5

Beta Tools 111 Adjustable Wrench Chrome Plated

Printed with scale on it in mm and Inch. Right handed rotation of the pin. Chrome plated. Max jaw capacity 200mm is 28mm. 250mm is 34mm, 300mm is 35mm, 380mm is 45mm, 450mm is 54mm and 600mm is 62mm

Makita DTM51Z 18v Cordless Multi Tool Body Only Keyless Blade Change

DTM51Z Body Only. Runs off the Makita 18v batteries. Max output 390w. Oscillations per Minute 6,000 - 20,000.   Similar to the DTM50Z but this machine features a keyless blade change.  

Festool 498979 10 Piece Router Bit Set Box-OF HW S8 Mix

498979 Flush trim cutter HW D12.7/NL25 KL dowel drill HW D5 x 30 Z Groove cutter HW D10/20 with drill point groove cutter HW D18/30 with drill point Round over cutter HW D16.7/R2 KL classic ogee cutter HW D25.5 R6.3 KL Roundover cutter HW D31.7/R9.5 KL chamfer cutter HW D36/45Grad KL disc groove cutter HW D40 x 4 dovetail cutter HW D14.3/15° in carton

Milwaukee C12MT-0 12v Cordless Compact Multi Tool Body Only

1 x sanding pad 12 sanding discs 1 x wood cutting blade adaptor for bosch and fein blades C12MT-0 12 Volt Multi tool Variable speed 12 speed settings 5,000 to 20,000rpm fuel gauge to show the remaining battery life.

Makita DHS680Z 18v Cordless Brushless Circular Saw 165mm Body Only

680w max output. 165mm blade diameter. 20mm bore. 5000 rpm no load speed. Max Cut @ 0º 57mm.   Max Cut @ 45º 41mm.   Max Cut @ 50º 37mm.

Makita DTM51ZJX7 18v Cordless LXT Multi Tool Kit Body Only in Makpac Case

Tool less accessory change system. Adaptor, Segment Saw Blade, Abrasive Paper 60 Grit x5, 80 Grit x5, 120 Grit x5, 180 Grit x5, Sanding Pad, Tool Box. Supplied in MAKPAC case. 6,000 - 20,000 oscillations per minute.   Runs off 18v li-ion batteries not supplied.

Festool FSK420 420mm Cross Cutting Guide Rail 769942

Cross cutting guide rail FSK 420 Weight 1.26 kg Angular range -60 – +60 ° Cutting length 420 mm Comes in box Fits HKC 55, HK 55, HK 85

Milwaukee C12RT-0 12v Cordless M12 Sub Compact Rotary Tool Body Only

0.8-3.2mm collet fits most accessories. 5000 - 32000rpm variable speed. Spindle lock for easy accessory changes. Fuel gauge to show remaining charge. For use with M12 batteries, not supplied.

Milwaukee M18BSX-0 18v Cordless Recip Saw Sawzall Brushed Body Only

3000 spm delivers up to 35% faster cutting. 28mm stroke length. Reduced vibration. Up to 1.5 times cuts per charge than competitive cordless recip saws. Up to 5% longer tool life. Adjustable shoe. Fixtec keyless blade change.

Milwaukee M18BRAIW-0 18v Cordless Brushed Right Angle Impact Wrench Body Only

Redlink overload protection electronics. Metal gearbox. 76Nm max torque when used with 5.0Ah battery (not supplied) 2 speed settings. 3/8 inch square drive. Supplied as the body only.

Makita DGA504Z 125mm 18v Cordless Angle Grinder Bare Unit

Brand new out for January 2015. Brushless dc motor. Controller built into the machine controls the cutting speed depending on the load. High torque on heavy duty applications and high speed rotation on light duty jobs. 8500 rpm no load speed. 2.5kg net weight. 125mm diameter disc size and 22.23mm bore size.

Makita DJV182Z 18v Brushless Cordless LXT Jigsaw Body Only

Brushless motor. Twin led job light. Soft grip D handle. Blower function to clear wood dust from the cutting line. Soft start and variable speed control. Tool less blade change.

Milwaukee M12BPS-0 12v Cordless sub compact polisher / sander body only

Supplied as the machine only, runs off the Milwaukee 12v batteries. Redlink overload protection. Detachable 2 position side handle. Use with up to 76mm polishing sponge and 50mm sanding pad. Variable 2 speed selection 0-2800/0-8300 rpm. Spindle lock for fast tool free accessory changes. No load speed rpm 2500/7500. 0-2800 / 0-8300 RPM 0-2800 / 0-8300 RPM

Milwaukee M12CHZ-0 M12 12v Fuel Cordless compact Hackzall Recip Saw body only

Supplied as the machine only in cardboard box. Features brushless powerstate motor for up to 6 times longer motor life and up to 70% faster cut in certain applications. Redlink plus intelligence system for the most advanced digital overload protection. Milwaukee fixtec clamp for fast and easy blade changes. Led light. Sealed gearbox. 15.9mm stroke length. 0-3000 no load stroke rate.

Milwaukee Mitre Saw Leg Stand MSL1000 Lightweight Foldable Aluminium Stand

Will hold up to 180kg. 2.08m when extended. Can be extended both sides. Quick release brackets. 1.08m total length. One point leg adjustment for uneven ground. Folds down. Height adjustable length stops.

Makita DSS611Z 18v Cordless Circular Saw 165mm Body Only

165mm blade diameter with 20mm bore size. 3700 rpm no load speed. Max cut at 90 degrees 57mm, at 45 degrees 40mm and at 50 degrees 36mm. 3.3kg net weight. Suitable for use with the BL1830 3.0ah and BL1840 4.0ah batteries, and BL1850 18v 5.0ah not supplied.  

Makita Sub Pump PF1110/2 Submersible Drainage Pump For Dirty Water 240v

Maximum delivery 250 litres/min. Stainless steel body. 1100w input wattage. Ideal for drainage basins with muddy water, wells and tanks, lifting water for irrigation or transfer. 7.0kg net weight. 35mm max solids diameter.

Makita UC4041A Electric Chainsaw 1800 Watt 40cm 16 Inch Bar Length 240v

UC4041A chainsaw. 1800 watt motor. 40cm bar length. 4.7kg weight. 3/8 chain pitch. 0.043 chain gauge. 200ml oil capacity.

Makita DJV180 18v Cordless Jigsaw 18v Brushed Jigsaw Body Only Machine

DJV180Z body only jigsaw. Runs off the Makita 18v li-ion batteries. Max in steel 10mm, in wood 135mm. Stroke length 26mm. Tool-less blade change. Net weight 2.8kg.

Makita DKP180Z 18v Cordless Planer 18V LXT Planer Body Only

DKP180Z Body only. 82mm planing width. Planing depth 2.0mm. Max rebate 9.0mm. 3.4kg weight. Supplied in cardboard box.

Premier Diamond Products DP16738 9 Inch 230 x 22.2mm Root Cutting Angle Grinder Carbide Terrsaur Blade P6-TS

DP16738. 230mm x 22.2mm x 3.5mm. Ideal for roots, soil, railway sleepers, small trees and branches. For use on a hand held angle grinder. Carbide cluster blade.

Premier Diamond Products DP16740 300mm x 20mm Stonesaw Root Cutting Terrasaur Root Cutting Blade

DP16740. 300mm x 20mm x 3.8mm. Ideal for roots, soil, railway sleepers, small tress and branches. For use on a hand held stonesaws. Carbide cluster blade.    

Makita DGA452Z 18v Angle Grinder Cordless 115mm 4 1/2 Inch Bare Unit

Sold without the box. DGA452Z 18v body only machine. 115mm disc size. 10,000 rpm. 2.3kg weight. 4 pole motor.

Makita DDA351Z 18V LXT Angle Drill Body Only

Keyless chuck. Large trigger. Led job light. 13.7Nm max torque. 25mm max in wood, 10mm max in steel. 0 - 1800 rpm no load speed.

Milwaukee M18BIW12-0 18v Cordless 1/2 Impact Wrench 240NM Torque Body Only

Max torque 240Nm. 0-2450 rpm no load speed. 0-3350 impact rate. High performance 4 pole motor. Redlink overload protection electronics. Heavy duty full metal gearbox.

Milwaukee M18BMT-0 18v Cordless Multi Tool Cordless Brushed Multi Tool Bare Unit

Please note this is the machine only no batteries supplied. Register online for extended 3 year warranty within 28 days of purchase. 18v machine. Variable speed, 12000-18000 rpm no load speed. 1.7 degrees oscillation angle left to right. Will accept other manufacturers accessories. Fixtec tool free blade change. Led worklight.

Makita DSS610Z 18v Cordless 165mm Circular Saw Body Only

Can be used with the new BL1840 18v 4.0Ah li-ion batteries and BL1850 18v 5.0Ah. Please note supplied without the box. Body only circular saw. (no batteries). 360w power output. Built in blow off nozzle which moves sawdust from the cutting line. 165mm diameter blade with 20mm bore. 3700 rpm no load speed.

Makita GA9040S 9"/230mm Angle Grinder With Soft Start 110v Or 240v

230mm wheel size with 22mm bore. 2400w input wattage. 6600rpm no load speed. Features soft start. Rotatable rear handle. Large trigger switch. 110v machine will not come with a plug.

Makita BO6030JX1 Random Orbit Sander With 53 Accessories In Makpac Case 110v or 240v

Sander available in 110v and 240v machines. Variable speed control. Ergonomically designed with two handles. 310w input wattage. 4000-10000 orbits per minute. Supplied with dust bag, 60 grit x 2 packs of 10, 80 grit x 10, 120 grit x 10, 240 grit x 10, sponge with velcro P-21749, 794619-2 150mm wool pad.

Makita DHR202Z 18v Cordless SDS+ Rotary Hammer Drill Body Only Machine

Max in steel 13mm, in wood 26mm, in concrete 20mm. 2.0 impact energy. 3.5kg weight. 0-1,100 rpm no load speed. SDS plus shank. Will take 4 amp batteries.

Milwaukee 6 Dock Charger 110v M1418C6 14v-18v M18 Multi Bay Charger

Can be used to charge 6 x M18 batteries. Carry handle. Charges M18 1.5Ah batteries in 30 minutes, 2.0Ah batteries in 40 minutes, 3.0Ah batteries in 60 minutes and 4.0Ah batteries in 80 minutes. Features a by-pass mode to choose the battery bay that gets charged first. 110v plug fitted.

Makita LW1401S 355mm Abrasive Cut Off Saw 110v Or 240v Was 2414EN

1650 watt input wattage. 115mm maximum cutting capacity. 355mm blade size with 25.4mm bore. 3800rpm no load speed. 18.4kg net weight. Was 2414EN. The safety cover, safety guard, spark guard and quick vise are redesign of those of 2414NB.

Milwaukee M18GG 18v Grease Gun Cordless Grease Gun Heavy Duty Bare Unit 4933440493

Register online within 28 days of purchase for extended 3 year machine warranty 620 bar max operating pressure. Can dispense up to 6 x 400ml grease cartridges in one run time. 1219mm high pressure flex hose with spring guard. It features Redlink overload protection. Air bleeder valve for priming, and bulk filler valve. Please note it is supplied without batteries.

Milwaukee M1418C6 14v-18v 6 Dock Multi Port Battery Charger 240v

Can be used to charge 6 M18 batteries. No Box. Carry handle. Charges M18 1.5Ah batteries in 30 minutes, 2.0Ah batteries in 40 minutes, 3.0Ah batteries in 60 minutes and 4.0Ah batteries in 80 minutes. Features a by-pass mode to choose the battery bay that gets charged first. 240v.

Milwaukee M12GG-0 12v Cordless Grease Gun Unit Only

562 bar maximum operating pressure. Can dispense up to 7 cartridges in a single charge. Weight 3.2kg. 355mm long. Body only - does not come with any batteries.

Festool DF500 Domino Beechwood Assortment Set – DS 4/5/6/8/10, 1060x BU 576794

498899 DOMINO 4 x 20, 5 x 30, 6 x 40, 8 x 40, 8 x 50, 10 x 50 mm DOMINO router cutters for sizes 4, 5, 6, 8 and 10 1060 Pieces SYSTAINER SYS 2 T-LOC

Festool DF700 Domino Set Beechwood Domino Set Assortment DS/XL D8/D10 306x BU 576791

498204 - contains DOMINOs 8x50, 8x80, 8x100, 10x50, 10x80, 10x100 DOMINO XL cutter for sizes 8 and 10mm dowel range Supplied in a Festool systainer. For DF700

Makita PJ7000 Biscuit Jointer With Carry Case 240v Or 110v

700w input wattage. 11,000rpm no load speed. Slim body which is easy to grip. The top handle gives extra control. Its lightweight design makes is easy to manoeuvre. 110v and 240v.

Makita 18v Multi Tool DTM50Z 18v Cordless Multi Tool Body Only

DTM50Z multi tool 18v machine only was the BTM50Z. Can be used with the BL1840 4.0ah batteries and BL1850 18v 5.0. 6000-20000 oscillations. Oscillation angle 3.2`. Supplied in cardboard box. 2.0kg weight.

Sealey BG200XL 200mm (8") Bench Grinder – 560W, 240V

Fitted with a high powered induction motor. Aluminous oxide grinding wheels. Equipped with safety guards. ASTA/BS approved safety plug.

Festool 498660 Systainer Transport Trolley SYS-Roll 100

Roll board function for the workshop and sack barrow function for the site. Ideal for transporting systainers. The large wheels at the back make it easier for travelling up and down stairs. The front wheels are fully rotatable and can be locked aswell. Drawer at the bottom for carrying up to 5kg of tools. Also included the safety belt to hold the systainers on.

Sealey SDM30 5 Speed Pillar Drill 580mm 240v Hobby Model

580mm overall height. 580-2650rpm speed range. 5 speeds. 185W (350W) motor power (start). 13mm chuck size. 16kg weight.  

Makita RP0900X 1/4" Or 3/8" Plunge Router 110v or 240v In Carry Case

0-35mm plunge capacity. 900w input wattage. 27,000 rpm no load speed. Supplied with straight guide, 13mm and 22mm wrench, collet cone 1/4" and 3/8" and case. Available in 110v and 240v. Can be connected to a dust extractor.

Sealey MIGHTYMIG100 100amp No Gas Welder 240V

100A max current. 0.9kg wire capacity. 60% @ 55A, 20% @ 90A duty cycle. Forced air cooling system. 14.5kg weight. For use with 0.9kg gasless wire reels only.

Sealey MIGHTYMIG150 150amp Mig Welder Gas/No Gas 230v

150A maximum current. For use with 0.9kg gasless and 0.7kg mild steel wire reels only. 100% @ 30A, 15% @ 105A duty cycle. Forced air cooling system. 230V - 1ph supply. 4.5Kw absorbed power.

Makita MLS100 255mm 1500 Watt Compound Mitre Saw 110v and 240v

Mls100 255mm Features a built in dust collection system. Maximum mitre range 45 degrees left and right. 1,500w input wattage. 4,200rpm no load speed. Supplied with a 255mm blade, dust bag, holders, vertical vice, triangular rule and spanner.  

Sealey LP100 Propane Space Heater Space Warmer 61000-102000Btu/hr (18-30kw) 240v

The fuel is almost completely burned and doesn't leave an oily residue like paraffin. The only odour is when the machine is starting up. This space heater is fan assisted and has a piezoelectric ignition for easy starting. The front foot can be adjusted to alter the height. Safety solenoid prevents the unit from leaking gas. Supplied with an approved gas regulator and hose.

Makita KP0810K 82mm Heavy Duty Electric Planer In Case 110v Or 240v

KP0810K Planing width 82mm, planing depth 4mm. 850w input wattage. 23mm maximum rebate depth. Available in 110v and 240v. Supplied with 9mm socket wrench, guide rule, blade gauge, dust bag and case.

Milwaukee 18v Circular Saw HD18CS-0 18v Cordless Circular Saw 165mm Body Only

Milwaukee 18v cordless circular saw. Comes with a parallel fence, dust port, allen key, rip fence 165mm 24 teeth saw blade. 3.8kg weight. 55mm depth cut at 90. 39mm depth cut at 45. 3500 rpm no load speed.

Milwaukee 12v Pipe Cutter C12PC Cordless Copper Pipe Cutter Body Only

Milwaukee copper pipe cutter 12v body only. 360mm length, 1.5kg weight. 80mm min space for tube cutting. Cuts copper tube 12mm, 15mm, 18mm, 22mm, 25mm and 28mm. The jaws adjust automatically to the size of pipe. Features fuel gauge and LED work light.

Milwaukee C18RAD-0 18v Cordless Angle Drill (body only)

Body Only Machine No Batteries 18v. 15nm torque. 1.0-10mm chuck. 1.9kg weight. 10mm steel / 28mm wood.

Makita BO6030 150mm Random Orbital Sander

BO6030 110v or 240v Variable speed control. Ergonomically designed with two handles. 310w input wattage. 4000-10000 orbits per minute. Supplied with dust bag, wrench, rubber pad and a hook and loop abrasive disc in cardboard box.

Makita DFR750Z 18v Cordless Auto Feed Screwdriver Body Only

Larger capacity of the 2 auto feed screwdriver machines. Max drywall screw 4mmx 75mm. Screw range 45-75mm. Runs off the Makita 18v li-ion batteries. Charge time is 22 mins. Sold as the body only.

Makita 9911 Belt Sander 3" 76mmX457mm 650 Watt

Features variable speed control. Dust bag for less mess. Suits 76mmx457mm belts. 650w input wattage. 2.7kg weight. Available in 110v and 240v. Comes with 1 belt on machine. Supplied in a cardboard box.

Farmpower Crocodile Clip Workshop Kit 28 Piece

10, 25, 30 amp. 6 popular sizes. 28 piece. Supplied in a plastic case.

Makita DTW251Z 18V Cordless Impact Wrench 1/2 Drive Body Only

DTW251Z Body only replaces BTW251Z. 230NM torque. 1/2" square drive. Body only machine. 1.5kg weight. 0-3,200 impact a minute. Takes makita bl1830, bl1840 and bl1850 batteries.

Makita DA3010 Rotary Angle Drill 240v In Cardboard Box

Max in steel 10mm. Max in wood 25mm. 0-2400rpm. 450w motor. 1.6kg weight.

Makita Jigsaw 4350FCT Orbital Action With Light + Carry Case 3 Pin Uk Plug 240v

Makita 4350fFCT with built in light. Cut in wood 135mm, in steel 10mm Length of stroke 26mm. 800-2,800 spm. 720w motor. 2.6kg. Supplied in a Makita carry case.

Makita Tek Gun FS2500 110V Construction Screwdriver 570 Watt

1/4 Hex shank. Drywall screw 5mm. Self drilling screw 6mm. 0-2500 rpm. Torque 17/29nm. 1.5kg weight. 570 watt motor.

Stabila STB96-2 3 Vial Spirit Level

Ultra-rigid aluminium profile with reinforcing ribs – for high stability and secure hold while working. Two vertical vials for quick readings in any position. End caps with an anti-slip stopper – for a firm seat when marking. Shock-absorbing end caps – the two-component material mix protects the profile against impact. Removable end caps – exact positioning and marking right up into the corners. Easy to clean thanks to the electrostatic powder coating. Spirit level with two precision-milled measuring surfaces (coated from 183 cm). Accurate measuring in all positions. STABILA installation technology ensures long-term accuracy – measuring accuracy in normal position is ± 0.5 mm/m and ± 0.75 mm/m in reverse position. Equipment: 1 horizontal vial, 2 vertical vials, 2 measuring surfaces. All STABILA vials are guranteed for 10 years.

Hozelock 40m Wall Mounted Auto Reel Retractable Garden Hose Reel 40mtr With Fittings 2595

Wall mounted automatic rewind hose reel Maxi Pro hose included Complete with all water and wall fittings Swivels 180 degrees from the wall. Supplied with a nozzle, hose connector, water stop and tap connector as-well as all wall fittings. Best selling range of hose.

Festool 496120 CT26 LongLife Filter Bag Longlife-FIS-CT26

3 layer Long Service life Filter Bag For non hazardous dust to health ctl26e extractor